2010 MERCEDES-BENZ E-Class SEDAN display

3Current vehicle location4Navigation submenu
Map without activated route guidance and with
menu system hidden
1Current vehicle location2Set map orientation3Set map scale
Displaying/Hiding Menu System
XTo hide: Slide qm and when the menu item
Full screen is displayed press n.
or
XPress the function button Ø.
The menu system is hidden. This displays
the map in full screen mode.XTo display: In full screen map mode press
n .
Setting Map Scale
i
You can only set the map scale when the
menu system is hidden (map in full-screen
mode).
XRotate ym z until the required map scale is
set.
The map scale 3 is displayed as soon as
you start rotating ym z. Rotating clockwise
makes the map smaller, rotating
anticlockwise enlarges it.1Currently set map scale as number2Pointer indicating the currently selected
map scale3Scale
Saving Current Vehicle Location as
Destination in the Last Destinations
XTo display menu system if applicable:
Press n.XTo save: Select Position £Save
Vehicle Position .
COMAND saves the current vehicle
location as destination in the last
destinations memory. A window appears
containing a corresponding message.XTo exit menu: Slide om p or press the
k button.
Scrolling the Map
i
You can only scroll the map when the
menu system is hidden (map in full-screen
mode).
XHide menu system if applicable
( Y page 54).XSlide qm r, o m p or wm x.
Crosshairs will appear on the map.54IntroductionNavigation

1Current vehicle location2Crosshairs3Information on crosshairs position4Set map scale
iThe display item 3 may for example be
a road if corresponding data is available in
the digital map and Current Street is
activated. Or it displays the geo-coordinate
position of the crosshairs if Geo-
coordinates display is activated.
Saving crosshairs position as destination
in the Last Destinations memory
XTo display menu system if applicable:
Press n.XTo save: Select Position £Save
Crosshair Position .
COMAND saves the crosshairs position as
a destination in the last destinations
memory. A window appears containing a
corresponding message.
Hiding crosshairs
XPress the k button.
The crosshairs disappear and the map is
set to the vehicle location.
or
XSet the map to the vehicle location, see
description below.Setting Map to Vehicle, Destination or
Stopover Location
i If you have moved the map, you can
quickly move the map to the vehicle,
destination or stopover location using this
function. It is only possible to set it to the
destination location when route guidance
is active.
XTo display menu system if applicable:
Press n.XTo set map to vehicle location: Select
Position £Vehicle Position Map .
This hides the crosshairs.
or
XPress the k button if the crosshairs are
displayed.
This hides the crosshairs.XTo set the destination location: Select
Position £Destination Position
Map .
The crosshairs position is then set to the
destination.XTo set the stopover location: Select
Position £Stopover Position Map .
The crosshairs position is then set to the
stopover.
Basic Settings
You can perform the settings listed below
with route guidance inactive or active.
Route Mode
This function allows you to set the following
route calculation modes and options for route
guidance:
R Short Route
COMAND calculates a route by minimizing
the driving distance without taking into
acount traffic messages.
R Dynamic Route
Introduction55NavigationZ

COMAND calculates a route by minimizing
the driving time and takes into account
traffic messages received along the route.
The navigation system thus can avoid
traffic jams by recalculating the route
dynamically.
R Dynamic Route Only After Request
Same as Dynamic Route with the
exception that a message appears asking
you whether you want to allow the
rerouting or not.
R Fast Route
COMAND calculates a route by minimizing
the driving time without taking into acount
traffic messages.
R Avoid Highways
R Avoid Toll Roads
R Avoid Tunnels
R Avoid Ferries
R Avoid AutoTrains1Route calculation mode;Route options
Setting Route Calculation Mode
XDisplay menu system if applicable
( Y page 54).XSelect Navi £ Mode .XSelect Short Route , Dynamic Route ,
Dynamic Route Only After Request or
Fast Route .XTo exit menu: Slide om p.Setting Route OptionsXDisplay menu system if applicable
( Y page 54).XSelect Navi £ Mode .XTo switch route option on/off: Select
required option.
Depending on the previous status, the
option will be switched on Ç or off c.
You may activate several options.
i The calculated route may include ferry
connections, for example, even if the
operation Avoid Ferries has been
activated.
i If you change the route mode setting
when route guidance is active, COMAND
calculates a new route.
Map Display
Map Orientation
1Currently set map orientation
The following displays are possible:
R 9 = orientation to north (the map display
is oriented to the north, north is always at
the top)
R 8 = Driving direction (the map display is
oriented in the direction of travel, the
direction of travel is always at the top, the
orange tip of the symbol points
northwards)
R 8 = Bird's-eye view
( the map display is oriented in the direction
of travel, the map projection reproduces
the curvature of the earth's surface, the
orange tip of the symbol points
northwards)
56IntroductionNavigation

