2010 Seat Leon 5D ESP

Audio mode25
OperationStarting DAB Radio mode•In the main RADIO menu, briefly press to switch between the avail-
able wavebands.
•ALTERNATIVELY: Press the function button and press the
function button in the pop-up window ⇒fig. 19 .
When in DAB radio mode, the last played digital station will be played,
provided reception is still possible in the current location ⇒fig. 20.
The selected ensemble is displayed in the upper line of the screen (Ensemble
A), and the currently playing DAB station is displayed below ( DAB-Radio A-2).
Changing DAB stations•Briefly press one of the unit's arrow buttons ⇒ page 8, fig. 1 .
After you have reached the last (or first) DAB station in the currently selected
ensemble, the unit changes to the first (or last) DAB station of the next
ensemble.
Please note
­
! If ­
is displayed, the unit will only analogically tune into
the stations stored in the station buttons in FM radio mode ⇒page 14.
Activate additional DAB stations
If an additional station is available for the currently playing DAB station, the
corresponding display will be visible below the station name.
It is possible to tune into all the available additional stations, switching from
one to the next.
•Briefly press the setting knob ⇒ page 8, fig. 1 to change to the next
available additional station.•Alternatively: if the station has been allocated to a station button, briefly
press this button ⇒page 14.
After scanning through all the additional stations, the unit will switch back to
the main station.•Alternatively: press the function button and
1)
in the pop-up window.
Fig. 19 Switch to DAB
digital radio mode.Fig. 20 Digital radio main
menu.
RADIO
1)The unit only displays whether there are additional stations available for the currently
playing station.
Band
DAB/ListA3
A3
Extras
Additional stations
MediaSystem2.1_EN.book Seite 25 Donnerstag, 29. April 2010 4:18 16

Audio mode
26•Alternatively: switch on the additional stations from the list of DAB
stations ⇒page 26.Note
The stations are stored to the station buttons in the same way as that
described for the conventional radio mode ⇒page 14.
Note
The scan function stops and starts in the same way as that described for the
conventional Radio mode ⇒page 14.DAB station list
The DAB station list gives all the DAB ensembles which can be played with the
corresponding DAB station.
Opening and closing the DAB station list•In DAB radio mode, press the function button and press the
function button in the pop-up window ⇒page 25, fig. 19 .•Alternatively:if the station button display is not on in DAB radio mode
⇒ page 18, turn the setting knob ⇒page 8, fig. 1 to open the DAB
station list.•To close the station list, press the function button.
If the list is not used, it will close automatically after one minute.
Select a DAB station and change the DAB ensemble
When the DAB station list is opened, the currently playing station is displayed
highlighted. The ensemble for the currently playing station is shown as open
⇒ fig. 21.•Turn and press the setting knob ⇒page 8, fig. 1 to select and switch
on a station in an open ensemble.
Fig. 21 DAB station list:
select a station.
Fig. 22 DAB station list:
select an ensemble.
Band
DAB/List
A10

A10
MediaSystem2.1_EN.book Seite 26 Donnerstag, 29. April 2010 4:18 16

Audio mode
28DAB programme tracking and switching from DAB to FM
The DAB and FM station should broadcast the corresponding station identi-
fier in order to run programme tracking in several frequencies.
When the DAB reception is poor, the unit tries to find and tune into the corre-
sponding DAB station in the FM band.
As long as the station is broadcast through the FM band, (FM) is displayed
behind the station name. When the station can be found again in DAB, the
(FM) display disappears.
If the reception of a DAB station is poor and it cannot be found on FM either,
the radio volume is muted.
The DAB programme tracking function can be switched off if you do not wish
to change stations automatically, as the loss of signal is for a short time only,
for example, when driving though a tunnel.Function button: Result
: the incoming DAB messages are played with the
DAB radio mode on. If there is no FM station temporarily available and the
TP function is on, the DAB traffic reports are played in any operating mode
as TP reports ⇒page 21.
: tracking of activated programmes. To switch off, untick the
check box.
: The unit may be set to switch to the FM fre-
quency band when required for automatic station tracking.
’ DAB announcements’DAB tracking’ Automatic switch DAB-FM
MediaSystem2.1_EN.book Seite 28 Donnerstag, 29. April 2010 4:18 16

