!i
PRACTICAL INFORMATION
139
TOWING THE VEHICLE
Procedure for having your vehicle towed
or for towing another vehicle using a re-
movable towing eye.
Access to the tools Towing your vehicle
On the front bumper, pull on the cov-
er to unclip it.
Screw the towing eye in fully.
Install the towing bar.
Switch on the hazard warning lamps
on the towed vehicle.
On the rear bumper, unclip the cover
by pressing at the bottom.
Screw the towing eye in fully.
Install the towing bar.
Switch on the hazard warning lamps
on the towed vehicle.
Towing another vehicle
The towing eye is installed in a holder at
t h e b o t t o m o f t h e b o o t u n d e r t h e fl o o r .
F o r a c c e s s t o i t :
p l a c e t h e v e h i c l e i n " c o u p é " c o n fi g u -
ration,
open the boot,
r a i s e t h e fl o o r ,
remove the towing eye from the
holder. When towing with all four wheels
on the ground, always use a towing
bar.
When towing with only two wheels
on the ground, always use profes-
sional lifting equipment.
When towing with the engine off,
there is no longer any braking or
steering assistance.
Place the gear lever in neutral
(position N on the automatic
g e a r b o x ) .
F a i l u r e t o o b s e r v e t h i s s p e c i fi c instruction may result in damage
to certain braking units and the
absence of braking assistance
when the engine is restarted.
