2010 Seat Leon 5D audio

Contents
2ContentsGeneral information
. . . . . . . . . . . . . . . .
Important Information
. . . . . . . . . . . . .
Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . .
Before using the unit for the first time
. . . . .
Safety instructions
. . . . . . . . . . . . . . . . . . . . . . . .
Unit overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General operating information
. . . . . . . . . . . .
Audio mode
. . . . . . . . . . . . . . . . . . . . . . . . . .
Radio mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RDS radio data and TP (Traffic Programme)
services
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DAB digital radio mode
. . . . . . . . . . . . . . . . . . .
Media mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MEDIA-IN multimedia interface
. . . . . . . . . . . .
Navigation
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction to navigation
. . . . . . . . . . . . . . . .
Enter destination
. . . . . . . . . . . . . . . . . . . . . . . . .
Destination memory
. . . . . . . . . . . . . . . . . . . . . .
Route guidance
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Te l e p h o n e c o n t r o l ( P h o n e )
. . . . . . .
Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stored numbers
. . . . . . . . . . . . . . . . . . . . . . . . . .
Using the telephone
. . . . . . . . . . . . . . . . . . . . . .
Settings (SETUP)
. . . . . . . . . . . . . . . . . . . .
Sound, volume and system settings
. . . . . . .
Abbreviations
. . . . . . . . . . . . . . . . . . . . . . .
Abbreviations
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
5
6
6
6
8
10
14
14
21
24
29
42
47
47
52
58
63 75
75
81
84
87
87
90
90
91
MediaSystem2.1_EN.book Seite 2 Donnerstag, 29. April 2010 4:18 16

Important Information5
Important InformationImportant Information. Traffic safetyToday's traffic conditions require the full attention of all road users.
Only operate the radio and its various functions when the traffic situation
really permits this.
WARNING
•Before starting the trip, you should familiarise yourself with the
different radio functions.•High audio volume may represent a danger to you and to others.•Adjust the volume in a way that you can distinguish surrounding noise,
for example, horns and sirens, etc.•Radio settings should be made when the car is stopped or by a
passenger.Note
If the radio is lost with the code, go to a SEAT Dealer, who will help you.
MediaSystem2.1_EN.book Seite 5 Donnerstag, 29. April 2010 4:18 16

Introduction
6IntroductionBefore using the unit for the first timeBefore using the unit for the first time, carry out the following steps. This will
enable you to use the unit safely and make full use of the functions it
provides•Observe the basic safety notes
’ ⇒ page 10.
•Familiarise yourself with the unit overview ⇒ page 8.•Restore factory settings (standard settings) in the system settings menu
⇒ page 87.•Use suitable data media for Media mode ⇒ page 29.Safety instructions
WARNING
Your attention may be distracted from the traffic if you use the radio and
navigation system while driving, resulting in accident.•You should always drive with due care and attention.•Select volume settings that allow you to easily hear signals from
outside the vehicle at all times (e.g. emergency service sirens).•If the volume is too high, you could damage your hearing. Even if the
volume is too loud for a short period only.
WARNING
The recommendations and traffic signs shown by the navigation system
may differ from the true traffic conditions.•Traffic signs and traffic regulations have priority over the recommenda-
tions and instructions given by the navigation system.•Adapt your speed and driving style to suit visibility, road, traffic and
weather conditions.WARNING
External devices that are placed loose in the vehicle or not properly secured
could be flung though the interior during a sudden driving or braking
manoeuvre, or in the event of an accident.•While the vehicle is in motion, always fasten or store external devices
securely outside the airbag deployment zones.•Arrange the connecting leads of external devices so that they do not
obstruct the driver.WARNING
The volume level may suddenly change when you switch audio source or
connect a new audio source.•Reduce the base volume before switching audio sources or connecting
a new audio source ⇒page 11.WARNING
Opening a CD player's housing may lead to injuries from invisible laser
radiation.
MediaSystem2.1_EN.book Seite 6 Donnerstag, 29. April 2010 4:18 16

Introduction9
Arrow buttons and always affect the currently active audio source
irrespective of the menu displayed on the screen.
− In all radio modes , press briefly (please observe the respective
display
­
) to change station or channel ⇒page 14.
− In Media mode , press briefly to change title or chapter, and hold down
to fast forward or rewind ⇒page 29.
CD slot ⇒page 29.
Touch scre en ⇒page 10.
CD eject button ⇒page 29.
Press Info to display additional information relating to the menu:
− Display or hide the radio text in Radio mode ⇒ page 21.
− Display additional title information (stored position) in Media mode
⇒ page 29.
− While navigating , to display current position of vehicle or
programmed destination ⇒page 47.
Press the back button to close menus and pop-up windows.
AUX-IN multimedia socket for connecting external audio sources
⇒ page 29.
Setting knob : the function depends on which mode is activated.
− In all radio modes , turn to manually change the station or channel
⇒ page 14.
− In Media mode , turn to manually change the title and press to stop
and start the scan function ⇒page 29.
− Tu r n to modify the map scale ⇒ page 63.
− During the route guidance , press to repeat a navigation instruction
⇒ page 63.
Function buttons : the current function is displayed on the screen via the
corresponding function button. ⇒page 10.
Memory card slot ⇒page 29.
A3
ƒ
„
A4A5A6
š
A7
º
A8
E
A9A10A11A12
MediaSystem2.1_EN.book Seite 9 Donnerstag, 29. April 2010 4:18 16

