2010 MERCEDES-BENZ SPRINTER ECO mode

Notes on care ................................
179
Reconnecting ................................. 178
Removing/installing
......................177
Belt
see Seat belts
Bio-diesel ........................................... 153
Bi-Xenon headlamps Driving abroad ............................... 138
Brake fluid .......................................... 159
Display message ............................ 205
Fluid change .................................. 159
Fluid level ...................................... 170
Warning lamp ................................. 188
Brake lamp
Changing bulbs ......................236, 237
Brake lining
Indicator lamp ................................ 191
Brake linings
Display message ............................ 205
Brakes
ABS .................................................. 47
BAS .................................................. 48
Brake system
Fluid level ...................................... 170
Malfunction .................................... 205
Warning lamp ........................ 187, 188
Breakdown
see Flat tire
Breaking-in ......................................... 138
Bulb failure indicator .......................... 89C
Camera see Rear view camera .................... 122
Capacities

.......................................... 287
Care of the vehicle ............................ 162
Cargo tie-down ring Permissible tensile load ................. 283
Cargo tie-down rings .........................146
Installing ........................................ 148
CD player/CD changer ........................78
Center console ..................................... 26
Central locking .................................... 54
Automatic locking ............................ 55
Malfunction .................................... 217 Central locking system
see Key ............................................ 52
Troubleshooting ............................. 217
Changing bulbs .................................. 233
Display message ............................ 209
Doorway lamp ................................ 238
Exterior lighting ............................. 234
Headlamps

..................................... 234
Indicator and warning lamps .......... 197
Interior light ........................... 238, 239
Perimeter lamp .............................. 238
Tail lamp ................................ 236, 237
Chassis number
see Vehicle identification number .. 277
Child-proof locks
Rear doors ....................................... 45
Children
In the vehicle ................................... 41
Restraint systems ............................ 42
Child seat
LATCH-type (ISOFIX ) child seat
anchors ............................................ 43
Special seat belt retractor ............... 43
Top Tether ....................................... 44
Chock ................................................. 183
Cigarette lighter ................................ 129
Cleaning After driving off-road or on
construction sites ..........................165
Alloy wheels ................................... 165
Automatic car wash ....................... 164
Cleaning the engine ....................... 165
High-pressure cleaning ..................164
Vehicle exterior .............................. 162
Vehicle interior .............................. 162
Cleaning and care .............................. 162
Climate control .................................... 97
Adjusting the air vents ................... 101
Air conditioning in the rear
compartment ................................. 100
Air-conditioning system ................... 99
Air-recirculation mode ................... 104
Control panels ................................. 97
Cooling with air dehumidification ..100
Defrosting the windows ................. 103
Fogged up windows .......................103
General notes .................................. 98
Heating ............................................ 98 Index
5

Heating in the rear compartment
.....99
Rear-compartment air
conditioning ................................... 100
Rear-compartment heating ..............99
Reheat function (air
dehumidification) ........................... 103
Setting the air distribution .............102
Setting the airflow
.........................102
Setting the temperature ................ 100
Switching air-recirculation mode
in the rear compartment on/off .... 104
Switching on/off ........................... 100
Cockpit ................................................. 22
Combination switch ............................90
Consumption statistics (vehicles
with steering wheel buttons) .............85
Control panel Above the windshield ....................... 27
Conversions and accessories
see Add-on equipment
Coolant ............................................... 160
Changing ....................................... 160
Display message ............................ 206
Expansion tank .............................. 169
Level .............................................. 169
Temperature gauge (vehicles with
steering wheel buttons) ................... 77
Topping up ..................................... 169
Warning lamp ................................. 193
Cornering lamps .................................. 91
Changing bulbs .............................. 235
Cruise control .................................... 118
Display message ............................ 203
Malfunction .................................... 216
Cup holder ......................................... 132D
Daytime running lamp see Daytime running lamp mode


Daytime running lamp mode ..............89
Setting (vehicles without steering-
wheel buttons) ................................. 74
Setting (vehicles with steering
wheel buttons) ................................. 82
DEF
See Diesel Exhaust Fluid (DEF) ...... 155
Delayed switch-off .............................. 83Diesel
Consumption ................................. 140
Fuels .............................................. 153
Low outside temperatures
............. 154
Reserve fuel warning lamp

