–
Set the desired value by pressing the button or
.
SKM (SEEK MODE)
● ALL - stops the station finding on all available stations;
● PRESET - stops the station finding on the stored stations.
VOL
Your radio stores the last volume set before switching off. If the value is higher,
the volume is reduced to the value of the parameter ON VOLUME after switching
on the radio again.
GAL (GALA)
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
DIS (DISPLAY)
Set the level of the backlighting for the display.
PHONE
If your vehicle is equipped with a handsfree system, the monophone play function
of the mobile phone calls is carried out via the loudspeakers of the vehicle.
PDC AT
If your vehicle is equipped with
“parking aid”, the volume is automatically de-
creased to a pre-defined value, when the “parking aid” is active.
● PDC AT0 - no volume restriction;
● PDC AT1 - restricts the volume to a middle level;
● PDC AT2 - restricts the volume to a low level;
● PDC AT3 - Mute.
AUX
Setting of the input sensitivity AUX VOL LEVEL:
● AUX VOL LEV 1 - high level, used in particular for notebooks;
● AUX VOL LEV 2 - middle level, used for cassettes or CD player;
● AUX VOL LEV 3 - low level, used for MP3 player;Note
Each setting change is stored by changing to another menu point. ÐRadio mode
Waveband switch-over Your radio is equipped with FM and AM wavebands.
In the ranges FM1/FM2 and AM1/AM2 there are each 6 memory spaces available, in
order to change, press the button
RADIO briefly.
Ð
The process of searching for and storing the radio stations Manual search
–
Search the frequency of the desired radio station by turning the control button
2 .
Automatic station finding
– The radio searches for the next radio station in the selected waveband by
pressing the button or
briefly.
Function SCAN
– The radio stations of the current waveband are briefly played (10 seconds) by
pressing the control button 2 or by pressing the button
MENU and tapping
the function key SCN afterwards.
– This function is ended by pressing the button 2 once again and the current
station is replayed.
Function AS
– Press the button MENU and then the button
AS. An automatic station finding
is started during which the 6 stations with the strongest signal in the memory
level FM1 and/or AM1 are stored. AM1.
Store station
– After selecting the radio station, hold the station key 8 , on which it should be
stored until it briefly switches to mute and a brief signal sounds. Ð
RDS functions Certain radio stations transmit additional text information - designated as radio
text.
4
General information
Note
● The text information must not be available to all radio stations.
● Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters. Ð
Traffic information function Activating and deactivating the traffic reports
Press the button
TP ,
TP appears in the display. If a set radio station does not
transmit a traffic report, NO TP appears on the display, and the radio searches for
a station which transmits the traffic report. TP SEEK is displayed on the display.
If no radio station which transmits the traffic reports is found, NO TP is shown on
the display.
An incoming traffic report will automatically interrupt CD playback. INFO and Sta-
tion name is shown on the display. At the end of the traffic report, the radio auto-
matically returns to the original play function.
If you wish to deactivate the traffic information, press once again the button TP ,
TP goes out on the display. Ð 5
General information
