2010 Seat Leon 5D buttons

Audio mode
18Hiding and displaying station buttons and storing stationsIn the main RADIO menu, the radio stations can be saved in numbered func-
tion buttons ⇒ fig. 12. These function buttons are called “station buttons”.
Station buttons can be hidden or displayed. Displaying and hiding the station buttons
•In the
RADIO main menu, press the function button ⇒fig. 11 .•To hide or display the station buttons, clear or tick the checkbox in the
function button by briefly pressing it.•When the checkbox is ticked
’, six station buttons are displayed in the
RADIO main menu ⇒fig. 12 .
•Turn the setting knob ⇒page 8, fig. 1 to select a station button. If you
are selecting the first or last station button, when the setting knob is turned
either way, the next six station buttons are displayed.
If, even though the check box has been ticked, the station buttons are not
displayed, the “radio text” option may be activated ⇒page 21.
Saving stations in station button
If a station is saved to a station button, any station previously saved to the
button will be overwritten.•Display the station buttons and select a station.•Press and hold the desired station button until you hear a tone.•The currently selected station is saved to the station button ⇒page 19,
fig. 13.•ALTERNATIVELY: Select the station button by turning the setting knob and
press and hold the setting knob until you hear a tone.
The stations can also be saved with only the settings knob.•Press and hold the settings knob until the next free station button for the
currently selected station is automatically displayed.•Turn the setting knob to select another station button.•Briefly press the setting button to save the station.
The stations can also be selected by displaying the station list ⇒page 16.
If a station name has been sent by the RDS and saved incorrectly, it is
possible to change its name ⇒page 21.
Fig. 11 RADIO main
menu: Extras function
button.F i g . 1 2 R A D I O m a i n m e n u
with station buttons
displayed.
Extras
Presets
A10
MediaSystem2.1_EN.book Seite 18 Donnerstag, 29. April 2010 4:18 16

Audio mode19
You can delete the stations stored to the station buttons individually or all
together ⇒page 19.
Note
If you do not usually use the station buttons to select stations, SEAT recom-
mends that you hide the station buttons. You can then go straight to the
station list by turning the setting knob ⇒page 16.Selecting stations saved on the station buttonsIt may be necessary to hide the “radio text” ⇒ page 21.•Open the RADIO main menu and if necessary adjust the setting to display
the station buttons ⇒ page 18.•Turn the setting knob ⇒page 8, fig. 1 to select a station button. The
station stored to the marked station button will be displayed.•Press the setting knob to select the displayed station.
•ALTERNATIVELY: Briefly press the station button on the screen to select
the stored station directly.•Alternatively: if
­
is displayed ⇒fig. 13 , the stored stations can be
activated one after the other by pressing the arrow keys and
⇒ page 19.
The stations in all the frequencies can be changed. The stored stations can be
deleted one by one or all together ⇒page 19.
It is only possible to play a stored station if it can be received at your current
location.
Radio setup menu (SETUP)In the RADIO main menu, press the unit button to open the Radio
setup menu .
F i g . 1 3 R A D I O m a i n m e n u
with station buttons
displayed.
A10
ƒ
„
Fig. 14 Setup menu for
Radio mode.
SETUP
MediaSystem2.1_EN.book Seite 19 Donnerstag, 29. April 2010 4:18 16

Audio mode
20Function button: Result
: The TP function is switched on ⇒page 21.: Define the station selection for the arrow buttons and
.: All available stations on the selected frequency band can be
browsed with the arrow buttons ⇒page 15.: Using only the arrow keys, switch between the stored sta-
tions ⇒ page 19 (display:
­
⇒ page 19, fig. 13).
: Define the setting for automatic station tracking with RDS
⇒ page 21.: The unit always switches to the radio station's frequency
that currently offers the best reception. As a result, regional pro-
grammes may be interrupted.
: For as long as possible, the unit only switches to alternative fre-
quencies for the selected radio station that broadcast the same
regional service.: in units with a DAB radio receiver, this may affect other addi-
tional settings ⇒page 24.: Delete stations stored to station buttons.
: All stored stations will be deleted.: Tu rn the setting knob ⇒page 8, fig. 1 to display, one after
the other, all the stations stored on the station buttons, and press the
same button to delete the station displayed.
To cancel, press the unit button ⇒page 8, fig. 1 .’ Traffic news (TP)b Arrow buttons
ƒ
„
StationsPresets
bRDS Regional
AutomaticFixed
DAB settingsDelete preset list
AllOne
A10

