2010 MERCEDES-BENZ E-CLASS CABRIOLET oil temperature

Menu (on-boar
dcomputer )............ 200
Transmission output (maximum ).... 311
Mobile telephone
seeM obile phone .......................... 254
Modifying the programming
Key .................................................. 67
MOExtende drun-flat system ...........284
MP3 Operating (on-bo ardc omputer )..... 200
se es eparat eoperating instructions
Multicontour seat ................................ 96
Multifuncti ondisplay ........................ 194
Multifuncti onsteering wheel
Operating the on-board computer .193
Overview .......................................... 26N
Navigation On-bo ardc omputer ....................... 198
se es eparat eoperating instructions
Neck level heating
see AIRSCARF
NECK-PRO hea drestraints
Operation ........................................ .39
Resetting after being triggered ........40
Note sonr unnin ginan ew vehicle ..134 O
Occupant safety Children in the vehicle .....................44
Important safety gu idelines ............. 32
Octan enumbe r(fuel) ........................ 314
Odometer ........................................... 197
Oil seeE ngine oil
On-b oard computer
Assistance menu ........................... 202
Aud iomen u................................... 199
Convenience su bmenu .................. 208
Display message s.......................... 210
Factory settings ............................. 209
Important safety notes ..................192
Instrumen tcluster submenu ..........204
Lig ht subm enu............................... 205
Menu overview .............................. 196
Mess agem emor y.......................... 210Navigation menu
............................ 198
Operating the TV ............................ 200
Operating vid eoDVD ..................... 200
Operatio n....................................... 193
Service menu ................................. 204
Setting smenu ............................... 204
Standard di splays ubmenu ............ 197
Te lephon emenu ............................ 200
Time/Date su bmenu ..................... 205
Tri pm enu ...................................... 197
Veh icle submenu ........................... 207
Operatin gsyst em
se eO n-board computer
Outside temperature
Disp lay. .......................................... 193
Ov erhead control panel
Overview .......................................... 29
Ov erride feature
Rea rside windows ........................... 54 P
Pai nt code .......................................... 312
Pai ntwork (cleaning instructions) ...265
Pan orama sl iding sunroof
Opening/closing .............................. 88
Rain closing feat ure. ........................ 88
Resetting ......................................... 89
Park Assist
Parking Guid ance ........................... 177
Parking ............................................... 153
Parking aid PARKTRONIC ................................. 174
Revers ingc amera .......................... 180
Parking brake .................................... 153
Parking Guidan ce.............................. 177
Display message ............................ 226
Traile rtowing ................................. 180
Parking lamp (di splay message) ......220
Parking lock Releasing manually (automatic
transmission) ................................. 148
Parking pos ition
Exterior mirror on the front-
passenger sid e............................... 102
PARKTRONIC ...................................... 174
Activating/deactivating .................176
Ma lfunction ...... ............................. .177 12
Index BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 12

engin
edamage and damage to the exhaust
system.
Do not use the following:
R marine diesel
R heating oil
R bio-diesel
R vegetable oil
R petrol
R paraffin
R kerosene
Do not mix these fuels with diese lfuels and
do not use any special additives. Other-
wise, this can lead to damage to the engine.
This excludes flow improver ,see "Low out-
side temperatures".
! When refuellin gusing afuel can, use afil-
ter or use aclean clot hasafilter. Other-
wise, particles from the fuel can may block
the fuel lines and/or the diesel injection
system.
For further information on "Fuel", see
(Y page 313).
Low outsid etemperatures Diesel fuel with improved cold flow qualities
is available during the winter months. In
Europe, various climate-dependent low-tem-
perature classes are defined in EN 590. Refu-
elling with diesel fuel which complies with the
climatic specification sofstandard EN 590
can hel ptoprevent operatin gproblems. At
exceptionall ylow tempera tures, it is possible
that the flow properties of the fuel ma ybe
inadequate. This is also the case for fuel that
has not been adapted to the climatic specifi-
cations ,e.g. diese lfuel for warmer areas.
i Further information about country-spe-
cific fuel properties can be obtained from
oil companies, e.g. at filling stations.
Flow improver Flow improvers can be added to improve the
cold resistance of diesel fuel. The effective- ness of
aflow improver is not guaranteed with
every fuel.
Correc tdosage and thorough mixing ar edeci-
sive factor sinensuring improvement in low-
temperature resistance. Under certain cir-
cumstances, an excessive dosage may
actually decreas elow-temperatur eresist-
anc eand should therefor ebeavoided. Follow
th em anufacturer's dosing instructions.
Mix the additive with the diese ling ood time,
befor ethe flo wproperties of th ediesel
become inadequate. Malfunction scan other-
wise only be rectified by heating the entire
fuel system, e.g. by parking the vehicle in a
heated garage.
Observe the information provided by the man-
ufacturer when using aflow improver. Only
use flow improvers that have been tested and
approved by Mercedes-Benz. You can obtain
further infor mation from any Mercedes-Benz
Servic eCentre. Refuelling
Fuel filler flap The fuel filler fla
pisunlocke dorlockedauto-
matically when you open or close the vehicle
with the key or using KEYLESS-GO.
The position of the fuel filler flap is to the rear
on the right. The position of the fuel filler cap
is displayed in the instrument cluster 8.
The arrow next to the filling pump indicates
the side of the vehicle. 150
RefuellingDrivin
gand pa rking
BA 20 7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 150

