2010 SUZUKI KIZASHI bluetooth

5-14
OTHER CONTROLS AND EQUIPMENT
57L20-03E
Part 15 of the FCC Rules
FCC Warning:
Any unauthorized changes or modifica-
tions to this equipment would void the
user’s authority to operate this device.Bluetooth
®: Bluetooth
® is a registered
trademark of Bluetooth SIG, Ink.
Stop using this unit and a Bluetooth
®-
ready device whenever requested.
This unit shares the communication fre-
quency with other private or public wire-
less communication equipment such as a
wireless LAN and other wireless commu-
nication radios.
You should stop using this unit whenever
you are notified that your unit disturbs
other wireless communication immedi-
ately.
WARNING
Laser product
This product is a class I laser prod-
uct.
Use of controls or adjustments or
performance of procedures other
than those specified herein may
result in hazardous radiation expo-
sure.
Do not open covers and do not
repair by yourself. Refer servicing to
qualified personnel.
WARNING
Keep away from the medical
devices.
This unit and mobile phones can
interfere with the functioning of
medical devices such as hearing
aids or pacemakers.
Failure to observe this may arise the
malfunction of medical devices
resulting in personal injury or death.
WA R N I N G
This equipment complies with FCC
radiation exposure limits set forth
for uncontrolled equipment and
meets the FCC radio frequency (RF)
Exposure Guidelines in Supple-
ment C to OET 65. This equipment
has very low levels of RF energy
that it deemed to comply without
maximum permissive exposure
evaluation (MPE). But it is desirable
that it should be installed and oper-
ated with at least 20cm and more
between the radiator and person’s
body (excluding extremities: hands,
wrists, feet and ankles).

5-25OTHER CONTROLS AND EQUIPMENT
57L20-03E
 CDs or CD-ROMs carrying no mark (A)
cannot be used.
 Some discs previously recorded in CD-
R\CD-RW format may not be used.
 A CD is inserted with its label facing
upward.
 When there is a CD already loaded in
the unit, another CD cannot be loaded
at the same time. Do not use force when
inserting the CD into the CD insertion
slot.
 If a blank disc (non recorded CD-R) is
loaded in the unit, the disc will be
ejected.Selecting a CD mode
Press the CD button (3).
Each time the button is pressed, the
source is switched as follows:
Loading a CD
Insert a CD in the Insertion slot (1).
When a CD is loaded, play starts.Ejecting a CD
Press the Eject button (2).
If you left a CD ejected for a period of
about 15 seconds, it will be automatically
drawn inside the unit. (Auto reload func-
tion, only at ACC off)
The backup eject function:
This function allows you to eject a CD with
the ACC power turned off by pressing the
Eject button (2).
Listening to a CD
When a CD is inserted, it is automatically
played back.
When a CD is already inside the unit,
press the CD button (3) to play back the
CD.
(A)
CAUTION
 Never insert your finger or hand
into the CD insertion slot. Never
insert foreign objects.
 Never insert a CD with glue coming
out from adhesive tape or a rental
CD label or with a trace indicating
that adhesive tape or a rental CD
label has been removed. This may
cause the CD not to eject or result
in a malfunction.
CD Bluetooth
® audio
CAUTION
If you forcefully try to push an ejected
CD inside the unit before auto reload-
ing, the disc surface might be
scratched.
Eject completely before reloading.

5-38
OTHER CONTROLS AND EQUIPMENT
57L20-03E
Bluetooth
® Hands-Free (if equipped)
(1) TUNE FOLDER PUSH SOUND knob
(2) VOL PUSH POWER knob
(3) Preset buttons
(4) DISP button
(5) RDM button
TUNE / FOLDER / CHDISPAS
RPT
XM
USBMENU
RDM
SEEK/ TRACK/CAT
SOUNDPUSH
1
2
3
4
5
6
VOL PUSH POWER
CD
FM/ AMH
M
(4) (1)
(3) (2)(5)
Hands-free switches
(6) Talk button
(7) Off Hook button
(8) On Hook button
(9) VOL switch
(6)(7)
(8)(9)

