Page 25 of 244

Instruments and warning lights
24Shown in the menu
Vehicle status
, if there is at least one error message. After selecting
this menu the first of the error messages is displayed. Several error messages are shown on the display under the message e.g.
1/3
. This indicates that the first of a total
of three error messages is displayed. The respective messages are displayed one after the other in an interval of 5 seconds. Chec
k as soon as possible the displayed error
messages. As long as the operational faults are not
rectified, the symbols are always indicated
again. After the first display, the symbol
s are indicated without information for the
driver. If a fault occurs, a warning signal will also
sound in addition to the symbol and text in
the display:
Priority 1 - three warning signals
Priority 2 - one warning signal
Red symbols A red symbol signals danger.– Bring the vehicle to a stop. – Switch the engine off.– Investigate the function indicated.– Obtain professional assistance. Meaning of the red symbols: Three
successive warning signals will sound if a red symbol appears.
Yellow symbols A yellow symbol signals a warning.Check the relevant function as soon as possible. The meaning of the yellow symbols: One
warning signal will sound if a yellow symbol appears.
If several operational faults of priority 2
exist, the symbols appear one after the other
and are each illuminated for about 5 seconds.SetupYou can change certain settings by means
of the information display. The current
setting is shown on the information display
in the respective menu at the top below the
line. You can select the following information (d
epending on the equipment installed on
the vehicle):
Language
MFD Data (MFA DATA)
Time
Winter tyres
Units
Alt. speed dis.
Service Interval (Service)
Factory Setting
Back
After selecting the menu point
Back
you will reach one level higher in the menu.
Engine oil pressure too low
page 29
Overheated clutches of the automatic gear- box DSG*
page 98
Check engine oil level, engine oil sensor faulty
page 29
s3j8.a.book Page 24 Tuesday, April 20, 2010 1:10 PM
Page 26 of 244

Instruments and warning lights
25
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
Language Here you can set in which language the
warning and information texts should be
displayed. Displays of the MFA Here you can switch off or on certain di
splays of the multi-
functional indicator.
Time Here you can set the time, the time format (12 or 24 hour indicator) and the time change summer/winter time. Winter tyres Here you can set at which speed a warning si
gnal should sound. This function is used
for e.g winter tyres with the permissibl
e maximum speed less than the maximum
speed of the vehicle. When exceeding the speed, the following is
displayed on the information display*:
Winter tyres max. speed ... km/h (Winter tyres maximum ... km/h)
Measures Here you can set the units for temperat
ure, consumption and distance driven.
Second speed Here you can switch on the display of
the second speed in mph or in km/h
2).
Service Here you can have the kilometers still to
be driven and the days until the following
service interval shown and the Service Interval Display reset. Factory Setting After selecting the menu point
Factory Setting
the factory setting of the information
display is established again.2)Valid for countries where the values are indicated in British measuring units.
s3j8.a.book Page 25 Tuesday, April 20, 2010 1:10 PM
Page 110 of 244

Communication
109
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
The buttons operate the functions for the operating mode of the current telephone.Operate the telephone via the information display*The display of texts in the menu
Phone
is possible in the following languages:
Czech, English, German, French, Italia
n, Spanish, Russian and Portuguese.
In the menu
Phone
you can select the following menu points:
Phone book
Dial number
Call register
Voice mailbox
Bluetooth
Settings
Back
Phone book In the menu point
Phone book
is the list of the loaded contacts from the telephone
memory and the SIM card of the mobile phone. In the phone phonebook there are 2 500 free memory locations available. Dial number In the menu point
Dial number
, you can write any telephone number. Select in
sequence the desired digits with the aid of
the handwheel and confirm it by pressing
the handwheel. You can select the numbers
0 - 9
, the symbols
+, , # and the func-
tions
Delete, Call, Cancel
.
Call register In the menu point
Call register
, you can select the following menu points:
Missed calls
Received calls
Last calls
Voice mailbox In the menu
Voice mailbox
, it is possible to set the number of the voice mailbox and
then dial the number. Bluetooth In the menu
Bluetooth
you can select the following menu points:
User
- the overview of the stored users
New user
- Search for new telephones which are in the reception range
Visibility
- Switching on the visibility of
the telephone unit for other devices
Media player
Active device
Paired devices
Search
Phone name
- the possibility to change the name of the telephone unit (pre-set
SKODA UHV) Settings In the menu
Settings
you can select the following menu points:
Phone book
Update
List
Surname
First name
Ring tone
Back Return in the basic menu of the telephone.
Note
The readout of the menu
Phone
and the voice control are no
t possible in the Chinese
language.
s3j8.a.book Page 109 Tuesday, April 20, 2010 1:10 PM