2011.5 Citroen C4 ECU

164
Safety













"ISOFIX" mountings
with the latest
ISOFIX regulations.The seats, represented below, are fitted with
regulation ISOFIX mountings:


- two rings
A, located between the vehicle seat back and cushion, indicated by a label,

- a rin
g B , behind the seat, referred to as theTOP TETHER
for fixing the upper strap. This IS
OFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.

The ISOFIX child seatsare fitted with two latches which are easily secured on the two
rings A .
Some also have an upper strapwhich isattached to ring B.
To attach this strap, raise the vehicle seat's
head restraint then pass the hook between its
rods. Then fix the hook on ring Band tighten
the upper strap.
The incorrect installation of a child seat in a vehicle compromises the child'sprotection in the event of an accident.

For information regarding the ISOFIXchild seats which can be installed in your vehicle, refer to the table showing the locations for installing ISOFIX child seats. There are three rin
gs for each seat:

165
6
Safety
















ISOFIX child seat recommended by CITROËN and approved for your vehicle

These child seats can also be used on seats which are not fitted with ISOFIX mountings.
In this case, they must be attached to the vehicle seat using the three point seat belt.Follow the instructions for fitting the child seat given in the seat manufacturer's installation guide.


CITROËN offers a range of child seats secured using the ISOFIX mountings.
Group 0+: up to 13 kg
IL1RÖMER Baby- Safe Plus and its Baby- Safe plus ISOFIX base
Installed in the rear wards-facing position using its ISOFIX base, which is attached to the rings A.The base has a height-adjustable stay.
IL2FAIR G 0/1 S and its RWF ISOFIX base
Installed in the rear wards-facing position using its ISOFIX base, which is attached to the rings A
.
The base has a stay. 6 positions of inclination for the shell.
This configuration is reserved for children weighing up to 13 kg.

167
6
Safety

















Locations for ISOFIX child seats
mountings.
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter between Aand G
, is indicated on the child seat next to the ISOFIX logo.
Weight of the child
/ indicative age
Less than 10 kg (group 0)Up to approx. 6 months
Less than 10 kg(group 0)
Less than13 kg (group 0+)Up to approx. 1 year
From 9 to 18 kg (group 1)From approx. 1 to 3 years
Type of ISOFIX child seatinfant car seat"rear facing""rear facing" "for ward facing"
ISOFIX size categoryFGCDECDABB1
Universal and semi-universal ISOFIX child seats which can be installed on the outer rear seatsXXIL1IL2XIUF
IUF:seat suitable for the installation of an Isofix U
niversal seat, "F
orward facing" secured using the "Top Tether" upper strap.
For advice on securing of the "Top Tether" upper strap, refer to the "ISOFIX mountings" section.IL-:only the child seats indicated can be installed using the ISOFIX mountings.
X:seat not suitable for the installation of an ISOFIX seat of the size category indicated.
If in the way, the head restraint of the vehicle's ISOFIX seat must be removed and stowed safely.

168
Safety
The incorrect installation of a child seat in a vehicle compromises the child's protection inthe event of an accident.
Remember to fasten the seat belts or the child seat harnesses keeping the slackin relation to the child's body to a minimum
,
even for shor t journeys.
For optimum installation of the "for ward facing" child seat, ensure that the back of the child seat is in contact with the back of the vehicle's seat and that the head restraint does not cause any discomfort.
If the head restraint has to be removed,ensure that it is stored or attached securelyto prevent it from being thrown around the vehicle in the event of sharp braking.











Advice on child seats
Installing a booster seat
The chest par t of the seat belt must be
positioned on the child's shoulder without touching the neck.Ensure that the lap part of the seat belt passes correctly over the child's thighs.CITROËN recommends the use of a booster seat which has a back, fitted with a seat beltguide at shoulder level.
As a safety precaution, do not leave: - one or more children alone and unsuper vised in a vehicle, - a child or an animal in a vehicle which is exposed to the sun, with the windowsclosed, - the keys within reach of children insidethe vehicle.To prevent accidental opening of the doors, use the "Child lock".Take care not to open the rear windows bymore than one third.To protect young children from the rays of the sun, fit side blinds on the rear windows.

Children under the age of 10 must not travel in the "forward facing" position on the frontpassenger seat, unless the rear seats are already occupied by other children, cannot be used or are absent.
Deactivate the passenger's airbag when a
"rear facing" child seat is installed on thefront seat. Other wise, the child would risk being seriously injured or killed if the airbag were to inflate.

174
Practical information























Changing a wheel
The tools are stored in the boot under the floor.
To gain access to them: )Open the boot.)Lift and remove the boot floor. )Ta k e out the tools.
Access to the tools

List of tools

All of these tools are specific to your vehicle. Do not use them for anything else.1.Wheelbrace.
Used to remove the wheel trim and the
wheel fixing bolts.
2. Jack.
Used to raise the vehicle.
3. Handle.
Used to operate the jack. 4.Removable towing eye.
See "Recovering the vehicle".
5
.Security wheel bolt socket (available as an
accessory).
Used to adapt the wheelbrace to thespecial "security" wheel bolts. Procedure for replacin
g a faulty wheel with the spare wheel using the tools supplied with the vehicle.

Wheel with trim
When removing the wheel , remove the trim first using the handle 3
, pulling atthe cutout.When refitting the wheel
, refit the trim starting by placing its cutout opposite the valve and press on its outer edgewith the palm of your hand.

176
Practical information
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not block traffic: if possible, park the vehicle on level, stable and non-slippery ground.
Apply the parking brake, switch off theignition and engage first gear to lock the wheels.If necessary, place a chock under the wheel diagonally opposite the wheel tobe changed. Never go underneath a vehicle raisedusing a jack; use a stand.


List of operations
)If your vehicle is equipped with security
wheel bolts (equipment available as an accessory) fit the security socket 5on the
wheelbrace 1to slacken the security bolt. )Slacken the other bolts using the
wheelbrace 1only.

178
Practical information
Fitting a wheel
After changing a wheel
When using the "space-saver" spare wheel, do not exceed a speed of 50 mph (80 km/h).Have the tightening of the bolts and the
pressure of the spare wheel checked by a CITROËN dealer or a qualified workshop without delay. Have the punctured wheel repaired andreplace it on the vehicle as soon aspossible.


List of operations
)Put the wheel in place on the hub. )Screw in the bolts fully by hand.)Pre-tighten the security bolt using the
wheelbrace 1fitted with the security socket 5
(if your vehicle is equipped with
security wheel bolts). )Pre-tighten the other bolts using the
wheelbrace 1only.
Fitting snow tyres
If you equip your vehicle with snow tyres fitted on steel wheel rims, specialbolts available from your CITROËN dealer or a qualified workshop must be used.

179
7
Practical information
Lower the vehicle fully.)Fold the jack 2 and detach it. )
Tighten the security bolt using the
wheelbrace 1 fitted with the securitysocket 5(if your vehicle is equipped withsecurity wheel bolts).)
Tighten the other bolts using the
wh
eelbrace 1 only.)
Store the tools (refer to the paragraph"Access to the tools").