
Accessories, parts replacement and modifications285
Safety FirstOperating instructionsPractical tipsTe c h n i c a l  D a t a
Accessories, parts replacement and modifications
Accessories, replacement of parts and 
modifications
Introduction
WARNING
The use of spare parts and accessories, or incorrectly performed modifica-
tions or repairs may result in damage to the vehicle, accidents and serious 
injury.
 xSEAT strongly recommends you to only use SEAT approved accessories 
and SEAT® original spare parts. These parts and accessories have been 
specially tested by SEAT for suitability, reliability and safety.
 xHave any repairs or modifications carried out at a qualified workshop. 
Qualified workshops have the necessary tools, diagnostics equipment, 
repair information and qualified personnel.
 xOnly mount parts with the same specifications as the parts fitted at 
factory.
 xNever mount, fasten or fit objects such as drink holders or telephone 
cradles over the covers of the airbag modules or within their radius of 
action.
 xOnly use wheels and tyre combinations which have been approved by 
SEAT for your vehicle type.
Accessories and spare parts
SEAT recommends you consult an Official Service before purchasing accesso-
ries and spare parts or consumables. For example, when fitting accessories 
at a later date, or when replacing a component. A Technical Service will advise 
you as to the legal requirements and manufacturer's recommendations 
regarding accessories, spare parts and other components.
SEAT recommend you use only approved SEAT accessories and genuine SEAT 
spare parts
®. These parts and accessories have been specially tested by 
SEAT for suitability, reliability and safety. In addition the Technical Service will 
guarantee that the assembly is carried out professionally.
Although we continually monitor the market, SEAT cannot guarantee that 
products not approved by SEAT are reliable, safe and suitable for the vehicle. 
Therefore, SEAT cannot accept liability, even in those cases authorised by an 
officially recognised technical inspection office or other official body.
Any retro-fitted equipment which has a direct effect on the vehicle and/or the 
way it is driven must be approved by SEAT for use in your vehicle and bear the 
e mark (the European Union's authorisation symbol). This includes cruise 
control systems or electronically controlled suspension.
If any additional electrical components are fitted which do not serve to 
control the vehicle itself, these must bear the 
 & mark (European Union 
manufacturer conformity declaration). This includes refrigerator boxes, 
laptops or ventilator fans.
WARNING
Unprofessional repairs or modifications to the vehicle may affect the 
performance of the airbags, resulting in operating faults or fatal accident. 

Accessories, parts replacement and modifications287
Safety FirstOperating instructionsPractical tipsTe c h n i c a l  D a t a The Technical Service does not accept liability for damage resulting from 
technical modifications or repairs performed incorrectly; neither is the SEAT 
warranty valid in these cases.
SEAT recommends you have any technical modifications or repairs performed 
at a SEAT authorised service and that you use genuine SEAT spare parts
®.
Vehicles with special accessories and equipment
The manufacturers of additional equipment guarantee that the equipment 
complies with applicable laws and regulations with respect to the environ-
ment, in particular Directives 2000/53/CE and 2003/11/CE. The first direc-
tive governs the disposal of end-of-life vehicles while the second refers to the 
restrictions on the marketing and use of certain dangerous substances and 
preparations.
The vehicle owner should keep the documentation for the additional equip-
ment safely and hand it over to the scrap yard at the end of the vehicle's 
service life. This ensures that any additional equipment mounted in end-of-
life vehicles is correctly disposed of with respect for the environment.
WARNING
Repairs or modifications which are not performed correctly may result in 
damage or errors in the vehicle operation, affecting the efficiency of the 
driver assist systems. This could result in serious accident.
 xAll repairs and modifications to the vehicle should only be performed 
by a qualified workshop.
Repair and faults in the airbag system
When performing repairs and technical modifications, SEAT's directives 
must be observed!  ŸModifications and repairs to the front bumper, doors, front seats, and repairs 
to the roof or chassis should only be carried out in a qualified workshop. 
These components may contain parts or sensors belonging to the airbag 
system.
If work is carried out on the airbag system or remove and fit parts of the 
system when performing other repair work, parts of the airbag system may be 
damaged. The consequence may be that, in the event of an accident, the 
airbag inflates incorrectly or does not inflate at all.
So that the effectiveness of the airbag is not reduced and that removed parts 
do not cause any injuries or environmental pollution, regulations must be 
observed. These requirements are known to qualified dealerships.
Modifications to the vehicle suspension may affect the operation of the 
airbag system in the event of collision. For example, if wheel and tyre combi-
nations not approved by SEAT are used, or if the vehicle height is lowered, the 
suspension is stiffened or the suspension springs, telescopic arms, dampers, 
etc., are modified, the results received by the airbag sensors and sent to the 
control unit may not be accurate. For example, some modifications to the 
suspension could increase the force measured by the sensors and result in 
the triggering of the airbag systems in collisions. Under normal conditions, 
the measured values would be lower and the airbag would not have been trig-
gered. Other modifications may reduce the forces measured by the sensors 
and therefore the airbags are not triggered in situations when they should 
have triggered.
WARNING
Repairs or modifications which are not performed correctly may result in 
damage or errors in the vehicle operation, affecting the efficiency of the 
airbag systems. This could result in serious or fatal accident.
 xAll repairs and modifications to the vehicle should only be performed 
by a qualified workshop.
 xAirbag modules must never be repaired: if damaged, they must be 
replaced.