2010 MERCEDES-BENZ E-CLASS CABRIOLET brake pads

Vehicl
eequipment
i Thismanua ldesc ribe sallthe standard
and optional equipment of your vehicle
which wa savailable at th etime of pur-
chase. Countr y-specif ic differences are
possible. Bear in mind tha tyour vehicle
ma ynot featur eall function sdescribed
here. Running-in notes
Important safet
yinstructions G
Risk of accident
New brake pads/lini ngso nly have optimal
braking performance after several hundred
kilome tres. Un tilt hen ,compensate for this by
applying greater force to the brake pedal. This
also applies when brake pads/linings or
brake discs have been changed. Th
ef irst 1500 km
The mor eyou look after the engin ewhen it is
new, the happier you will be with its perform-
anc eint he future.
R Therefore, drive at varying speeds and
engin espeeds for the first 1500 km.
R Avoi doverstrainin gthe vehicle during this
period, e.g. drivin gatfull throttle.
R Change gear in good time, at the latest
when the rev counter needle is 2
/ 3 of the
way to the red area in the rev counter dis-
play.
R Do not manually shift to alower gear to
brake the vehicle.
Vehicles with automatic transmission:
R If possible, do not depress the accelerator
pedal past the point of resistanc e(kick-
down).
R Only select shift ranges 3,2or 1whe ndriv-
ing slowly, e.g .inmountainou sterrain. Af
ter1 500 km, you may gradually bring the
vehicl euptof ull road and engine speeds.
i Also observe these running-in notes when
the vehicle's engine, front-axle transmis-
sion or differential have been replaced. Driving
Important safety notes
G
Risk of accident
Do not place any objects in the driver' sfoot-
well. If you use afloormat or carpet in the
driver's footwell, make sure that it is correctly
secured and that there is sufficient clearance
for the pedals.
Do not place several floormats on top of one
another.
Loose object sorthe floormats coul dother-
wise get caught between the pedals if you
accelerate or brake suddenly. You will then
not be able to brake, declutch or accelerate
as intended. Thi scould lead to accident sand
injury. G
Risk of accident
Do not chang edown for additional engine
brakin gonas lippery road surface. This could
cause the drive wheels to lose their grip and
the vehicle could skid. This could cause you
to lose control of your vehicle and cause an
accident.
! Warm up the engine quickly. Do not use
the engine's full performanc euntil it has
reache doperating temperature.
Only set the automatic transmission to the
respective driv eposition swhen the vehicle
is stationary.
Where possible, avoid spinnin gthe drive
wheels when pulling away on slippery
roads. Otherwise, you could damage the
drive train. 134
DrivingDriving and pa
rking
BA 20 7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 134

Heav
yand light loads G
Risk of accident
Never depr esst he brake pedal continuously
while the vehicle is in motion ,e.g. never cause
the brakes to rub by applying cons tant slight
pedal pressure. Thi scauses the brake system
to overheat, increases the braking distance
and can lead to the brakes failing completely.
If the brakes have been subjected to aheavy
load, do not stop the vehicle immediately ,but
drive on for ashort while. This allow sthe air-
flo wtoc ool the brakes mor equickly.
If the brakes have been used only moderately,
you should occasionally test their effective-
ness. To do this, brake more firmly from a
higher speed. This improves the grip of the
brakes.
Wet roads If driving in heavy rain for
aprolonged period
of time without braking, there may be a
delayed reaction from th ebrake swhen brak-
ing for the first time. This ma yalso occur after
the vehicle has been washed.
You have to depress the brake pedal more
firmly. Maintain agreater distance from the
vehicl einfront.
After driving on awet road or havin gthe vehi-
cle washed, brake firml ywhile paying atten-
tion to the traffic conditions. This will warm
up the brake discs, thereby drying them more
quickly and protecting them against corro-
sion.
Limited braking perfo rmance on salt
treated roads G
Risk of accident
The layer of salt on the brake discs and the
brake pads/linings may cause adelay in the
braking effect ,resultin ginas ignifican tlyl on-
ger brakin gdistance, which could lead to an
accident.
To avoid this danger, you should: R
occasionally brake carefully, without put-
ting other road users at risk, when you are
drivin gons alted roads. This helps to
remove any salt that may have started to
build up on the brake discs and the brake
pads/linings.
R maintain agreater distance to th evehicle
ahead and driv ewith particular care.
R carefully apply the brakes at the end of a
trip and immediately after commencing a
new trip, so that salt residues are removed
from the brake discs.
New brake pads/linin gs G
Risk of accident
New brake pads/lining sonly reach thei ropti-
mum braking effect after severa lhundred kil-
ometres of driving. Before this optimum brak-
ing effect is reached, you should compensate
for the reduced braking effect by applying
greater pressure when braking. This also
applies after the brake discs or the brake
pads/lining shave been replaced.
For safety reasons, Mercedes-Benz recom-
mends that you only have brake pads/linings
fitted to your vehicle which have been
approved for Mercedes-Benz vehicles or
which correspond to an equivalent quality
standard. Brake pads/lining swhich hav enot
been approved for Mercedes-Benz vehicles or
which ar enot of an equivalent quality could
affect your vehicle' soperating safety. Ty
re traction G
Risk of accident
Whil ethe vehicle can be fully con trolled at a
cer tain speed on dry roads, you must reduce
your speed on wet or icy roads to achieve the
same road safety. Otherwise, you could cause
an accident.
Pay particular attention to the road conditions
at temperatures around freezin gpoint. Driving tips
155Driving and parking
BA 207ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 155 Z

