Page 250 of 388
5-71OTHER CONTROLS AND EQUIPMENT
57L20-03E
CD
ERROR 1The disc cannot be read.Insert the disc with its label side up.
Check the disc that it is not warped and is free of flaws.
If ERROR 1 does not go out when a normal disc is
inserted, consult your dealer.
ERROR 3The player developed an error of an uni-
dentified cause.If CD is inserted in the unit, press the CD eject button to
remove the disc.
If the disc cannot be ejected, consult your dealer.
USB/iPod
®ERROR 1No operation by some cause.Unplug the USB device and plug it again.
If ERROR 1 does not go out when a normal disc is
inserted, consult your dealer.
ERROR 3The USB device is disconnected. Check the connection of the USB device.
ERROR 4The current consumption of the USB
device exceeds 500 mA.Check the USB device.Display
Possible cause
Possible solution
Page 251 of 388
5-72
OTHER CONTROLS AND EQUIPMENT
57L20-03E
Bluetooth
®ERROR 1The player developed an error of an uni-
dentified cause.Disconnect the Bluetooth
®-ready device and connect it
again.
If ERROR 1 does not go out, consult your dealer.
FailedFailed to establish pairing Try to establish the pairing again.
Memory FullReaching the upper limit of the register-
able device countDelete the registered data of unnecessary devices and
try to establish the pairing again.
Not Avail.Inoperable during driving Operate the system after pulling over your car.
Pardon?Failed voice recognition Press the Talk button and say what you said again.
Not LinkedTelephone disconnected Try to establish the pairing again.
Display
Possible cause
Possible solution
Page 260 of 388

5-81OTHER CONTROLS AND EQUIPMENT
57L20-03E
Universal Serial Bus (USB) Socket
57L51061
Connect your portable digital music player,
etc. to this socket to enjoy music through
the vehicle’s audio system using it as a
source. Refer to “Audio Systems” in the
“OTHER CONTROL AND EQUIPMENT”
section.
Cigarette Lighter (if equipped)
57L51068
The cigarette lighter will work when you
press the engine switch to change the igni-
tion mode to “ACC” or “ON”.
To use the cigarette lighter, push it all the
way into the receptacle and release it. It
will automatically heat up and will pop out
to its normal position when it is ready for
use.
CAUTION
If you close the lid of the lidded
instrument panel box with a device
still connected to the USB socket, the
equipment and the socket may be
damaged.
CAUTION
Holding the cigarette lighter in can
overheat and damage the lighter.
Release the lighter after you push it
in.
CAUTION
To avoid damage to the cigarette
lighter socket, do not use it as an
accessory power source. Some
accessories’ power plug can damage
the inner mechanism of the cigarette
lighter socket.