....... 72, 193
Tank capacity ................................. 287
Diesel engine
Preglow indicator lamp ..................194
Winter driving ................................ 154
Diesel Exhaust Fluid (DEF) ...............155
Capacities ...................................... 287
Consumption ................................. 140
Display message ...........199, 202, 204
Exhaust gas aftertreatment ...........116
Indicator lamp ................................ 190
Level indicator ............................... 116
Ranges ........................................... 116
Refilling .......................................... 143
Storage .......................................... 156
Tool for the tank filler cap .............. 182
Digital speedometer
Setting the unit (vehicles with
steering wheel buttons) ................... 80
Display
Display messages ..........................197
Outside temperature (vehicles
with steering wheel buttons) ............ 77
Outside temperature display
(vehicles without steering wheel
buttons) ........................................... 73
see Indicator and warning
lamps ....................................... 24, 187
Standard display (vehicles
without steering wheel buttons) ......73
Standard display (vehicles with
steering wheel buttons) ................... 77
Distance recorder ................................ 73
see Odometer .................................. 73
Door
Control panel ................................... 28
Door lock
see Central locking .......................... 54
Doors
Display message ............................ 208
Indicator lamp ................................ 197
Opening (from the inside) ................ 56
see Central locking .......................... 54
Unlocking/locking with key ............. 526
Index

Vehicle equipment
i Diese Betriebsanleitung beschreibt alle
Modelle, Serien- und
Sonderausstattungen
Ihres Fahrzeugs, die zum Zeitpunkt des
Redaktionsschlusses dieser
Betriebsanleitung erhältlich waren.
Länderspezifische Abweichungen sind
möglich. Beachten Sie, dass Ihr Fahrzeug
nicht mit allen beschriebenen Funktionen
ausgestattet sein könnte. Dies betrifft auch
sicherheitsrelevante Systeme und
Funktionen. Environmental protection
0040
Environmental note
Our declared policy is one of comprehensive
environmental protection.
Our objective is to use natural resources,
which are the basis of our existence on this
planet, sparingly and in a manner that takes
the requirements of both nature and
humanity into account.
You too can contribute to environmental
protection by operating your vehicle in an
environmentally responsible manner.
Fuel consumption and engine, transmission,
brake and tire wear depend on these two
factors:
R operating conditions of your vehicle
R your personal driving style
You can influence both factors.
Observe the following notes: Operating
conditions:
R avoid driving short distances as this
increases fuel consumption.
R make sure that the tire pressures are
always correct.
R do not carry

any unnecessary weight in/on
the vehicle.
R keep an eye on the vehicle's fuel
consumption. R
remove roof racks

once you no longer need
them.
R a regularly serviced vehicle will contribute
to environmental protection. You should
therefore adhere to the specified service
intervals.
R always have maintenance work carried out
at an authorized Sprinter Dealer.
Personal driving style:
R do not depress the accelerator pedal when
starting the engine.
R do not warm up the engine when the
vehicle is stationary.
R adopt an anticipatory style of driving and
keep a sufficient distance from other
vehicles.
R avoid frequent, sudden acceleration.
R switch off the engine in stationary traffic. Environmental concerns and
recommendations
In this manual,

whenever you see instructions
to discard materials, you should first attempt
to reclaim and recycle them. To preserve our
environment, follow appropriate
environmental rules and regulations when
disposing of materials. Operating Safety
Safety notes
G
Warning
Engine exhaust,
some of its constituents, and
certain vehicle components contain or emit
chemicals known to

the State of California to
cause cancer and birth defects or other
reproductive harm.
In addition, certain fluids contained in
vehicles, and certain products of component
wear contain chemicals known to the State of
California to cause cancer and birth defects
or other reproductive harm. 16
Introduction

Modifying the engine power output
Having the engine power output of your
vehicle increased by tampering with the
electronic engine management system will
invalidate the vehicle's general operating
permit and insurance coverage, as well as
your New Vehicle Limited Warranty and
warranty entitlement.
Modifications to the output of the engine
must be reported to the insurance provider
and require the vehicle to be recertified. The
tires, chassis, brake and cooling systems
must be adapted to the increased engine
power output.
Tampering with the electronic engine
management system modifies emission
values and it
will not be possible to guarantee
the operating safety of the engine in every
case. Increases in performance may lead to
malfunctions and consequential damage to
other assemblies.
If you sell the vehicle, failing to inform the
buyer of the modified engine power output
could constitute an offense punishable by
law, depending on the country concerned. Diesel particle filter
! If the vehicle is predominantly used for
short-distance driving, this could lead to a
malfunction in the automatic cleaning
function for the diesel particle filter. As a
result, fuel may accumulate in the engine
oil and cause engine failure.
Therefore, if you mainly drive short
distances, you should

drive on a highway or
on rural roads for 20 minutes every
310 miles (500 km). This ensures sufficient
regeneration of the diesel particle filter. Vehicle alterations
We recommend the use of genuine Sprinter
parts and conversion parts as well as accessories that have been expressly
approved for your vehicle model.
These parts have been subjected to special
tests in order to determine their safety,
reliability and suitability.
!
For safety reasons, have add-on
equipment prepared and installed
according to the