Audio mode29
Media modeIntroduction“Media sources ” are audio sources containing audio files on various different
data media (e.g. CD, memory card, exte rnal MP3 player). These audio files
can be played by the radio and navigation system from its corresponding
drives or audio input sockets (internal CD changer, memory card slot, AUX-IN
multimedia socket etc.).
The supported file formats listed are collectively referred to below as “audio
files”. A CD containing audio files of these types is referred to as an “audio
data CD”.
Additional Information:•Safety notes
’ ⇒ page 6
•Unit overview ⇒ page 8•Multimedia interface ⇒ page 42WARNING
Inserting a data medium while you are driving could distract you from the
road and result in accident.Media source and audio file requirementsFactory-fitted CD players conform to safety class 1 according to
DIN IEC 76 (CO) 6/ VDE 0837.
The unit only accepts 12-cm standard CDs and memory cards with the dimen-
sions 32 mm x 24 mm x 2.1 mm or 1.4 mm.
Media source
Requirements for playing in the unit
IAudio CDs with CD Digital
Audio logo
.
- CD Digital Audio specification.
ICD-ROM, CD-R and CD-RW
audio data CDs up to max.
700 MB (megabytes) compli-
ant with ISO 9660 or in the
Joliet file system.KSD and MMC memory
cards up to max. 2 GB (giga-
bytes) and SDHC memory
cards up to max. 32 GB.
- MP3 files (.mp3) with bit rates of between
48 and 320 kbit/s or with variable bit rate.
- WMA files (.wma) up to 9.2 mono/stereo
without copy protection.
- Playlists in the formats PLS, M3U and WPL.
- File names and paths no longer than 256
characters.
- Folder structures with a maximum of eight
levels.
- Audio data CDs with max. 50 folders and
max. 500 files.
- Memory cards with max. 5000 folders and
max. 15000 files with max. 6000 files per
folder.

Playing audio files via Blue-
tooth
®a).
a)Bluetooth
® is a registered trademark of Bluetooth SIG, Inc.
- The external audio source must be compat-
ible with the Bluetooth A2DP profile.
AUX. External audio source.
– Audio output is possible with a 3.5 mm
jack connector ⇒page 8, fig. 1 .
MDI. External data medium.
- Compatible with MEDIA-IN multimedia
interface ⇒page 42.
AUX2 . Additional external
source
- Depending on the vehicle equipment, this
source can be used to play audio from an
external player connected to a Rear Seat
Entertainment system (only if the vehicle
does not have MDI).
A9
MediaSystem2.1_EN.book Seite 29 Donnerstag, 29. April 2010 4:18 16

Audio mode31
The illustration ⇒page 30, fig. 23 shows a typical audio data CD that
contains tracks
B, folders
A and subfolders.
The tracks are played in the following order:
1. Tracks and in the CD's root directory
2. Tracks and in the first folder F1 in the CD's root directory
3. Track in the first subfolder F1.1 of the folder F1
4. Track in the first subfolder F1.1.1 of the subfolder F1.1
5. Track in the second subfolder F1.2 of the folder F1
6. Tracks and in the second folder F2
The playlists
p are also treated as folders.
MEDIA main menu
In the MEDIA main menu, various media sources can be selected and played.•Press the unit button.
The last media source played continues to be played.
The media source being played is displayed in the centre of the bottom line
of the screen in the MEDIA main menu.
If it is not possible to select a media source, when you try to enter the main
menu MEDIA a pop-up window opens displaying the function button.
If this function button is pressed, the check box Activate AUX2 input is
marked in the Media Setup menu, and in the Media Selector, the MDI source
or the AUX2 source (depending upon the vehicle configuration) is displayed
as active, even if there is no device connected to this source. Therefore, this
option should not be switched on, except in the cases shown (see ⇒page 34
and ⇒page 42.
Track information display
As the default display, Track and the track number corresponding to the track
order on the CD are displayed in the centre of the screen ⇒fig. 24.
A1
A2
A3
A4
A5A6A7A8
A9
Fig. 24 MEDIA main
menu: Audio CD track
display.
Fig. 25 MEDIA main
menu: Track display for an
audio data CD.
MEDIA
AUX2
MediaSystem2.1_EN.book Seite 31 Donnerstag, 29. April 2010 4:18 16