5-39OTHER CONTROLS AND EQUIPMENT
57L20-03E
Bluetooth
® language selection
The language used for the voice guidance,
menu, and voice recognition can be
selected. (Default: English)
1) Press the Off Hook button (7).
The hands-free mode is activated.
2) Hold down RDM button (5) for 2 sec. or
more.
3) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select a language,
and press the TUNE FOLDER PUSH
SOUND knob (1) to determine the
selection.
NOTE:
The regular screen resumes if no opera-
tion is performed for 5 sec. or more. Telephone registration
NOTE:
 Up to 6 telephones can be registered.
 To set up a new phone, disconnect the
system from the audio player. The audio
player shall be reconnected after phone
setup is completed.
 If connection cannot be confirmed within
120 seconds, the connecting operation
is canceled. Please try again or refer to
the Phone's manual for assistance with
the pairing process.
1) Press the Off Hook button (7).
The Bluetooth
® main menu appears.
2) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Pair
Phone”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Record
Name”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
4) Pronounce the name to be used at
voice recognition. 5) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Confirm”,
and press the TUNE FOLDER PUSH
SOUND knob (1) to determine the
selection.
6) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Phone
Only” or “Int. Audio”, and press the
TUNE FOLDER PUSH SOUND knob
(1) to determine the selection.
“Phone Only” shall be selected for
using only as the telephone, and
“Int.Audio” shall be selected for using
as the built-in audio equipment as well
as the telephone.
7) Select “CAR_M.MEDIA” from the
Bluetooth
® menu of the cell phone and
make a connection.
Refer to the manual of your cell phone
for further information.
8) Enter the Passkey displayed on the
system into the cell phone.
9) Press the On Hook button (8).
NOTE:
 Selection of “Go Back” displays the pre-
vious menu.
 If you select “Pair Phone” at step 8, you
can register the other phones continu-
ously.
To activate the hands-free function with
this unit, your cell phone needs to be
registered.

5-40
OTHER CONTROLS AND EQUIPMENT
57L20-03E
Receiving a call
Press the Off Hook button (7) to receive a
call.
Ending a call
Press the On Hook button (8) to end a call.
Rejecting a call (only for supported-
models)
Press the On Hook button (8) to reject a
incoming call.Adjusting the listening volume
 Turn the VOL PUSH POWER knob (2)
during a call.
Turning it clockwise increases the vol-
ume; turning it counterclockwise
decreases the volume.
 Lean the VOL switch (9) during a call.
Leaning to the upper side increases the
volume; leaning the lower side
decreases the volume.
Adjusting the ring volume
 Turn the VOL PUSH POWER knob (2)
while a call coming in.
Turning it clockwise increases the vol-
ume; turning it counterclockwise
decreases the volume.
 Lean the VOL switch (9) while a call
coming in.
Leaning to the upper side increases the
volume; leaning the lower side
decreases the volume.Dialing by using Redial/Callback
The last dialed number is dialed.
NOTE:
Up to latest 5 calls can be stored for each.
1) Press the Off Hook button (7).
The Bluetooth
® main menu appears.
2) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Redial” or
“Callback”, and press the TUNE
FOLDER PUSH SOUND knob (1) to
determine the selection.
For calling from the outgoing call
record or incoming call record, “Redial”
or “Callback” shall be selected, respec-
tively.
3) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select a number,
and press the TUNE FOLDER PUSH
SOUND knob (1) to determine the
selection.
4) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Dial”, and
press the TUNE FOLDER PUSH
SOUND knob (1) to determine the
selection.
The selected number is dialed.
NOTE:
 Selection of “Go Back” displays the pre-
vious menu.
 Pressing the Off Hook button (7) in the
2nd step allows users to forward to the
3rd step with a single motion.

5-41OTHER CONTROLS AND EQUIPMENT
57L20-03E
 Pressing “Confirm” after selecting
“Store” allows the selected number to be
registered to the Phonebook.
 Pressing “Confirm” after selecting
“Delete” allows the selected number to
be deleted from the list.Registration in Phonebook
A telephone number is registered to the
Phonebook.
1) Press the Off Hook button (7).
The Bluetooth
® main menu appears.
2) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Phone-
book”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Add Entry”,
and press the TUNE FOLDER PUSH
SOUND knob (1) to determine the
selection.
4) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “By Voice”,
“By Phone”, “Manual Input” or “Call
History”, and press the TUNE
FOLDER PUSH SOUND knob (1) to
determine the selection.
"By Voice": Registers through the
voice command.
"By Phone": Registers through the
telephone.
"Manual Input": Registers with use of
the TUNE FOLDER PUSH SOUND
knob (1).
"Call History": Registers through the
incoming/outgoing call records.5) Press the Talk button (6) and pro-
nounce a registered name.
6) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Confirm”,
and press the TUNE FOLDER PUSH
SOUND knob (1) to determine the
selection.
NOTE:
 Selection of “Go Back” displays the pre-
vious menu.
 Up to 20 numbers can be registered in
Phonebook.