Sprinter body/equipment
mounting directives in force. These body/
equipment mounting directives guarantee
that the chassis and add-on equipment
form a cohesive whole and that the highest
possible level of operating and driving
safety is reached.
We recommend for safety reasons that:
R you carry out no other modifications to
the vehicle.
R you obtain the agreement of the
distributor named on the inside of the
front cover for any deviations from the
approved body/equipment mounting
directives.
Approval by official testing centers or
permission given by authorities do not
eliminate safety risks.
! The wooden or plastic cargo area floor
fitted at the factory is an integral
component of the vehicle structure. The
vehicle body could be damaged if you have
the load area floor removed. This then
affects the securing of loads and the
maximum loading capacity of the lashing
points is no longer guaranteed.
Therefore, do not have the load area floor
removed.
Even seemingly small changes to the vehicle,
such as attaching a radiator cover for winter
driving or as protection against insects, are
not allowed. These could cause the engine
diagnostics to register incorrect data. The
recording of engine diagnostic data is a legal
requirement, and must always be verifiable
and accurate. 18
Introduction

0046
Seat fore-and-aft adjustment
0047 Lumbar support adjustment
008A Seat backrest adjustment
0088 Seat height adjustment
0086 Seat cushion angle adjustment
0087 Seat suspension adjustment
006E Seat suspension lock
i Depending on the seat model, some
adjustments may not be available.
X To adjust the seat fore-and-aft
position: pull lever 0046 up.
X Slide the seat forwards or back until you
can depress the pedals.
X Release lever 0046.
X Slide the seat forwards or back until you
hear it engage.
X To adjust the seat backrest: turn
handwheel 008A forwards.
The seat backrest moves to a vertical
position.
X Turn handwheel 008A towards the rear.
The seat backrest tilts towards the rear.
X To adjust the seat height: press or pull
lever 0088 repeatedly
until
you have reached
the desired seat height. X
To adjust the seat cushion angle: turn
handwheel 0086 forwards.
The front of the seat cushion is lowered.
X Turn handwheel 0086 towards the rear.
The front of the seat cushion is raised.
i The lumbar
support

allows you to use the
backrest to increase the support provided
to the lumbar spine.
When the lumbar support is correctly
adjusted, it reduces strain on your back
while driving.
X To adjust the lumbar support: turn
handwheel 0047 upwards.
This increases the support provided to the
lumbar region.
X Turn handwheel 0047 down.
This reduces the support provided to the
lumbar region.
The seat suspension must be adapted to your
body weight.
Adjust

the seat suspension only
while the seat is unoccupied.
X To adjust the seat suspension: take your
weight off the seat.
X Use handwheel 0087

to select the body
weight (between 40

and 120 kg) for optimal
seat suspension.
The seat suspension will become more rigid
the higher you set the weight. It will then
not move as far.
If the seat moves up and down frequently and
to a great

extent, you can lock the seat in the
lower movement range..
X To engage the seat suspension lock:
turn handle 006E downwards.
When it next moves, the seat will lock in
position.
i The seat
suspension

lock will only engage
if your body weight equals or exceeds the
weight selected for the seat suspension.
X To release the seat suspension lock:
turn lever 006E upwards.
The seat can

now move up and down again.64
Seats
Controls

Standard display
0046
Odometer
0047 Trip meter
008A Clock
0088 Outside temperature or digital
speedometer
0086 Fuel gauge ( Y page 72)
0087 Selector lever position or current shift
range with automatic transmission
Changing the standard display
X Turn the key to position 2 in the ignition
lock.
X Press the 007B menu button for longer than
one second.
The information shown in the display
changes from the outside temperature to
the digital speedometer.
Outside temperature display G
Warning
When the temperature displayed is just above
freezing point, the road surface may be icy,
especially in wooded
areas or on bridges. The
vehicle could skid if you fail to adapt your
driving style. Always adapt your driving style
and drive at a speed to suit the prevailing
weather conditions.
Changes in outside temperature are
displayed with a slight delay. Menus
Using the 0069, 006A, 007B or 0048 adjustment
buttons, you can select the following
functions: R
calls up the service due date
(Y page 167)
R checking the engine oil level
(Y page 171)
R preselecting/setting the auxiliary heating
switch-on time ( Y page 104)
R tire pressure monitor
R setting the time (Y

page 73)
R setting the date ( Y page 73)
R setting daytime running lamp mode
(Y page 74)
X To return to the standard display: press
the 007B menu button for longer than one
second.
or
X Do not press any button for 10 seconds.
The display accepts the changed settings.
Setting the time X
Turn the key to position 2 in the ignition
lock.
X Press the 007B menu button repeatedly until
the hours figure flashes.
X Press 0069 or 006A to set the hours.
X Press reset button 0048.
The minute display flashes.
X Press 0069 or 006A to set the minutes.
i If you keep the 0069 or 006A button pressed,
the value will change continuously.
Setting the date X
Turn the key to position 2 in the ignition
lock.
X Press the 007B menu button repeatedly until
the day flashes.
X Press 0069 or 006A to set the day.
X Press reset button 0048.
The month display flashes.
X Press 0069 or 006A to set the month. On-board computer without steering wheel buttons
73
Controls Z

