2010 MERCEDES-BENZ ML450 HYBRID adding oil

A
ABS (Antilock Brake System) ............... 9
Warning lamp .............................
13, 29
Anticorrosion/antifreeze ....................39
Antilock Brake System see ABS
Automatic shift program ....................18
Automatic transmission Automatic shift program ..................18
Messages in the multifunction
display ............................................. 25
Program mode
indicator .................................... 13, 19
Program mode selector switch
(automatic shift program) ................18
Axle oils ................................................ 38B
BAS (Brake Assist System) ................... 9
Battery Charging .......................................... 32
Charging condition high-voltage
battery (COMAND) ........................... 14
Jump starting ................................... 33
Messages in the multifunction
display

............................................. 26
Safety notes ..................................... 32
see High-voltage battery
Brake Assist System
see BAS
Brakes
Warning
lamp .......................................... 13, 29
Brake system
see RBS C
Capacities and recommended
fuel/lubricants .................................... 38
Charging condition high-voltage
battery (COMAND) ...............................

14
COMAND
Charging condition high-voltage
battery ............................................. 14
Fuel consumption ............................ 15Generated electric power
................15
Overview .......................................... 13
Combustion engine
Malfunction ......................................

30
Starting ............................................ 16
Consumption statistics (COMAND) ...15
Control system Overview .......................................... 13
Coolant
Anticorrosion/antifreeze ................. 39
Capacities ........................................ 38
Cruise control ...................................... 10 D
Displays
Charging condition high-voltage
battery (COMAND) ........................... 14
Messages in the multifunction
display

............................................. 24
Driving and parking
Safety notes ..................................... 16
Driving off ............................................ 17
Driving safety systems ABS .................................................... 9
BAS .................................................... 9
RBS .................................................... 9
Driving systems
Cruise control .................................. 10
Driving tips .......................................... 17 E
Engine .............................................

16, 30
Malfunction indicator
lamp ................................................. 13
see Combustion engine
Engine oil
Adding ............................................. 22
Checking level ................................. 21
Enviromental protection ....................... 7
ESP ®
(Electronic Stability Program)
Warning lamp ............................. 13, 29 F
Fluids
Automatic transmission fluid ........... 38
Brake fluid ....................................... 384
Index 164_ZA; 2; 2, en-US
d2ureepe,
Version: 2.11.8.1 2009-05-12T15:08:04+02:00 - Seite 4

Using special additives not approved by
Mercedes-Benz may cause damage not
covered by the Mercedes-Benz Limited
Warranty.
For further information contact an
authorized Mercedes-Benz Center.
Notes on checking engine oil level
When checking the oil level the vehicle must
be parked on level ground and the vehicle
must have been stationary for at least
5 minutes with the combustion engine turned
off. Checking engine oil level
Before opening the hood do the following:
X Engage the parking brake.
X Shift the automatic transmission into park
position P.
X Switch off the ignition.
The READY indicator (Y page 16) in the
instrument cluster goes out.
X Remove the SmartKey from the starter
switch or remove the SmartKey with
KEYLESS-GO from the vehicle.
X Observe the safety notes on the danger of
electric shock in this manual.
X Open the hood, see Operator's Manual. X
Remove cover : by pulling it in direction
of arrow. X
Pull out oil dipstick ;.
X Wipe oil dipstick ; clean.
X Fully insert oil dipstick ; into the dipstick
guide tube.
X Pull out oil dipstick ; again after
approximately 3 seconds to obtain
accurate reading.
The oil level is correct when it is between
lower (min) mark ? and upper (max) mark
= of oil dipstick ;.
i The filling quantity between the upper and
lower marks on the oil dipstick is
approximately 2.1 US qt. (2.0 l).
X If necessary, add engine oil ( Y page 22).
X Install cover :.
For more information on engine oil, see
Operator's Manual. Adding engine oil 22
Operation 164_ZA; 2; 2, en-US
d2ureepe,
Version: 2.11.8.1 2009-05-12T15:08:04+02:00 - Seite 22

X
Remove the cover (Y page 22).
X Unscrew filler cap : from filler neck.
X Add engine oil as required. Be careful not
to overfill with oil.
Be careful not to spill any oil when adding.
Avoid environmental damage caused by oil
entering the ground or water.
! Excess oil must be siphoned or drained
off. It could cause damage to the engine
and emission control system not covered
by the Mercedes-Benz Limited Warranty.
X Screw filler cap : back on filler neck.
X Install the cover ( Y page 22). Operation
23164_ZA; 2; 2, en-US
d2ureepe,
Version: 2.11.8.1 2009-05-12T15:08:04+02:00 - Seite 23 Z

Model
ML 450 HYBRID Capacity Fuels, coolants,
lubricants, etc.
Air conditioning
system
— R134a refrigerant
and special
PAG lubricant oil
(never R 12)
Washer system and
headlamp cleaning
system
7.6 US qt (7.2 l) MB Windshield
Washer
Concentrate
6
, see
Operator's Manual
Washer fluid mixing
ratio,
see Operator's
Manual Approved engine oils
Use the table below to determine the
MB sheet number.
Model
ML 450 HYBRID Engine,
type MB
sheet
number
272 229.5
i
MB sheet numbers are printed on the
outside of oil containers. i
For
more information on approved engine
oils, refer to the Operator's Manual.
Coolants The engine coolant is a mixture of water and
anticorrosion/antifreeze.
The cooling system was filled at the factory
with a coolant providing freeze protection to
approximately -35‡ (-37†) and corrosion
protection.
Model
ML 450 HYBRID Approximate freeze protection
-35‡ (-37†) -49‡ (-45†)
Cooling system
5.0 US qt (4.75 l) 5.5 US qt (5.2 l)
Low temperature cooling
system
1.0 US qt (0.95 l) 1.1 US qt (1.05 l)
!
Add premixed coolant solution only.
Adding

water and MB 325.0 Anticorrosion/
Antifreeze separately from each other,
could cause engine damage not covered by
the Mercedes-Benz Limited Warranty.
i For more information on coolants, refer to
the Operator's Manual.
6 Mixed with water or commercially available premixed washer solvent/antifreeze. Technical data
39164_ZA; 2; 2, en-US
d2ureepe,
Version: 2.11.8.1 2009-05-12T15:08:04+02:00 - Seite 39 Z