Example of map from bird's-eye view
1Current crosshairs location2Currently set map orientationXTo set map orientation: Display menu
system if applicable ( Y page 56).XSelect Navi£Map Display .
A dot R indicates the current setting.1Options for map orientationXSelect North Up or Heading Up or
Bird's-eye View .XTo exit menu: Slide om p.XHide menu systems if applicable
( Y page 54).
The map orientation changes accordingly.
Setting POI Symbols
You can select which POIs are to be displayed
as symbols on the map. Points of interests
include, for example, gas station, hotels,
cinemas and restaurants.
1Options for POI symbols ( Y page 57).XTo set: Display menu system if applicable
( Y page 54).XSelect Navi£POI Symbols On Map .XSelect Standard Symbols or Personal
Symbols or No Symbols .
The settings have the following effect:
R Standard Symbols
Displays the factory-set symbols
R Personal Symbols
The list of POIs is displayed
XTo switch symbol display on/off:
Select the corresponding POI.
Depending on the previous status, the
corresponding symbol displays will be
switched on Ç or off c. You may
also activate the symbol displays for
several POIs.
R No Symbols
No POI symbols are shown on the map.
i The list indicates all symbols for all
countries that are contained in the digital
map. However, not all POIs are availbale in
all countries. As a result, certain POI
symbols may not be shown on the map
even though the symbol display is switched
on.
XTo exit menu: Slide om p.XHide menu system if applicable
( Y page 54).Introduction57NavigationZ

Traffic Information on Map
Provided you have a subscription to SIRIUS
XM Satellite Radio Traffic Message Service,
you can have the traffic information displayed
on the map. There are three different
categories of information you can select.
R Incidents
Road sections marked by a yellow line =
with arrows: traffic slowdown possible due
to incidents (e.g. road work)
R Speed and Flow
Road sections marked by yellow or red
cars :.
Yellow cars: Traffic congestion, average
speed 25 – 45 mph.
Red cars: Traffic congestion, average
speed 5 – 20 mph.
R Free Flow
Road sections marked by a green line with
arrows ;: free flow of traffic.
1Speed and Flow2Free Flow3Incidents
Text Information on Map
You can have map information displayed at
the bottom edge of the screen. By default the
map information is set to Arrival Time/
Distance .
XTo set: Display menu system if applicable
( Y page 54).XSelect Navi£Text Information On
Map .
A dot R indicates the current setting.
XSelect Arrival Time/Distance or
Current Street or Geo-coordinates or
None .XTo exit menu: Slide om p.XHide menu system if applicable
( Y page 54).58IntroductionNavigation

