Coolant
Important safety notes The coolan
tisamixture of water and anti-
freeze/corrosio ninhibitor. It performs the
following tasks:
R anti-corrosio nprotection
R antifreeze protection
R raising th eboiling point
i When the vehicle is first delivered, it is fil-
led with acoolant mixtur ethat ensures
adequate antifreeze and corrosion protec-
tion.
! Only top up with coolant that has been
premixed with the desired antifreeze pro-
tec tion. You coul dotherwis edamage the
engine.
Further information on coolants and on fill-
ing can be found in the Mercedes-Benz
Specifications for Service Products, MB
Approval 310.1 ,e.g. on the Internet at
http ://bevo.mercedes-benz.com .You can
also consult aMercedes-Benz Service
Centre.
! Alway suseasuitable coolant mixture,
even in countries where high temperatures
prevail.
Otherwise, the cooling system will not be
sufficiently protected from corrosion, and
the boiling point will be too low.
If antifreeze/corrosio ninhibitor is present in
the correc tconcentration, the boilin gpoint of
the coolant will be around 13 0†.
The antifreeze/ corrosion inhibitor con centra-
tion in the cooling system should:
R be at leas t50%. This wil lprotect the cooling
system against freezing down to around
37 †.
R not exceed 55% (antifreeze protection
down to -45 †); otherwise ,heat will not be
dissipated as effectively. If the vehicle has lost coolant, top it up with
equal amounts of water and antifreeze/cor-
rosion inhibitor. Mercedes-Ben
zrecom-
mends an anti freeze/cor rosion inhibitor
whic hhas been approved for Mercedes -Benz.
! The coolin gsystem is filled with coolant
which must be renewed after 15 years, or
after 250,000 km at the latest.
The warrant yisonly valid if you top up with
an antifreeze /corrosion inhibitor which
has been approved by Mercedes-Ben zand
if the recommend edmixt urer atio is
obser ved. Vehicl
edata Vehicle data,
E200 CG IBlueEFFI-
CIENCY Vehicle dimensions
Vehicle length (ECE)
Coupé
4698 mm
Cabri
olet 469
8mm Vehicle width including exterio
rmirrors Coupé
20
28 mm Cabriolet
201
5mm Vehicle height
62 Coupé
139
3mm Cabriolet
140
2mm Wheelbase
Coupé
276
0mm Cabriolet
276
0mm 62
Thev alues specified may diffe rfrom the actual values ,depending on the tyres, load, optional equipment
and the state of the suspension. Vehicl
edata
317Technical data
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 317 Z
recommend
sthat you use aMercedes-Benz
Ser vice Centre for thi spurpose. In particular,
work relevant to safety or on safety-related
systems must be carried out at aqualified
specialist workshop.
! If you have atrailer to whitchr etrofit ted,
changes to the cooling system may be nec-
essary, depending on the vehicle type.
If you have atrailer to whitchr etrofit ted,
observe the anchorage point sonthe chas-
sis frame. An
chorage point sfor the trailer tow hitch
: Anchorage points
; Overhang dimension
= Rear axle centre line
For trailer tow hitches fitted at the factory ,the
overhang dimension is 1151,3 mm. Trailer loads
All models
Permissible trailer
load, unbraked
75
0kg Permissible trailer
load, braked
70 1800 kg
Maximu
mdrawbar
nose weight71 75 kg
70
At am inimum gradient-climbing capability of 12% from astandstill.
71 The drawbar noseweigh tisnot included in the trailer load. Trailer tow hitch
323Technical data
BA 207ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 323 Z