X
Pull release lever :on the bonnet.
The bonnet is released.
! Make sure that the windscreen wiper sare
not folde daway from the windscreen .Oth-
erwise, yo ucould damage the windscreen
wipers or the bonnet. X
Reach int othe gap, pull bonnet catch han-
dle ;up and lift the bonnet.
Closin gthe bonnet G
Ris
kofi njury
Make sure tha tnobody can becom etrapped
as you close th ebonnet.
X Lower the bonnet and let it fal lfrom a
height of approximatel y20c m.
X Check that th ebonnet has engaged prop-
erly.
If the bonnet can be raised slightly ,itisn ot
properly engaged. Open it again and close
it with alittle more force. Engine oil
Notes on the oil level Depending on drivin
gstyle, the vehicle con-
sumes amaximum of 0.8 loil per 100 0km.
Th eo il consumption may be higher than this
when the vehicle is new or if you frequently
drive at high engine speeds.
When checking the oil level:
R park the vehicle on alevel surface.
R the engine should be switched off for at
least fiv eminutes if the engine is at normal
operating temperature.
R the engine should be switched off for at
least thirt yminutes if the engine is not at
normal operating temperature, e.g. if the
engine was only started briefly.
Checking the oil level using the oil dip-
stick Depending on the engine, the oil dipstick may
be installed at
adifferent location. E3
50 (example)
X Pull oi ldipstick :out of the oil dipstick
tube.
X Wipe off oil dipstick :.
X Slowly insert oil dipstick :into the oil dip-
stick tube to the stop, and take it out again.
The oil level is correc tifthe level is between
MIN mark =and MAX mark ;.
X Top up the oil if necessary. 260
Engine compartmentMaintenance and care
BA 20
7ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 260

Adding engine oil
H
Environmenta
lnote
When toppin guptheoil, tak ecaren ot to spill
any .Ifo il enter sthe soil or waterways, it is
harmful to the environmen t.Engine oil cap (example)
X
Turn cap :anti-clockwise and remove it.
X Top up with the amount of oil required.
Fill carefully to the maximum mark on the oil
dipstick.
i Depending on the engine, the difference
between the minimum mark and the maxi-
mum mark is approximately 1.5 –2litres.
! Do not add too muc hoil. If the oil level is
above the "max "mark on the dipstick, too
much oil has been added. This can lead to
damage to the engine or the catalytic con-
verter .Have excess oil siphoned off.
Further information on engin eoil
(Y page 315).
X Replac ecap : on the filler nec kand
tighten clockwise.
Ensure that the cap locks int oplace
securely. Checking and addin
gother service
products
Checking th ecoolan tlevel Only check th
ecoolant leve lwhen th evehicle
is on alevel surface and th eengine has cooled
dow n.
X Tur nthe ke ytop osition 2(Y page 135) in
th ei gnitio nlock.
On vehicles with KEYLESS -GO, press the
Star t/Stop butto ntwice (Y page 135).
X Check the coolant temperature display in
the instrument cluster. G
Risk of injury
The cooling system is pressurised. Therefore,
only unscrew the cap once the engine has
cooled down. The coolant temperature gauge
must display less than 70 †.Otherwi se,you
could be scalded if ho tcoolant escapes. X
Slowl yturn cap :half aturna nti-clock-
wis eand allo wexcess pressure to escape.
X Turn cap :further anti-clockwis eand
remove it.
If the coolant is at the level of marker bar
= in the filler neck when cold, ther eis
enough coolan tincoolant expansion
tank ;.
If the coolant is approximately 1. 5cm
higher when it is warm, ther eisenough
coolant in coolant expansion tank ;. Engin
ecompartment
261Maintenance and care
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 261 Z