Time of Arrival/Distance to Destination
Map with display activated for time of arrival/
distance
1Symbol for destination2Distance to the destination3Symbol for estimated time of arrival4Estimated time of arrival
i This display can only be seen during route
guidance. In the Scroll Map function you
will see other data depending on the
crosshairs position, for example a street
name if the digital map supports this data.
Current Street
Map with road display activated
1Road name or road number, e.g. for
highways
Geo-Coordinates Display
Map with geo-coordinates display activated
1Current, rounded height above sea level2Coordinates display of the current vehicle
location (latitude)3Coordinates display of the current vehicle
location (longitude)4Number of visible GPS satellites.
i Adequate GPS reception must be
available for all displays. The altitude
display 1 may differ from actual altitude
because the navigation system calculates
it using the GPS signals.
i In the Scroll Map function the display
1 and 4 are not displayed.
“None” Menu Option
Map with display switched off
1Currently set map orientation
i In the Scroll Map function you will see
other data depending on crosshairs
position, for example a road name if the
digital map supports this data.
Topographic Map
You can have the map display enhanced with
topographic features (e.g. mountain ranges,
coloration based on relief information).
XTo set: Display menu system if applicable
( Y page 54).XSelect Navi£Topographic Map .
Depending on the previous status, the
function will be switched off cor on Ç.
Highway Information
When driving on highways, you can have the
next gas stations, service areas, etc. as well
as the distance to them displayed in the right-
hand half of the screen.
Introduction59NavigationZ

XTo set: Display menu system if applicable
( Y page 54).XSelect Navi£Highway Information .
Depending on the previous status, the
function will be switched off cor on Ç.
Example display: Function on
1Available points of interest2Name of rest area or exit number3Distance from the current vehicle location
Read Traffic Messages Automatically
You can choose whether the traffic messages
relevant for the route are read automatically
or whether you have to start the reading
manually using the Traffic submenu.
XTo set: Display menu system if applicable
( Y page 54).XSelect Navi£Read Traffic Messages
Automatically .
Depending on the previous status, the
function will be switched off cor on Ç.
Audio Fadeout
The Audio Fadeout function, if activated,
lowers the volume of the current audio source
when a navigation announcement is issued.
As soon as the navigation announcement has
ended, the audio source will be played with
the previous volume.
XTo activate: Display menu system if
applicable ( Y page 54).XSelect Navi£Audio Fadeout .
Depending on the previous status, the
function will be switched off cor on Ç.
Block Area
You can define an area within the map display
that is not to be used by the system in
calculating a route, if possible.
i The calculated route may include a
blocked area if the destination is within a
blocked area or if the destination can only
be reached using roads that lead through a
blocked area. Highways cannot be blocked.
XTo set, change or delete: Display menu
system if applicable ( Y page 54).XSelect Navi £ Block Area .
If no areas were previously set, the map
display appears ready to select an area. If
areas were previously set, the blocked area
list appears.XTo set the map scale: Rotate ym z.X To scroll the map: Slide qm r, o m p or
w m x.XTo define the center of the block area:
Press n.
The blocked area appears in red.
60IntroductionNavigation

XTo change the size of the block area:
Rotate ym z.XTo confirm the area and exit map
display: Press n.
The area is added to the block area list.
A checked entry indicates an active block
area.
i You can block several areas for the route
calculation and activate or de-activate
them by setting or removing the check
mark.
Displaying and Changing an Existing
Block Area
XTo select the area you want to display
or change: Slide qm r.XSelect Options £Display/Change .
The map display appears with the block
area marked red.XTo set the map scale: Rotate ym z.X To scroll the map: Slide qm r, o m p or
w m x.XTo define the center of the block area:
Press n.XTo set the desired size of the block area:
Rotate ym z.XTo confirm the area and exit map
display: Press n.XHide menu system if applicable
( Y page 54).Defining a New Block AreaXSelect Options £Avoid New Area
The map is displayed.XTo set the map scale: Rotate ym z.XRotate ym z until the desired size of the
new block area is set.XSlide qm r, o m p or wm x to shift the new
block area to the desired region.XTo confirm the area and exit map
display: Press n.XHide menu system if applicable
( Y page 54).
Deleting a Block Area
XTo select the area you want to delete:
Slide qm r.XSelect Options £Delete .
You will be prompted to confirm that you
wish to delete the block area.XSelect Yes or No.
If you select Yes COMAND deletes the
entry.
SIRIUS XM Traffic Service
You can display the SIRIUS XM Service
information.
XTo display the SIRIUS XM service
information: Select Navi£SIRIUS
ServiceIntroduction61NavigationZ