2010 TOYOTA tC Accessories, Audio & Navigation (in English)

DESTINATION SEARCH
56
V573_E

4. Touch the touch screen button of
the desired destination.
The screen changes and displays the
map location of the selected destination
and the route preference. (See “Starting
route guidance” on page 61.)
INFORMATION
The navigation system does not
guide in areas where route guidance
is unavailable. (See page 271.)
1. Push the “DEST” button.
2. Touch “Memory” on the “Destina-
tion” screen.
To displays your list of registered mem-
ory points. (To register or edit memory
points, see “My Places” on page 96.)

3. Touch the touch screen button of
the desired memory point.
The screen changes and displays the
map location of the selected destination
and the route preference. (See “Start-
ing route guidance” on page 61.)

— Destination search by
“Memor
y”

DESTINATION SEARCH

57
V573_E

1. Push the “DEST” button.
2. Touch “Previous” on the “Desti-
nation” screen.

The previous starting point and up to 100
previously set destinations are displayed
on the screen.
3. Touch the touch screen button of
the desired destination.
The screen changes and displays the
map location of the selected destination
and the route preference. (See “Start-
ing route guidance” on page 61.)

INFORMATION
The list of previous destinations can
be deleted. (See “ — Deleting pre-
vious points” on page 108.)

1. Push the “DEST” button.
2. Touch “Map” on the second page
of the “Destination” screen.

The screen changes and displays the
map location that was previously dis-
played just before the destination input
operation and the route preference.
(See “Starting route guidance” on page
61.)

— Destination search by
“Previous”
— Destination search by
“Ma
p”

DESTINATION SEARCH
58
V573_E
1. Push the “DEST” button.
2. Touch “Intersection” on the sec-
ond page of the “Destination” screen.

3. Input the name of the two inter-
secting streets which are located near
the destination to be set.

4. Touch the touch screen button of
the desired item.
After inputting the two intersecting
streets, the screen changes and displays
the map location of the selected destina-
tion and the route preference. (See
“Starting route guidance” on page 61.)

If the same two streets cross at more
than one intersection, the screen
changes and displays the menu to select
the city name where the streets intersect.
Select the city, and the map location of
the selected destination and the route
preference. (See “Starting route guid-
ance” on page 61.)

— Destination search by
“Intersection”

DESTINATION SEARCH

59
V573_E

1. Push the “DEST” button.
2. Touch “Freeway Ent./Exit” on the
second page of the “Destination”
screen.

Be sure to use the complete name of the
freeway or highway, including the hy-
phen, when entering the destination.
Freeways and interstates use an “I” (i.e.,
I− 405). US Highways use the state des-
ignation before the number (i.e.,
CA −118).

3. Select the desired freeway by
touching the touch screen button.

4. Either a freeway “Entrance” or
“Exit” can be selected.

5. Touch the touch screen button of
the desired entrance or exit name.
The screen changes and displays the
map location of the selected destination
and the route preference. (See “Starting
route guidance” on page 61.)
“Input Name”: An applicable list is dis-
played by touching this touch screen
button and inputting the name.


— Destination search b
y
“Freeway Ent./Exit”

DESTINATION SEARCH
60
V573_E
1. Push the “DEST” button.
2. Touch “Coordinates” on the sec-
ond page of the “Destination” screen.

3. Input the latitude and the longi-
tude.
4. When the input is finished, touch
“OK”.
By touching the touch screen button of
the desired point, the screen changes
and displays the map location of the se-
lected destination and the route prefer-
ence. (See “Starting route guidance” on
page 61.) 1. Push the “DEST” button.
2. Touch “Phone #” on the second
page of the “Destination” screen.

3. Input a telephone number.
4. After inputting a telephone num-
ber, touch “OK”.
The screen changes and displays the
map location of the selected destination
and the route preference. (See “Start-
ing route guidance” on page 61.)
If there is more than one site having the
same number, the following screen will
be displayed.


INFORMATION
To set a memory point as a destina-
tion using the phone number, the
number must be registered previ-
ously. (See page 102.)


— Destination search by
“Coordinates”

— Destination search by
“Phone #”

DESTINATION SEARCH

61
V573_E

After inputting the destination, the screen
changes and displays the map location
of the selected destination and the route
preference.

1. When an arrow facing the desired
point is touched, the map scrolls in
that direction.
Releasing the finger from the arrow will
stop the scrolling.
2. Touch “Enter”.
The system starts route search and dis-
plays recommended routes.
If there is already a set destination, “Add
to
” and “Replace ” are dis-
played.
“Add to
”: To add a destination.
“Replace
”: To delete the existing
destinations and set a new one.
“Route Preference”: To change the
route preference. (See page 62.)
“Info.”: If this touch screen button is
displayed on the top of the screen, touch
it to view items such as name, address,
and phone number.

Current position
Destination point
Type of the route and the dis- tance
Distance of the entire route
3. To start guidance, touch “Guide”.
“3 Routes”: To select the desired route
from three possible routes. (See page
63.)
“Route”: To change the route. (See
pages 72 and 75.)


Startin
g route guidance

DESTINATION SEARCH
62
V573_E

INFORMATION
z Guidance can be suspended or
resumed. (See “Suspending and
resuming guidance” on page 86.)
z If “Guide” is touched until a beep
sounds, demo mode will start.
Push the “MAP” button to finish
demo mode.
z The route for returning may not
be the same as that for going.
z The route guidance to the desti-
nation may not be the shortest
route nor a route without traffic
congestion.
z Route guidance may not be avail-
able if there is no road data for
the specified location.
z When setting the destination on a
map with a scale larger than 0.5
miles (800 m), the map scale
changes to 0.5 miles (800 m)
automatically. Set the destina-
tion again.
z If a destination is entered, the
road nearest to the point you se-
lected is set as the destination.

CAUTION
Be sure to obey traffic regulations
and keep road conditions in mind
while driving. If a traffic sign on
the road has been changed, the
route guidance may provide wrong
information.

z To change the route before start-
ing guidance
ROUTE PREFERENCE

1. You can change route preference
by touching “Route Preference”.

2. Select the desired route prefer-
ence by touching the touch screen
button.
When searching for a route, the system
will avoid routes when the indicator is off.
3. After choosing the desired route
preference, touch “OK”.

INFORMATION
z Even if the “Allow Freeway” indi-
cator is dimmed, the route cannot
avoid including a freeway in
some cases.
z If the calculated route includes a
trip by ferry, the route guidance
shows a sea route. After you
travel by ferry, the current vehicle
position may be incorrect. Upon
reception of GPS signals, it is
automatically corrected.

DESTINATION SEARCH

63
V573_E

3 ROUTES SELECTION

1. To select the desired route from
three routes, touch “3 Routes”.

2. Touch “Quick1”, “Quick2” or
“Short” to select the desired route.
“Quick1”: Recommended route.
This route is indicated by an orange line.
“Quick2”: Alternative route.
This route is indicated by a purple line.
“Short”: A route by which you can reach
the destination in the shortest distance.
This route is indicated by a green line.
“Info.”: To display the following informa-
tion about each of the 3 routes.

Time necessary for the entire trip
Distance of the entire trip
Toll road
Freeway
Ferry