Vehicl
emodel Replacement
amou nt with oil fil-
ter E2
00 CGI 60
E2 50 CGI 60 5.5 l
E2
20 CDI 60
E2 50 CDI 60 6.5 l
E3
5061
E3 50 CGI 60
E3 50 CDI 60 8.0 l
E5
00 8.5 l
Lubricant additives
!
Do not mix any lubrican tadditives with
the engin eoil. This could damage the
engine. Damage resultin gfrom th euse of
suc hlubricant additives in the engine oil is
not covered by the Mercedes-Benz implied
warranty.
Engin eoil viscosity Viscosit
ydescribes the flow characteristics
of afluid. If an engin eoil has ahigh viscosity,
this means that it is thick; alow viscosity
means that it is thin.
Selec tthe SA Eclassification (viscosity )ofthe
engine oil accordi ngto the outside tempera-
ture. The followin gtable shows you the vis-
cosity classes to be used depending on the
average air temperature. Brake fluid
G
Risk of accident
The brak efluid constantly absorbs moisture
fro mt he air ;this lower sits boiling point.
If the boiling point of the brake fluid is too low,
vapour pockets may form in the brake system
when the brakes are applied hard (e.g. when
driving downhill). Thi swould impair braking
efficiency.
You should have the brake fluid renewed at
regular intervals. The brake fluid change inter-
val sc an be found in the Service Booklet.
Only use brake fluid approved by Mercedes-
Benz .Information abou tapproved brak eflu-
ids can be obtained from any Mercedes-Benz
Service Centre.
i There is usually anotic eint he engine
compartmen ttoremin dyou when the next
brake fluid change is due.
60 BlueEF FICIENCY
61 Only for certain countries. 316
Service products and capacitiesTechnical data
BA 20
7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 316

Coolant
Important safety notes The coolan
tisamixture of water and anti-
freeze/corrosio ninhibitor. It performs the
following tasks:
R anti-corrosio nprotection
R antifreeze protection
R raising th eboiling point
i When the vehicle is first delivered, it is fil-
led with acoolant mixtur ethat ensures
adequate antifreeze and corrosion protec-
tion.
! Only top up with coolant that has been
premixed with the desired antifreeze pro-
tec tion. You coul dotherwis edamage the
engine.
Further information on coolants and on fill-
ing can be found in the Mercedes-Benz
Specifications for Service Products, MB
Approval 310.1 ,e.g. on the Internet at
http ://bevo.mercedes-benz.com .You can
also consult aMercedes-Benz Service
Centre.
! Alway suseasuitable coolant mixture,
even in countries where high temperatures
prevail.
Otherwise, the cooling system will not be
sufficiently protected from corrosion, and
the boiling point will be too low.
If antifreeze/corrosio ninhibitor is present in
the correc tconcentration, the boilin gpoint of
the coolant will be around 13 0†.
The antifreeze/ corrosion inhibitor con centra-
tion in the cooling system should:
R be at leas t50%. This wil lprotect the cooling
system against freezing down to around
37 †.
R not exceed 55% (antifreeze protection
down to -45 †); otherwise ,heat will not be
dissipated as effectively. If the vehicle has lost coolant, top it up with
equal amounts of water and antifreeze/cor-
rosion inhibitor. Mercedes-Ben
zrecom-
mends an anti freeze/cor rosion inhibitor
whic hhas been approved for Mercedes -Benz.
! The coolin gsystem is filled with coolant
which must be renewed after 15 years, or
after 250,000 km at the latest.
The warrant yisonly valid if you top up with
an antifreeze /corrosion inhibitor which
has been approved by Mercedes-Ben zand
if the recommend edmixt urer atio is
obser ved. Vehicl
edata Vehicle data,
E200 CG IBlueEFFI-
CIENCY Vehicle dimensions
Vehicle length (ECE)
Coupé
4698 mm
Cabri
olet 469
8mm Vehicle width including exterio
rmirrors Coupé
20
28 mm Cabriolet
201
5mm Vehicle height
62 Coupé
139
3mm Cabriolet
140
2mm Wheelbase
Coupé
276
0mm Cabriolet
276
0mm 62
Thev alues specified may diffe rfrom the actual values ,depending on the tyres, load, optional equipment
and the state of the suspension. Vehicl
edata
317Technical data
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 317 Z