Introduction
10General operating informationIntroductionDue to changes to its settings, some aspects of the unit's operation may
differ from the descriptions given in this manual. For this reason, SEAT recom-
mends that you reset the unit to its factory settings the first time you use it
⇒ page 87.
Additional Information:•Safety notes
’ ⇒ page 6
•Unit overview ⇒page 8•Multifunction steering wheel, to change track or station ⇒Booklet
“Owner's Manual”, Section “Vehicle overview” Note
Lightly pressing the buttons or briefly pressing the touchscreen is sufficient
to operate the unit.
Note
Never press a button down for longer than 10 minutes. Otherwise the system
will interpret this as a malfunction ( button jammed).
Note
Due to country-specific legislation, certain functions cannot be selected on
the screen when the vehicle is travelling above a certain speed.
Note
Using a mobile telephone in the vehicle may cause noise from the vehicle
speakers.
Note
In some vehicles equipped with a parking distance warning system, the
volume of the current audio source is automatically lowered when reverse
gear is engaged.
Note
Restrictions on the use of devices using Bluetooth technology may be appli-
cable in some countries. Please ask your local authority for further
information.Switching on and offPress the rotary/push knob
D ⇒ page 8, fig. 1 briefly to manually switch
the unit on or off.
When the system is switched on, the sound source which was playing when
the unit was switched off will come on.
When the engine is off, the unit will automatically switch off after 30 minutes
(timeout).
Anti-theft code
The anti-theft code is stored in the vehicle once it has been entered (conven-
ience radio code). The anti-theft coding lock then only needs to be released
manually if the unit is installed in another vehicle. In such a case, a keypad
field and a prompt to enter the code will appear when the unit is switched on.
In this case, you should contact a SEAT dealer.
If the vehicle battery has been disconnected, switch on the ignition before re-
connecting the unit.
A1
MediaSystem2.1_EN.book Seite 10 Donnerstag, 29. April 2010 4:18 16

Introduction11
Adjusting the base volumeChanges to the volume are indicated by a “bar” on the screen. During this
time the unit cannot be operated.
At “0” the unit is muted (display:
) and the current media source is
stopped.
It is possible to preset certain volume settings and adjustments ⇒ page 87.
WARNING
Your attention may be distracted from the traffic if you use the radio and
navigation system while driving, resulting in accident.•You should always drive with due care and attention.•Select volume settings that allow you to easily hear signals from
outside the vehicle at all times (e.g. emergency service sirens).•If the volume is too high, you could damage your hearing. Even if the
volume is too loud for a short period only.Caution
If the volume is too high or the sound is distorted, the vehicle speakers may
be damaged.
Note
If the base volume has been turned up high to play an audio source (e.g. due
to very quiet audio output from an external audio source), lower the volume
again before switching audio source.Additional information and display optionsThe text displayed on the screen may vary depending on the settings and may
not match the illustrations shown here.
All displays appear only after the radio-navigation system has completed
start-up.
Depending on the vehicle, the changes to the air conditioning settings or the
texts relating to driver assistance systems fitted at the factory are displayed.
These displays disappear automatically when they are no longer required.
Function
Action
Increase the vol-
ume.
Turn the sound control knob
D ⇒ page 8, fig. 1 to the
right, or press the button on the multifunction steer-
ing wheel ⇒Booklet “Owner's Manual”.
Lower the vol-
ume.
Turn the volume control
D anti-clockwise
or press the button on the multifunction steering
wheel.

MediaSystem2.1_EN.book Seite 11 Donnerstag, 29. April 2010 4:18 16

Audio mode
14Audio modeRadio modeIntroductionAdditional Information:•Safety notes
’ ⇒ page 6
•Unit overview ⇒page 8Note
Car parks, tunnels, tall buildings or mountains may affect the radio signal.
Note
Foil or metal-coated stickers attached to the windows may affect reception on
vehicles with a window aerial.
Opening the RADIO main menu
Fig. 4 RADIO main menu
with station buttons
displayed.Fig. 5 RADIO main menu
without station buttons.
MediaSystem2.1_EN.book Seite 14 Donnerstag, 29. April 2010 4:18 16

Audio mode15
•Press the unit button.
The station you are currently listening to is shown in the middle of the screen.
The “station buttons” in the main RADIO menu ⇒page 14, fig. 4 can be
displayed or hidden ⇒page 18.
Displaying station name (RDS)
If RDS is available and reception is good enough, the station name is
displayed (in page 14, fig. 5 : Radio 2 ).
The RDS (Radio Data System) is not compatible with all units and is not avail-
able everywhere or on all radio stations.
In addition, the RDS permits automatic tracking of stations, radio texts or
traffic programmes ⇒page 21.Changing frequency band
The currently selected frequency band is indicated above the station display
and in the bottom line of the screen.
Changing frequency band•In the RADIO main menu, press the unit button.•ALTERNATIVELY: Press the function button and select the range of
frequencies by pressing the corresponding button ⇒fig. 6.Changing radio station or selecting radio stations from the FM station listChange radio station by pressing the arrow buttons or .•Briefly press an arrow button or .
Depending on the arrow button settings ⇒page 19, it is only possible to
change between stored stations (display:
­
in ⇒page 19, fig. 13 ).
RADIO
Fig. 6 RADIO main menu:
Band function button.
RADIO
Band
Fig. 7 Station list: the
current station is high-
lighted.ƒ
„
ƒ
„
MediaSystem2.1_EN.book Seite 15 Donnerstag, 29. April 2010 4:18 16