!
i
153
LOAD REDUCTION MODE 
 System which manages the use of cer- 
tain  functions  according  to  the  level  of 
charge remaining in the battery.  
 When the vehicle is being driven, the load  
reduction  function  temporarily  deactivates 
certain functions, such as the air condition-
ing, the heated rear screen...  
 The deactivated functions are reactivat- 
ed  automatically  as  soon  as  conditions 
permit.    A    fl   a t    b a t t e r y    p r e v e n t s    t h e    e n g i n e  
from  starting  (refer  to  the  corre-
 s p o n d i n g   p a r a g r a p h ) .    
 If  the  telephone  is  being  used  at 
this  time,  it  will  be  maintained  for
5  minutes  with  your  PEUGEOT 
Connect Sound's Bluetooth system.  
 System which manages the duration of  
use  of  certain  functions  to  conserve  a 
 s u f fi   c i e n t   l e v e l   o f   c h a r g e   i n   t h e   b a t t e r y .   
 After  the  engine  has  stopped,  you  can  
still  use  functions  such  as  the  audio 
equipment, windscreen  wipers,  dipped 
beam  headlamps, courtesy  lamps,  etc. 
 f o r    a    m a x i m u m    c o m b i n e d    d u r a t i o n    o f  
thirty minutes. 
  Exiting economy mode  
 These  functions  are  reactivated  auto- 
 m a t i c a l l y   n e x t   t i m e   t h e   v e h i c l e   i s   d r i v e n .   
   
     In order to resume the use of these 
functions  immediately,  start  the  en- 
gine and let it run for a few minutes.  
 The  time  available  to  you  will  then  be 
double the duration for which the engine 
is left running. However, this period will al-
 w a y s   b e   b e t w e e n   fi   v e   a n d   t h i r t y   m i n u t e s .  
  Switching to economy mode  
 Once  the  thirty  minutes  are  over,  a  
message  appears  on  the  multifunction 
screen  indicating  that  the  vehicle  has 
switched to economy mode and the ac-
tive functions are put on standby. 
CHANGING A WIPER BLADE 
 Procedure  for  replacing  a  worn  wiper  
blade  with  a  new  one  without  the  use 
of tools.  
  Removing a front or rear wiper  
blade  
   
     Raise the corresponding wiper arm. 
  
     Unclip the wiper blade and remove it.   
  Fitting a front or rear wiper  
blade  
   
     At  the  front,  check  the  size  of  the 
wiper  blade  as  the  shorter  blade  is  
 fi   t t e d    o n    t h e    r i g h t - h a n d    s i d e    o f    t h e  
vehicle. 
  
     Put  the  corresponding  new  wiper 
blade in place and clip it. 
  
     Fold down the wiper arm carefully.