2010 MITSUBISHI LANCER change time

Changing the Map Display 2-7
Basic Operation
2 Touch [
] to display a wide area
eng_a012
A wider area can be viewed each time [

] is touched.
3 Touch [
] to display a detailed
area
eng_a013
A more detailed area can be viewed each time [ ] is
touched.NOTE Perform these operations while the scale bar is being
displayed.
 Touch and hold [ ] or [ ] to change the scale using
smooth zoom.
Changing Map Orientation
The map orientation can be changed
according to various conditions.
1 Touch the orientation button
Orientation Markeng_a014
North-Up

eng_a015
Heading-Up
Each time the orientation mark is touched, the map
orientation is changed in the sequence “North-Up”
“Heading-Up” “Auto”.
Map OrientationMark Name Display Contents (Red) North-Up
The vehicle mark is rotated so
that the north of the map is
always facing the front (up).
(Red)Heading-
UpThe map is rotated so that
the vehicle is always facing
the front (up). (Blue)or (Blue)
Auto
“Heading-Up” or “North-
Up” is selected automatically,
depending on the map scale.“Heading-Up” is selected for a
scale of 1/16 miles (100m) or
less, and “North-Up” is selected
for a scale of 1/8 miles (250m)
or more.
In Two Maps DisplayWhen two maps are displayed, the left and right
maps are linked together, with either “Heading-Up” or
“North-Up” selected for both. However, when “Auto”
is set, different orientations can be selected for the left
and right maps, depending on the scale.






 


Listening to the Voice Guide 2-12Listening to the Voice GuideThe voice guide provides information
regarding the distance to the next intersection
on the route and the direction you should turn.
The voice guide comes on automatically
when approaching in intersection, but can
be activated at any time by the following
operation:
1 Touch the [Maneuver icon]
Maneuver Icon
eng_a032

eng_a033
The intersection guidance map is displayed, and voice
guidance is performed.NOTE The voice guidance volume and male or female voice
selection can be changed.
>>> “Other Settings” (page 10-5)






 


Editing the Route (Itinerary) 4-6
Adding a Way Point
A way point can be added to the current
route.
1 Touch [Add] in the itinerary list
screen
(page 4-4)
The destination search screen is displayed. 2 Touch one of the search methods
to search for the location
eng_a117-2
Refer to the following pages to search for the location.>>> [Address/Intersection] (page 3-2)
>>> [Point of Interest] (page 3-5)
>>> [Advanced Search] (page 3-8)
>>> [Previous 20] (page 3-7)
>>> [Address Book] (page 3-7)
3 Touch [Itinerary List]
eng_a118
4 Touch [Add] in the sequence
position in which it is to be visited
eng_a119
The searched location is added to the route as a way
point. 5 Touch [Start]
eng_a120
Guidance starts for the changed route.
Deleting
A destination or way point can be deleted.
1 Touch [Delete] in the itinerary list
screen
(page 4-4)
The delete itinerary screen is displayed. 2 Touch the location to delete
eng_a121
NOTE The location to be deleted will be highlighted.
Touch a location again to remove it from the deletion
target.
 Multiple locations can be selected at the same time.
 Touch [Select All] to delete all locations at the same
time. 3 Touch [Done]
eng_a122






 


Editing a Location 5-5
Address Book
5 Touch [Set to Address Book]
eng_a136
The information change is completed.
Deleting
Deleting a stored location.
1 Touch [Delete] of “Address
Book” in the Personal Settings screen
2
Touch the stored location to delete
eng_a137
NOTE The stored locations targeted for deletion are
displayed with a black highlight.
Touch a location again to remove it from the deletion
target.
 Multiple locations can be selected at the same time.
 Touch [Select All] to delete all stored locations at the
same time. 3 Touch [Done]
eng_a138
4 Touch [Yes]
eng_a139
The selected stored locations are deleted.