The ASSYST PLU
Sservice interval display
does not take into account any periods of
tim eduring which the battery is disconnec-
ted.
Maintaining the time-dependent service
schedule:
X Note down the service due date displayed
in the multifunction display before discon-
necting the battery.
or
X Subtract the battery disconnection periods
from the service date shown on the display
after reconnecting the battery.
Hiding the service message X
Press %ora on the steering wheel.
Displaying the service message X
Switc hont he ignition.
X Press =or; to selec tthe Service
men uont he steerin gwheel.
X Press 9or: to selec tthe ASSYST
PLUS submenu and press ato con firm.
Th es ervice due date appear sint he multi-
func tion display.
Please bear th efollowing in mind Aq
ualified specialist workshop, e.g. a
Mercedes-Ben zService Cent re,w ill reset the
ASSYST PLU Sservic einterval display after
the necessary service work has bee ncarried
out.
You can obtain further information ,e.g.
regarding servic ework,from aMercedes-
Ben zService Cent reor directly from
Mercedes-Ben z.
! If th eASSYST PLU Sservic einterval indi-
cator has bee ninadvertently reset, this set-
ting can be corrected at aMercedes-Benz
Ser vice Centre.
Have the servic ework carried out as descri-
bed in the Ser vice Boo klet. There may oth-
erwise be inc reased wear, resulting in dam- age to the vehicle or to the major assem-
blies. Care
Notes on care
Regular care of your vehicle is acondition for
retaining the quality in the long ter m.
Use car eproducts and cleaning agent srec-
ommended and approved by Mercedes-Benz.
! For cleanin gyour vehicle, do not use any
of the following:
R dry ,rough or hard cloths
R abrasiv ecleanin gagents
R solven ts
R cleaning agents containing solvents
Do not scrub.
Do not touch the surface sorprotective
films with hard objects ,e.g. aring or ice
scraper .You coul dotherwise scratch or
damage the surfaces and protective film. H
Environmental note
Dispose of empty packaging and cleaning
cloths in an environmentally respo nsible man-
ner.
! Do not park up your vehicle for alonger
period immediately after cleanin git, espe-
cially not after cleaning the whee lrims with
wheel rim cleanin gagent. Wheel rim clean-
ing agent scan increase corrosio nofbrake
discs and brake pads .Generally speaking,
you should not park the vehicle after clean-
ing until you have run it at regula roperating
temperature. Exterior care
Automatic car wash G
Risk of accident
Braking efficiency is reduced after washing
the vehicle. This could cause an accident. For Care
263Maintenance and care
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 263 Z

