2010 YAMAHA RHINO 700 seats

EVU00050
1 -CONTENTS
LOCATION OF THE WARNING AND
SPECIFICATION LABELS ....................... 1-1
SAFETY INFORMATION ......................... 2-1
DESCRIPTION ........................................ 3-1
INSTRUMENT AND CONTROL
FUNCTIONS ............................................ 4-1
Main switch........................................... 4-1
Indicator and warning lights.................. 4-5
Electric Power Steering warning light
“EPS”................................................ 4-19
Multi-function meter unit ..................... 4-23
Light switch......................................... 4-37
On-Command drive knob ................... 4-39
Accelerator pedal ............................... 4-41
Brake pedal ........................................ 4-41
Parking brake lever ............................ 4-43
Drive select lever ................................ 4-45
Fuel tank cap ...................................... 4-45
Doors .................................................. 4-47
Front seats ......................................... 4-49
Rear seat ............................................ 4-55
1234
Seat belts ........................................... 4-71
Glove compartment............................ 4-73
Storage compartment ........................ 4-73
Cup holders........................................ 4-75
Cargo bed .......................................... 4-77
Front and rear shock absorber
assemblies ....................................... 4-83
Trailer hitch bracket and receiver....... 4-85
Auxiliary DC jack ................................ 4-85
FOR YOUR SAFETY –
PRE-OPERATION CHECKS ................... 5-1
Front and rear brakes .......................... 5-7
Fuel .................................................... 5-11
Engine oil ........................................... 5-19
Coolant............................................... 5-21
Front differential gear oil .................... 5-23
Rear differential gear oil ..................... 5-23
Accelerator pedal ............................... 5-25
Seat belts ........................................... 5-25
Steering.............................................. 5-27
Fittings and fasteners......................... 5-27
Instruments, lights and switches ........ 5-27
Control cables .................................... 5-27
5
EE.book Page 1 Monday, January 19, 2009 5:30 PM

4-49 1. Driver seat 2. Front passenger seat
1. Siège du conducteur 2. Siège du passager avant
1. Asiento del conductor 2. Plaza delantera del pasajero
1 2
1. Seat lock release 2. Lock release tab
3. Seat lock lever
1. Dispositif de déblocage du siège
2. Patte de dégagement du dispositif de déblocage
3. Manette de verrouillage de siège
1. Fijación del asiento 2. Maneta de bloqueo
3. Maneta de bloqueo del asiento
1 2
3
a
EVU00330
Front seats
The front seat positions can be adjusted using the
seat lock lever and the seat lock release located at
the rear bottom of each front seat.
Adjust the position of a front seat as follows:
1. While pushing the lock release tab of the lock
release, slide the lock release in direction a.
EE.book Page 49 Monday, January 19, 2009 5:30 PM

4-53 1. Seat mount (× 2)
2. Positioning pin (× 3 each side) 3. Slot
1. Support de siège (× 2)
2. Goupille de position (× 3 de chaque côté)3. Fente
1. Apoyo del asiento (× 2)
2. Pasador de posicionamiento (× 3 a cada lado) 3. Ranura
1
2
2
33
1. Seat lock release 2. Lock release tab
1. Dispositif de déblocage du siège
2. Patte de dégagement du dispositif de déblocage
1. Fijación del asiento 2. Maneta de bloqueo
1 2
b
3. Align the slot in the seat mounts with the
same positioning pin on both seat rails, then
push down on the seat.
4. While pushing the lock release tab of the lock
release, slide the lock release in direction b.
Make sure the seats are securely latched. Al-
so, make sure the lock release is locked in
place. WARNING! A loose seat could
cause the operator to lose control, or
cause the operator or passenger to fall.
EE.book Page 53 Monday, January 19, 2009 5:30 PM

7-9
Passenger requirements
This vehicle is designed for the operator and up to
three passengers. Allowing passengers to ride im-
properly can lead to serious injury or death. As the
operator, you are responsible for your passengers.

Your passengers must be able to place both
feet on the floorboard while seated upright with
their backs against the backrests.


Your passengers must be able to reach and
hold the handholds.


Allow no more than three passengers in the ve-
hicle and only in the designated passenger
seats. Do not carry passengers in the cargo
bed.


Do not allow someone to ride as a passenger
who has been using drugs or alcohol.


Do not allow children who need child safety
seats or booster seats in the Rhino. The seat
belts are not designed to restrain automotive
child safety seats.
EE.book Page 9 Monday, January 19, 2009 5:30 PM

9-5
4. Once the majority of the dirt has been hosed
off, wash all surfaces with warm water and
mild, detergent-type soap. An old toothbrush
or bottle brush is handy for hard-to-get-at
places.
5. Rinse the vehicle off immediately with clean
water and dry all surfaces with a clean cham-
ois towel or soft, absorbent cloth.
6. Clean the seats with a vinyl upholstery clean-
er to keep the covers pliable and glossy.
7. Automotive-type wax may be applied to all
painted and chrome-plated surfaces. Avoid
combination cleaner-waxes. Many contain
abrasives which may scratch the paint or pro-
tective finish. When finished, start the engine
and let it idle for several minutes.
EE.book Page 5 Monday, January 19, 2009 5:30 PM