2010 Seat Ibiza ST Owner's manual

Page 233 of 264

Seat Ibiza ST 2010  Owners manual If and when231
Safety First
Operating Instructions
Practical Tips
Technical Specifications
– First fit the glass with the fastening tabs over the frame of the 
switch. Next press the front part unti

Page 234 of 264

Seat Ibiza ST 2010  Owners manual If and when
232Jump leads
Jump leads must comply with standard  DIN 72553 (see manufacturer’s docu-
mentation). The wire cross section must be at least 25 mm
2 for petrol engines 
and at least 35 mm

Page 235 of 264

Seat Ibiza ST 2010  Owners manual If and when233
Safety First
Operating Instructions
Practical Tips
Technical Specifications
6.  Connect the other end of the  black jump lead   to a solid metal 
component bolted to the engine block or

Page 236 of 264

Seat Ibiza ST 2010  Owners manual If and when
234Towing and tow-startingTo w - s t a r t i n g *
The use of jump leads is preferable to tow-starting.We recommend that you do  not tow-start your vehicle. Jump-starting 
is preferable

Page 237 of 264

Seat Ibiza ST 2010  Owners manual If and when235
Safety First
Operating Instructions
Practical Tips
Technical Specifications
Do not pull too hard with the towing vehicle and take care to avoid jerking the 
tow-rope. When towing on an

Page 238 of 264

Seat Ibiza ST 2010  Owners manual If and when
236Rear towing eyeThere is a towing eye at the rear on the right below the rear bumper.
Fig. 166  Rear towing ring
IbizaST_EN.book  Seite 236  Dienstag, 14. September 2010  1:31 13

Page 239 of 264

Seat Ibiza ST 2010  Owners manual Description of specifications237
Safety First
Operating Instructions
Practical Tips
Technical Specifications
Technical SpecificationsDescription of specificationsImportant informationImportant
The inf

Page 240 of 264

Seat Ibiza ST 2010  Owners manual Description of specifications
238Vehicle identification data
The most important information is given on the identification 
plate and the vehicle data sticker.Vehicles for certain export countries do