thi
sreason, following acar wash, drive with
particular care unti lthe brakes are dry. G
Risk of accident
Th ev ehicle is braked when th eHOLDfunction
or DISTRONI CPLUSisa ctivated. Therefore,
dea ctivate th eHOLD function and DISTRONIC
PLU Sbefor ethe vehicle is washed in an auto-
matic car wash.
You can wash the vehicle in an automatic car
wash from the ver ystart.
! We recommend automatic car washes
with an adjustable 40
high-pressure pre-
cleaning program. In car washes that use
hig hw ater pressures, there is adanger that
as mall quantity of water may leak int othe
vehicle.
! Cabriolet: do not treat the vehicle with
hot wax under any circumstan ces.
! Cabriolet: pull the key out of the ignition
lock when washing the vehicle .This
ensures that the win ddeflector on the
windscreen is retracted. The wind deflector
may otherwise be damaged.
If the vehicle is ver ydirty, pre-wash it before
cleaning it in an automatic car wash.
! In car washes with atowing mechanism,
make sure that the automatic transmission
is in transmission position N,otherwis ethe
vehicle could be damaged.
! Make sur ethat the side windows ar ecom-
pletel yclosed, that the ventilation/heater
blowe risfully turned off and that the wind-
screen wiper switch is set to 0.Otherwi se,
the rain/light senso rmay be activated, trig-
gering unintended wiper movemen ts.T his
could cau se damage to the vehicle.
After using an automatic car wash, wip eoff
wax from th ewindscreen and the wiper
blades. This will prevent smears and reduce
wiping noises caused by residue on the wind-
screen. High-pressur
ecleaners G
Risk of accident
Do not use high-pressur ecleaners with circu-
lar-jet nozzles (dirt grinders) to clean your
vehicle, in particular the tyres. You could oth-
erwise damage the tyres and cause an acci-
dent.
! Always maintain adistance of at least
30 cm between the vehicle and the high-
pressure cleaner nozzle. Information about
the correct distance is available from the
equipment manufacturer.
Move the high-pressure cleaner nozzle
around when cleaning your vehicle.
Do not aim directly at any of the following:
R tyres
R door joint
R soft top (Cabriolet)
R wind deflector net (Cabriolet)
R electrical components
R battery
R connectors
R lights
R seals
R trim elements
R ventilation slots
Damaged seals or electrical components
can lead to leaks or failures.
Cleanin gthe whee ls !
Do not use acidic whee lcleaning products
to remov ebrake dust .This could damage
wheel bolts and brake componen ts.
! Do not park up the vehicle for an extended
perio dstraight after cleaning it, particularly
after having cleaned the wheels with wheel
cleaner. Wheel cleaners could cause
increased corrosio nofthe brake discs and
brake pads/linings. For this reason, you
should drive for afew minutes after clean-
ing. Brakin gheats the brak ediscs and
40 In accordance with the specification sfor Cabriolet programs. 264
CareMaintenance and care
BA 20
7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 264

brak
epads, thus drying them .The vehicle
can then be parked up.
Cleaning th epaintwork Scratches, corrosive deposits, area
saffected
by corrosion and damage caused by inade-
quate care canno talways be completely
repaired. In such cases, visit aqualified spe-
cialist worksho pimmediately, e.g .a
Mercedes-Ben zService Centre.
X Remov eimpurities immediately, where
possible ,whilst avoidin grubbing too hard.
X Soak insect remains with insect remover
and rinse off the treated areas afterwards.
X Soak bird droppings with water and rinse
off the treated areas afterwards.
X Remove coolant, brake fluid, tree resin,
oils ,fuels and greases by rubbing gently
with acloth soaked in petroleum ether or
lighter fluid.
X Use tar remover to remov etar stains.
X Use silicone remover to remove wax.
! Do not affix:
R stickers
R films
R magnetic plates or similar items
to painted surfaces. You could otherwise
damage the paintwork.
Care and treatment of mat tpaintwork If you
rvehicle has aclear matt finish, observe
the following instruc tions in order to avoid
damage to the paintwor kdue to incorrect
care.
! Under no circumstances should you pol-
ish the vehicle. Polishing will make the
paintwork shine.
! Do not use paintwork cleaner, grinding or
polishing products or glos spreservers such
as wax .These product sare onl ysuitable for
high-glos ssurfaces. Using them on vehi-
cles with matt paintwork can cause severe damage to the surface (shiny, mottled
patches).
Always have paintwork repairs performed
at
aq ualified specialist workshop, e.g. a
Mercedes-Ben zService Centre.
! Do not use wash programs with ahot wax
treatmen tunder any circumstances.
i Use only insect remover and car shampoo
from the range of recommended and
approved Mercedes-Be nz care products.
Cleanin gthe cabriolet soft top X
Light soiling: you can clean the sof ttop
whil eitisd ry or rinse it with clear water.
X Norma ltoheavy soiling: clean theroof
wit hab rush and clear water. Clean stains
and othe rdirt wit habrush and aMercedes-
Ben zrecom mended and approved cleani ng
agent. Always brush from fron ttoback in
the direction of the fabric.
! Never use any of the following to clean the
soft top:
R petrol
R thinner
R tar or stain remover
R other organic solvents
! Remove bird droppings immediately as
they are corrosive and, therefore, can make
the soft- topf abric leak. Do not use high-
pressure cleanin gequipmen ttoclean the
vehicle. Do not use sharp-edged equipment
to remov eice and snow.
Frequent cleaning reduce sthe resistanc eto
dirt of the soft top.
To restore this resistanc etodirt, clean the
soft top using soft top cleanin gagents that
have been recommended and approved by
Mercedes-Benz.
In co rrect cleaning and care, as well as ageing,
can cause th esoft top seam stoleak. Have
the soft-top seams sealed at aqualified spe-
cialist workshop, e.g. at aMercedes-Benz
Servic eCentre. Care
265Maintenance and care
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite2 65 Z