A8
MediaSystem2.1_EN.book Seite 20 Donnerstag, 29. April 2010 4:18 16

Audio mode25
OperationStarting DAB Radio mode•In the main RADIO menu, briefly press to switch between the avail-
able wavebands.
•ALTERNATIVELY: Press the function button and press the
function button in the pop-up window ⇒fig. 19 .
When in DAB radio mode, the last played digital station will be played,
provided reception is still possible in the current location ⇒fig. 20.
The selected ensemble is displayed in the upper line of the screen (Ensemble
A), and the currently playing DAB station is displayed below ( DAB-Radio A-2).
Changing DAB stations•Briefly press one of the unit's arrow buttons ⇒ page 8, fig. 1 .
After you have reached the last (or first) DAB station in the currently selected
ensemble, the unit changes to the first (or last) DAB station of the next
ensemble.
Please note
­
! If ­
is displayed, the unit will only analogically tune into
the stations stored in the station buttons in FM radio mode ⇒page 14.
Activate additional DAB stations
If an additional station is available for the currently playing DAB station, the
corresponding display will be visible below the station name.
It is possible to tune into all the available additional stations, switching from
one to the next.
•Briefly press the setting knob ⇒ page 8, fig. 1 to change to the next
available additional station.•Alternatively: if the station has been allocated to a station button, briefly
press this button ⇒page 14.
After scanning through all the additional stations, the unit will switch back to
the main station.•Alternatively: press the function button and
1)
in the pop-up window.
Fig. 19 Switch to DAB
digital radio mode.Fig. 20 Digital radio main
menu.
RADIO
1)The unit only displays whether there are additional stations available for the currently
playing station.
Band
DAB/ListA3
A3
Extras
Additional stations
MediaSystem2.1_EN.book Seite 25 Donnerstag, 29. April 2010 4:18 16

Audio mode
26•Alternatively: switch on the additional stations from the list of DAB
stations ⇒page 26.Note
The stations are stored to the station buttons in the same way as that
described for the conventional radio mode ⇒page 14.
Note
The scan function stops and starts in the same way as that described for the
conventional Radio mode ⇒page 14.DAB station list
The DAB station list gives all the DAB ensembles which can be played with the
corresponding DAB station.
Opening and closing the DAB station list•In DAB radio mode, press the function button and press the
function button in the pop-up window ⇒page 25, fig. 19 .•Alternatively:if the station button display is not on in DAB radio mode
⇒ page 18, turn the setting knob ⇒page 8, fig. 1 to open the DAB
station list.•To close the station list, press the function button.
If the list is not used, it will close automatically after one minute.
Select a DAB station and change the DAB ensemble
When the DAB station list is opened, the currently playing station is displayed
highlighted. The ensemble for the currently playing station is shown as open
⇒ fig. 21.•Turn and press the setting knob ⇒page 8, fig. 1 to select and switch
on a station in an open ensemble.
Fig. 21 DAB station list:
select a station.
Fig. 22 DAB station list:
select an ensemble.
Band
DAB/List
A10

