2010 YAMAHA BANSHEE 350 ECU

[x] Cancel search: ECU

Page 1 of 146

YAMAHA BANSHEE 350 2010  Owners Manual   
This A
MANUAL DEL PROPIETARIO
3B5-28199-64
YFZ350Z
MANUEL DU PROPRIÉTAIREOWNER’S MANUALREAD THIS MANUAL CAREFULLY!
It contains important safety information.LIRE ATTENTIVEMENT CE MANUEL!
Il compr

Page 22 of 146

YAMAHA BANSHEE 350 2010  Owners Manual  
2-3 
12
3
4
5
6
7
8
9
10
11
 
speed when climbing a hill. If you stall or roll
backwards, follow the special procedure for
braking described in this manual. Dismount on
the uphill side or to a side

Page 34 of 146

YAMAHA BANSHEE 350 2010  Owners Manual  
4-9 
1
2
34
5
6
7
8
9
10
11
 
3. Wipe up any spilled fuel immediately. 
NOTICE: 
 Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since fuel may
deteriorate painted surfaces or plas

Page 37 of 146

YAMAHA BANSHEE 350 2010  Owners Manual  
4-12 
1
2
34
5
6
7
8
9
10
11
 
To install the seat 
Insert the projection on the front of the seat into the
seat holder and push down on the seat at the rear.
Make sure that the seat is securely fit

Page 56 of 146

YAMAHA BANSHEE 350 2010  Owners Manual  
6-7 
1
2
3
4
56
7
8
9
10
11
 
been designed, tested, and approved by Yamaha
for use on your ATV. Many companies with no con-
nection to Yamaha manufacture parts and acces-
sories or offer other modi

Page 57 of 146

YAMAHA BANSHEE 350 2010  Owners Manual  
6-8 
1
2
3
4
56
7
8
9
10
11
 
tance for braking. 
As originally equipped, this ATV is not designed to
carry cargo or tow a trailer. If you choose to add ac-
cessories so that you can carry cargo or

Page 99 of 146

YAMAHA BANSHEE 350 2010  Owners Manual  
8-21 
1
2
3
4
5
6
78
9
10
11
 
11. Insert the air filter element into the air filter
case, and then install the air filter case cover
by hooking the holders onto the air filter case. 
NOTICE: 
 Make

Page 104 of 146

YAMAHA BANSHEE 350 2010  Owners Manual  
8-26 
1
2
3
4
5
6
78
9
10
11
 
6. Remove the fuel tank by removing the bolts.
7. Remove the air filter case cover by unhooking
the holders.8. Remove the mixing chamber cap securing
plate by removing
Page:   1-8 9-16 next >