Do not start the engine at any time whil
ethe
whee lisbeing changed.
Do not li eunder the vehicl ewheniti sbeing
supporte dbythe jack. If you do not raise the
vehicle as described, it could slip off the jack
(e.g. if the engine is started or adoorort he
boot lid is opene dorclosed)and seriously
injure you. G
Ris
kofa ccident
If you fail to position the jac kcorrectly, the
vehicle may:
R slip off th ejack
R injure you or others
R be damaged.
Therefore, mak esure that the jac kisposi-
tioned correc tlyint he respective jacking
points. Before positionin gthe jack, remove
any dir tthat ma yhave collected in the jacking
points. Please note that you must positio nthe
jac kint he openin gofthe jackin gpoint. X
Usin gwheel wrench :,loosen the bolts on
the wheel you wish to change by about one
full turn. Do not unscrew th ebolts com-
pletely.
The jacking points for the jack are located
behind the whee lhousings of the front wheels
and in front of the whee lhousings of the rear
wheels (arrows). Jackin
gpoints for the jack (examp le,C oupé)
AMG vehicles an dvehicles with AMG
equipment: the vehicle has covers fitted next
to the jackin gpoints on th eouter sills to pro-
tec tthe vehicle body. X
AM Gvehicles and vehicle swith AMG
equipment: fold cover;upwards. X
Position jack ?at jackin gpoint =. 282
Flat ty
reBreakdown assistance
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafaV ersion: 3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 282