A10
MediaSystem2.1_EN.book Seite 26 Donnerstag, 29. April 2010 4:18 16

Audio mode27
•Turn the setting knob to the left until the open ensemble has been
selected, for example, .•Press the setting knob to close the ensemble display.•Turn the setting button to select another ensemble ⇒page 26, fig. 22.•Turn the setting button to open the selected ensemble.•Switch on the station by touching the screen, or by turning and pressing
the setting knob.
Switching on additional stations on the DAB station list
If there are additional stations for a DAB station, an arrow is displayed before
the name of the station
b.
If one of these stations is switched on from the list, first another list is opened
for you to select whether you wish to listen to the main station o one of the
additional stations.
Updating the DAB station list
While the stations are being updated, the unit searches the dial for available
ensembles in the region.
Even though the unit is not operating in DAB mode, the list of DAB stations
will be automatically updated.
The list of digital stations can also be updated manually.
•Press the function button in the DAB station list ⇒page 26,
fig. 21 .•Wait until the update has completed.•Alternatively: press the function button.
While the stations are being updated, a pop-up window opens and the
volume of the DAB radio is muted.
The pop-up window closes once the update is complete.
The currently playing DAB station is not modified with the update. Displays and function buttons in the DAB station list
DAB settings•In Radio mode, press the button.•In the
Radio setup menu , press the button.
tEnsemble B
Update
Cancel
Display: Meaning
: ensemble closed.: ensemble open.
: DAB station in an open ensemble.: the DAB station offers other additional stations.: temporarily without reception of the DAB station.: station received on FM band. Temporarily unable
to receive DAB.
: to save a selected station to a station button ⇒page 14.
: to update the DAB station list.
…Ensemblet Ensemble‰Radio DAB A-x‰b Radio DAB A-x‰Radio DAB A-x µ‰Radio DAB A-x (FM)SaveUpdating
SETUP
DAB settings
MediaSystem2.1_EN.book Seite 27 Donnerstag, 29. April 2010 4:18 16

Audio mode
38Changing track manuallyStart playback of a media source that can be controlled via the radio-naviga-
tion system (CD, memory card, MDI). You can browse through the tracks of the current media source or select a
specific track from the track list.
Browsing tracks with the arrow buttons
Opening and scrolling through the track list
•Open the
MEDIA main menu.•Press the function button or turn the setting knob ⇒page 8, fig. 1
to open the track list. The track that is currently playing is highlighted
⇒ fig. 34.•Mark a track by turning the setting knob and press the setting knob to
select the marked track.•Alternatively: Drag the scroll marker to browse the list quickly and select
the desired track by pressing it on the screen ⇒page 10.
Searching the folder structure in MP3 mode
When the track list is opened, subfolders
G and playlists
p may appear in
the list alongside the tracks
 ⇒ fig. 35. The name of the folder containing
the track that is currently playing is displayed in the bottom line of the screen
(in fig. 34: F2).
Fig. 34 Track list of a
currently playing audio
MP3 CD.Fig. 35 Highest level of a
currently playing audio
MP3 CD.
Action
Result
Briefly press the arrow once .
Goes to start of track.
Briefly press the arrow twice .
Goes to start of previous track.
Briefly press the arrow once .
Goes to the next track.
Press and hold the arrow button
.
Rewind.
Press and hold the arrow button
.
Fast forward.
Provided the currently playing audio source can be controlled from the unit,
it can be operated from any menu via the arrow buttons on the unit.
ƒƒ„
ƒ„
Select
A10
MediaSystem2.1_EN.book Seite 38 Donnerstag, 29. April 2010 4:18 16

Navigation51
The position of the on-screen keyboard can be defined in the system settings
⇒page 87.
Input windows for “free text input”
An input window for free text input allows any letters, digits and special char-
acters to be entered in any combination ⇒page 50, fig. 45.
Pressing the function button applies the sequence of characters currently
displayed in the window.
Input windows for selecting a destination address
It is only possible to enter a sequence of letters, numbers and special charac-
ters that matches a destination found in the available navigation data
⇒ page 50, fig. 46. That means you cannot freely enter any destination, but
must “choose” from the available destinations ⇒page 52.
Operating instructions•Available characters on the keyboard block are entered in the input
window when pressed.•ALTERNATIVELY: You can select characters by turning and pressing the
setting knob ⇒page 8, fig. 1 .
Other control elementsFunction button
Action and meaningPress to switch between upper and lower case.

Press to open the input window for numbers and special
characters.
Or:
Press to go back to the input window for letters.
and
Press to move the cursor to the left or right on the input
line.
˜
Press to enter a space.
OK
A10
:;A-Z
‚
b
Characters with
a
Hold down to display a pop-up window with special char-
acters based on this letter. Press the desired character to
enter it.Press to briefly highlight all function buttons on which
special characters are available.
Press a function button to open a pop-up window for
selection of a special character.Press to delete characters in the input line from right to
left.
Function button
Action and meaning
¶Delete
MediaSystem2.1_EN.book Seite 51 Donnerstag, 29. April 2010 4:18 16