5-42
OTHER CONTROLS AND EQUIPMENT
57L20-03E
Name change (Change Name)The name of number registered in phonebook
is changed.
1) Press the Off Hook button (7).
The
Bluetooth
® main menu appears.
2) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select “Phonebook”, and
press the TUNE FOLDER PUSH SOUND
knob (1) to determine the selection.
3) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select “Change Name”, and
press the TUNE FOLDER PUSH SOUND
knob (1) to determine the selection.
4) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select a number to be
changed, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine the
selection.
5) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select “Record Name”, and
press the TUNE FOLDER PUSH SOUND
knob (1) to determine the selection.
6) Pronounce the name to be used at voice
recognition.
7) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select “Confirm”, and press
the TUNE FOLDER PUSH SOUND knob
(1) to determine the selection.
NOTE:
Selection of “Go Back” displays the previous
menu.
Making a call by Phonebook
The number registered in Phonebook is
dialed.
1) Press the Off Hook button (7).
The Bluetooth
® main menu appears.
2) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Phone-
book”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “List
Names”, and press the TUNE
FOLDER PUSH SOUND knob (1) to
determine the selection.
The registered numbers are displayed
in sequence.
4) Press the Off Hook button (7).
The displayed number is dialed.Deletion of registered data (Delete
Entry)
The number registered in Phonebook is
deleted.
1) Press the Off Hook button (7).
The Bluetooth
® main menu appears.
2) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Phone-
book”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Delete
Entry”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
4) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select a number to
be deleted, and press the TUNE
FOLDER PUSH SOUND knob (1) to
determine the selection.
5) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Confirm”,
and press the TUNE FOLDER PUSH
SOUND knob (1) to determine the
selection.
NOTE:
Selection of “Go Back” displays the previ-
ous menu.

5-43OTHER CONTROLS AND EQUIPMENT
57L20-03E
One-touch call (Speed dial)
One of the numbers registered to the Pre-
set buttons (3) is dialed.
1) Press the Off Hook button (7).
The hands-free mode is activated.
2) Press one of the Preset buttons (3).
The registered name is pronounced.
When no registered name is found,
“Empty” is pronounced.
3) Press the Off Hook button (7).
The selected number is dialed.Registration in speed dial
A telephone number is registered to the
speed dial.
1) Press the Off Hook button (7).
The Bluetooth
® main menu appears.
2) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Phone-
book”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Speed
Dial”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
4) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select a number to
be registered, and press the TUNE
FOLDER PUSH SOUND knob (1) to
determine the selection.
5) Press one of the Preset buttons (3), to
which the selected number is regis-
tered.
If a number is already registered to the
selected button, a confirmation mes-
sage is displayed. Turn the TUNE
FOLDER PUSH SOUND knob (1) to
select “Confirm”, and press the TUNE
FOLDER PUSH SOUND knob (1) to
determine the selection.
NOTE:
Selection of “Go Back” displays the previ-
ous menu. Deletion of speed dial (Del Spd Dial)
The numbers registered to the speed dial
is deleted.
1) Press the Off Hook button (7).
The Bluetooth
® main menu appears.
2) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Phone-
book”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Del Spd
Dial”, and press the TUNE FOLDER
PUSH SOUND knob (1) to determine
the selection.
4) Press one of the Preset buttons (3), to
which the selected number is regis-
tered.
5) Turn the TUNE FOLDER PUSH
SOUND knob (1) to select “Confirm”,
and press the TUNE FOLDER PUSH
SOUND knob (1) to determine the
selection.
NOTE:
Selection of “Go Back” displays the previ-
ous menu.