2010 TOYOTA VENZA Accessories, Audio & Navigation (in English)

8
DESTINATION INPUT - POINT OF INTEREST (POI)
POINT OF INTEREST BY CATEGORY
Touch .
Touch the desired category
location.Touch the desired category icon
followed by the desired
sub-category.
Use
or to scroll up or
down. Touch the desired point of
interest.
step1step2
step3step4
step5Touch . See page 15 to
select desired Route Preference.
Touch
to start route
guidance.
step6
Press the DEST panel button
followed by
.
413619M2.indd 810/5/09 9:08:13 AM

9
DESTINATION INPUT - POINT OF INTEREST (POI)
POINT OF INTEREST BY CATEGORY - VOICE RECOGNITION
Press on the steering wheel.
After the beep say, “Destination.”After the beep say, “Point of
Interest.”
After the beep say, “Near Here.” After the beep say, “Hotels.” See
page 22 for the list of recognized
POI categories in addition to those
displayed on the screen.
After the beep say the number
that corresponds to the desired
destination. step1step2
step3step4
step5
After the beep say, “Enter”
to confi rm destination. Touch
to start route guidance.
step6
Quick Tip - If you know your next command,
you can press
at any time to interrupt the
prompt. Speak your command after the beep.
413619M2.indd 910/5/09 9:08:17 AM

10
SET HOME
Touch .
Make sure you are in the
desired Search Area. Touch
.
Input the city name and touch .
step2
step3
step5step6
Press the SETUP panel button
followed by
.step1
Touch . Touch . step4 Tip - For security reasons, use a point close
to your home instead of your actual home
address.
413619M2.indd 1010/5/09 9:08:20 AM

11
SET HOME
Input the street name and touch .
Touch followed
by
to change the
home icon.
Touch the desired icon for
your home. Touch

at the bottom right of the Edit
Home screen.
step8
step9
step11step12
Touch the desired city name. step7
Touch the desired street name. Input the house number and
touch . step10
Quick Tip - Enter the street name without
prefi xes such as North or the letter N. The
system will display the base street name
without prefi xes or suffi xes on the next screen.
413619M2.indd 1110/5/09 9:08:23 AM

12
CONNECT A BLUETOOTH PHONE
Touch . Verify that
Bluetooth feature on the phone is
ON and is in discoverable mode. step2
step3
Press the INFOPHONE panel button
followed by
.step1
Input the passkey listed on the
screen into the approved Bluetooth
cell phone. Please refer to the cell
phone manufacturer’s user guide
for pairing procedures. Upon connection, the system will
indicate that the pairing process
was successful.step4
Quick Tip - Verify the Bluetooth cell phone has
been approved by visiting www.Toyota.Letstalk.com.
Quick Tip - Up to 4 Bluetooth cell phones can
be paired. However, only one Bluetooth cell
phone can be used at a time.
If you have diffi culty pairing your phone, or are unable to transfer your cell phone book, please
refer to the cell phone manufacturer's user guide, or go to www.Toyota.Letstalk.com for more
information about phone connections and compatibility. If you are able to successfully transfer
your phone book, you can dial by name using voice recognition. Please say the name exactly
as it is entered in your phone when in the telephone screen.
413619M2.indd 1210/5/09 9:08:27 AM

13
CALLING BY VOICE RECOGNITION
After the beep say, “Dial by
Number.”
Call is active when
is indicated. To end call, press
on the screen or
on the steering wheel.
step2
step3
step5
Press on the steering wheel.
After the beep say, “Phone.”step1
After the beep say the phone
number digits individually, without
pausing (e.g. “Three, one, zero,
four…”).After the beep, say “Dial” or
press
on the steering
wheel. step4
Quick Tip - A noisy environment may prevent
the voice recognition system from understanding
your commands. It is recommended that you
reduce background noise (including passenger
conversation and wind noise) prior to using the
Voice Recognition system.
Quick Tip - If you know your next command,
you can press
at any time to interrupt the
prompt. Speak your command after the beep.
Some Bluetooth® equipped
cell phones may or may not show battery or signal
strength on the display. DIAL BY NUMBER
413619M2.indd 1310/5/09 9:08:30 AM

14
CALLING BY VOICE RECOGNITION
DIAL BY NAME
Press on the steering wheel.
After the beep say, “Phone.”step1
Quick Tip - If you know your next command,
you can press
at any time to interrupt the
prompt. Speak your command after the beep.
After the beep say, “Dial by
Name.”step2
step3
After the beep say the name from
the contact list. If there is more
than one phone number for the
contact, follow the prompt.After the beep, say “Dial” or
press
on the steering
wheel. step4
Call is active when
is indicated. To end call, press
on the screen or
on the steering wheel.
step5
If you have diffi culty pairing your phone, or are unable to transfer your cell phone book, please
refer to the cell phone manufacturer's user guide, or go to www.Toyota.Letstalk.com for more
information about phone connections and compatibility. If you are able to successfully transfer
your phone book, you can dial by name using voice recognition. Please say the name exactly
as it is entered in your phone when in the telephone screen.
413619M2.indd 1410/5/09 9:08:34 AM

15
ADDITIONAL NAVIGATION FEATURES
Once the address has been inputted, select the
desired route preference(s) for the trip. When
the yellow bar appears, the preference has been
selected. For example, if Toll Roads is not selected,
the system will route over non-toll roads which
may take longer to reach the destination. ROUTE PREFERENCES
Touch to select from seven different
screen viewing options. Four screen preferences
are available when the map is visible and three
additional are available during route guidance only.
3 ROUTES
SCREEN PREFERENCES
One of three routes may be chosen for the trip.
Quick offers the shortest route by time; Alt is the
second fastest route; Short is the most direct based
upon driven mileage. The system does not account
for traffi c signals or traffi c fl ow.
Single Map SEARCH AREASinggle Map
* Selections available
when in guidance
mode only. Dual Map
Compass
Freeway
Information* Turn List
* Arrow
* Intersection
Guidance
Prior to inputting the desired address select the
Search Area by pressing . If the
incorrect Search Area is chosen, the system will
either fi nd an address that closely matches in that
area or will indicate that the address cannot be
found.Select the desired Search Area and touch .
413619M2.indd 1510/5/09 9:08:37 AM