Audio mode
40Starting and stopping a playback mode
The range of playback modes available depends on the selected media
source and the type of audio files played.•During playback, press the function button in the MEDIA main
menu.•In the pop-up window, press one of the playback modes listed by turning
and pressing the setting knob ⇒page 8, fig. 1 .•The pop-up window will close. The selected playback mode is indicated in
the function button ( page 39, fig. 37 ).•Briefly pressing this function button ends the playback mode and
resumes normal playback at the current track.
Refer to the information on the playing order of files and folders ⇒ page 30.
The scan function can also be started or stopped by briefly pressing the
setting knob ⇒ page 8, fig. 1 .
Available playback modes
Setup Menu Media (SETUP)In Media mode, press the unit button to open the Media setup menu.
The selection options depend on the type of unit and equipment.
Function button: Result
: Each track of the current folder or current media source will be
played for 10 seconds. The scan function starts at the next track.: The tracks of the current audio CD will be played in random order.
: The tracks of the current folder will be played in random order.: The tracks of the current data medium will be played in random
order.
: Repeats the currently playing title.
Extras
A10
Mix all
A10
ScanMixMix folderMix allRepeat track
: At the end of the current audio CD, its tracks will be played
again.: At the end of the current folder, its tracks will be played
again.
The random play and repeat functions remain active for the corresponding
media source until they are closed for that source.Function button: Result
: Subfolders are included in the selected play-
back mode ⇒page 39.
This setting must be defined before the playback mode is activated.
: Adjust the input volume for an external audio source in the
AUX-IN multimedia socket ⇒page 8, fig. 1 to the output volume of the
other audio sources ⇒ page 33.: Adjust the input volume for an iPod
® or iPhone
® connected
to the MEDIA-IN multimedia interface to the playback volume of the other
audio sources ⇒ page 42.
a): Adjust the input volume for a Bluetooth audio source to
the playback volume of the other audio sources.
a)These functions can only be selected if the unit has the function.
: Adjust the input volume for an AUX2 external audio source
to the ⇒ table on page 40 playback volume of the other audio sources
⇒ page 33.
Function button: ResultRepeat CDRepeat folder
SETUP
’Scan/Mix/Repeat incl. GbAUX volume
A9
b MDI volumeBT-Audio volumebAUX2 volume
MediaSystem2.1_EN.book Seite 40 Donnerstag, 29. April 2010 4:18 16

Navigation47
NavigationIntroduction to navigationIntroductionGeneral information
The current vehicle position is determined by means of the GPS system
(Global Positioning System). Sensors in the vehicle measure distances
driven. The measurements are adapted using the detailed information given
in the navigation data medium ma ps and according to the programmed
traffic management. Where applicable, TMC traffic reports are included in the
calculation of routes ⇒ page 70. The navigation system uses these data to
determine an optimal route to the destination.
The destination is defined by entering an address or a point of interest, e.g.
apetrol station or hotel.
Navigation announcements and visual guidance on the navigation unit and
the instrument panel direct you to your destination ⇒page 63.
Depending on the country, some radio-navigation system functions can no
longer be selected when the vehicle is travelling above a certain speed. This
is not a malfunction, but simply a legal requirement.
Navigation data
In normal circumstances, all the necessary navigation data is already stored
in the navigator. A memory card containing the navigation data can be
obtained from an Authorised Service to update this information ⇒page 48.
Additional Information:•Safety notes
’ ⇒ page 6
•Unit overview ⇒ page 8•Entering a destination ⇒page 52
•Destination memory ⇒page 58•Route guidance ⇒ page 63Note
Dirty or damaged navigation data media may lead to problems when copying
navigation information or even in the navigation itself. Store unused data
media in a suitable container or in the original box to protect them from
mechanical damage, heat, humidity or direct sunlight.Limitations of the navigation functionPossible errors in navigation
If the navigation system is not able to receive data from the GPS satellites
(dense vegetation, underground garage), it is still possible to navigate using
the vehicle sensory analysis.
In areas that are not or only partially digitised on the data medium
(e.g. insufficient definition of one-way streets and road categories), the navi-
gation system will still attempt to provide route guidance.
If navigation data are unavailable or incomplete, the navigation system may
be unable to determine the exact vehicle position. As a result, the navigation
may not be as exact as usual.
Navigation area and age of navigation data
The accuracy of the data (small villages, streets and house numbers)
depends on the respective version for the country.
Roads and streets are subject to constant change (e.g. new roads, changes to
street names and house numbers). After some time, navigation data will no
MediaSystem2.1_EN.book Seite 47 Donnerstag, 29. April 2010 4:18 16

Navigation
50Selecting destination entry in the Navigation main menu•Open the Navigation main menu ⇒page 49, fig. 43.•Turn the setting knob ⇒page 8, fig. 1 to select a symbol for destina-
tion entry. The type of destination entry currently marked is displayed in the
centre of the screen (in page 49, fig. 43: Address ).•Press the setting knob to select the displayed destination entry method.•Alternatively: Press a destination entry symbol on the screen.
When a function button has been pressed, the corresponding window will
open to allow you to enter the destination ⇒page 52.
Destination entry methods
Input windows with on-screen keyboardInput windows with an on-screen keyboard are used to select a destination
address or, for example, to enter an entry name.
Function button: Result Address : Open input windows for selection of a destination address. Destination memory : Open a list of manually stored destinations.Last destinations: Open a list of automatically stored last destinations. Petrol station : Open a list of the nearest petrol stations.Car park: Open a list of the nearest car parks.Point of interest : First select the search area and then enter the search
term.
: Enter the home address, or go to one of the saved
addresses.
A10
$*•zP–Home address
Fig. 45 Keyboard for free
text input.Fig. 46 Input window for
selecting a destination
town.
MediaSystem2.1_EN.book Seite 50 Donnerstag, 29. April 2010 4:18 16