Using the steering wheel buttons
X
Press the 0059 or 0058 button repeatedly
until the Settings menu appears in the
display.
X Press the 0048 reset button for about three
seconds.
You will see a message in the display
prompting you to
press the 0048 reset button
again to confirm.
X Press the 0048 reset button again.
The functions of all submenus are reset to
the factory settings.
i If you do not press the 0048 reset button a
second time to confirm, the settings are
retained. The Settings menu appears
again after approximately five seconds.
For safety reasons, it is not possible to
reset all of the functions while the vehicle
is in motion. For example, the Hdlmp
mode function in the Lighting submenu
remains unchanged.
Resetting the functions of a submenu You can reset the functions of an individual
submenu to the factory settings.
Using the steering wheel buttons
X
Press the 0059 or 0058 button repeatedly
until the Settings menu appears in the
display.
X Press 0029 to switch to the submenu
selection.
X Press 005A or 005B to select a submenu.
X Press the 0048 reset button for about three
seconds.
You will see a message in the display
prompting you
to

press the 0048 reset button
again to confirm.
X Press the 0048 reset button again.
All functions of the submenu are reset to
the factory settings.
i If you do not press the 0048 reset button a
second time to confirm, the settings are retained. The Settings menu appears
again after approximately five seconds.
For safety reasons, it is not possible to
reset all of the functions while the vehicle
is in motion. For example, the Hdlmp
mode function in the
Lighting submenu
remains unchanged.
Submenus in the Settings menu Using the steering wheel buttons
X
Press the 0059 or 0058 button repeatedly
until the Settings menu appears in the
display.
X Press 0029 to switch to the submenu
selection.
You will see the collection of submenus.
There are more submenus than can be
displayed at the same time. X
Press 005A or 005B to select a submenu.
The submenu currently selected is
highlighted.
X Press 0029 to select the function within a
submenu.
X Change the setting by pressing 005A or
005B.
The changed setting is saved.
You can select the following submenus:
R Instrument cluster ( Y
page 80)
- Units and language settings
- Status bar settings
R Clock/Date (Y page 82) On-board computer with steering wheel buttons
79
Controls Z

X
Press 005A or 005B to select the
Lighting submenu.
X Press 0029 to select the Hdlmp mode
function.
The selection marker is on the current
setting. X
Press 005A or 005B to select the Manual
or Constant (daytime running
lamp mode)
setting.
i USA only:
If you turn the light switch to 006C or
0064, the corresponding light is switched
on. Daytime running lamp mode remains
activated if the light switch is turned to
005A.
Canada only:
If you turn

the light switch to 0064, the low-
beam headlamps are switched on. Daytime
running lamp mode remains activated if the
light switch is turned to 006C or 005A.
i For safety reasons, it is not possible to
reset the Hdlmp mode function to the
factory setting while the vehicle is in
motion. You will see the following message
in the display: Setting only possible
at standstill
Switching surround lighting (locator
lighting) on/off
If you switch the surround lighting to On, the
following lamps light up in the dark after you
have unlocked the vehicle using the key:
R the parking lamps
R the tail lamps
R the license plate lamps
R the fog lamp The surround lighting automatically switches
off after 40 seconds or when you:
R
open the driver's door
R insert the key into the ignition lock
R lock the vehicle using the key
Using the steering wheel buttons
X Press the 0059 or 0058 button repeatedly
until the Settings menu appears in the
display.
X Press 0029 to switch to the submenu
selection.
X Press 005A or 005B to select the
Lighting submenu.
X Press 0029 to select the Loc. lighting
function.
The selection marker is on the current
setting. X
Press 005A
or 005B
to switch the surround
lighting (locator lighting) to On or Off.
Setting the exterior lighting delayed
switch-off
The Headlamps (delayed headlamp shut-off)
function enables you to set whether and for
how long
the

exterior lighting is to remain on
in the dark after closing the doors.
If you have set the delayed switch-off and
switch off the engine, the following remain lit:
R the parking lamps
R the tail lamps
R the license plate lamps
R the fog lamp
i You can reactivate this function by
opening a door within 10 minutes.
The exterior lighting is switched off after
60 seconds if you do not open a door or if On-board computer with steering wheel buttons
83
Controls Z