 


Listening to SIRIUS 6-12
Listening to SIRIUS
Only for vehicles equipped with satellite radio (SIRIUS) tuner
Display Contents
Normal Reception Screen
eng_a437
1) Preset Number
If the channel being received has been preset, the
preset number is displayed.
2) Band
Displays the band which is currently being listened to.3) Band Switching Button
Touch this button to switch bands.
4) TEXT Display
Information about the current channel is displayed.5) Preset Button
The preset number, channel number and channel
name is displayed.
6) [ ]
Touch this button to display the Sub Menu.
7) [Direct] The channel number entered to the screen directly is
displayed.8) [Category]
The category screen is displayed.9) [Text]
This switches the text display.
10) [ Channel], [Channel ]
Moves up and down one channel each time.
Touch and hold one of these buttons to
continuously change the channel. Release the
button to stop on a channel.
11) Incoming Category Name
The name of the category being received is
displayed.
12) Playback Mode

The currently selected playback mode is displayed.13) Incoming Channel and Incoming Channel
Name
The channel and the name of the channel being
received is displayed.
Category List and Channel List
eng_a439eng_a438
1) Category List This displays the category button. Touch the button
to display the channel list.2) Channel List This displays the channel button. Touch the button
to start receiving the relevant channel.3) [CAT-Scan]
This scans the channels in the currently selected
category.
SIRIUS Satellite Radio Inc. “SIRIUS” and related marks
are trademarks of SIRIUS Satellite Radio Inc.
2)
3)4)5)
6) 7) 8) 9) 10)
12) 13)
1)
1)2)3)
11 )






 


Listening to SIRIUS 6-13
Audio
Selecting Stations
1 Press the [MODE] key, and touch
[SIRIUS]
eng_a310
NOTE If SIRIUS has already been selected, the band is
switched. 2 Touch either [
Channel] or
[Channel
] to select the channel to
be received
eng_a440

The channels is changed one channel at a time.
Touch and hold one of these buttons to continuously
change the incoming channel. Release the button to
stop on a channel.
Selecting a Category to Be Received
1 Press the [MODE] key, and touch
[SIRIUS]
2 Touch [Category]
eng_a440
The category list is displayed. 3 Touch the category button
eng_a439
The list of channels within the selected category is
displayed. 4 Touch the channel button
eng_a441

The relevant channel is started to be received.
Scanning
It is possible to search for channels that
can be received in the current location.
Scanning ChannelsScan all channels. 1 Press the [MODE] key, and touch
[SIRIUS]
eng_a310
2 Touch [
]
eng_a440








Listening to MP3/WMA Disks 6-29
Audio
3 Touch [Repeat] again
REPEAT
eng_a332

FOLDER-REPEAT
eng_a333
Each time [Repeat] is touched, the playback mode
changes.
REPEAT The track currently being played plays
repeatedly.
FOLDER-
REPEATAll tracks in the folder currently being
played play repeatedly.
(OFF) Cancels the repeat playback.
Scan PlaybackThe start of each track is played for approximately 10
seconds each. Use to nd a desired track. 1 Touch [
]
eng_a328
2 Touch [Scan]
eng_a331
Scan playback is started.
3 Touch [Scan] again
SCAN
eng_a334

FOLDER-SCAN
eng_a335
Each time [Scan] is touched, the playback mode
changes.
SCAN Performs scan playback on all the tracks
in the folder currently being played.FOLDER-
SCAN
Performs scan playback on the first
track in all the folders on the disk.
(OFF) Cancels the scan playback.
4 Touch the name of the track
during playback
Scanning is stopped, and the selected track is played.NOTE Scan playback is cancelled automatically if the scan
returns to the rst track.










Listening to MP3/WMA Disks 6-30Random PlaybackThe track order can be changed and played randomly
on the MP3/WMA disk currently being played. 1 Touch [
]
eng_a328
2 Touch [Random]
eng_a331
Random playback is started.
3 Touch [Random] again
RANDOM
eng_a336

ALL-RANDOM
eng_a337
Each time [Random] is touched, the playback mode
changes.
RANDOMPerforms random playback on all the
tracks in the folder currently being
played.ALL-RANDOM
Performs random playback on all the
tracks on the disk.
(OFF) Cancels the random playback.