2010 MERCEDES-BENZ E-CLASS CABRIOLET light

i
Notethat regular car eisessential to
ensure that the appearanc eand comfort of
the covers is retaine dover time.
Cl eaning the seat belts X
Use clean, lukewarm water and soa psolu-
tion.
! Do not clea nthe seat belts usin gchemical
cleanin gagents. Do not dry the seatbelts
at temperatures abov e80† or by exposing
them to direc tsunlight. 270
CareMain
tenance and ca re
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalaf aV ersion: 3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 270

X
Make sur epressure release screw Fon
pressure gauge Gis full yclosed.
X Screw filler hose Donto valve E.
X Insert connector Ainto the cigarette
lighter socket (Y page 252)orinto a12V
socket in your vehicle (Y page 253).
X Tur nthe key to position 1(Ypage 135) in
the ignition lock.
X Press on/off switch ?on the electric air
pum pto I.
The electric air pum pisswitched on. The
tyre is inflated.
i First, TIREFI Tispumped into the tyre. The
pressure can briefly rise to approximately
500 kPa (5 bar/73 psi).
Do not switch off the electric pum pdur-
in gt his phase.
X Let th eelectric pump run for fiv eminutes.
The tyre should then have attained apres-
sure of at le ast180 kPa (1.8 bar/26 psi).
! Do not operate the el ectric ai rpump for
longe rthan eight minutes at atime without
ab reak. It may otherwis eoverheat.
Th ea ir pump can be operated again once
it has cooled down.
If after fiv eminutes apressure of 180 kPa
(1.8 bar/26 psi) ha sbeen achieved, see
(Y page 279).
If after fiv eminutes apressure of 180 kPa
(1.8 bar/26 psi) ha snot been achieved, see
(Y page 279). TIREFIT kit version 2 X
Pull connector ?with the cable and hose
A out of the housing.
X Screw hose Aonto flange Bof TIREFIT
sealant fil lerb ottle :.
X Place TIREFI Tsealant filler bottle :head
downwards into recess ;of the electric
air pump. X
Remove the cap from valve Con the faulty
tyre.
X Screw filler hose Donto valve C.
X Insert connector ?into the cigarette
lighter socket (Y page 252) or into a12V
socket in your vehicle (Y page 253).
X Turn the key to position 1(Ypage 135 )in
the ignition lock.
X Press on/off switch =on the electric air
pump to I.
The electric air pump is switched on. The
tyre is inflated. 278
Flat tyreBreakdown assistance
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 278

more informati
on on which tools are
required to perfor mawheel change on your
vehicle, e.g. wheel chock ,wheel wrenc hor
centring pin, consult aMercedes-Benz
Servic eCentre.
X Prepar ethe vehicle as described
(Y page 275).
X Ifat railer is coupled to th evehicle, uncou-
ple it.
X Remov ethe followin gitems from the stow-
age well under the boo tfloor:
R the emergenc yspare wheel
R the vehicle tool kit
R the foldin gwheel chock
R the jack
X Secur ethe vehicle to preven titfrom rolling
awa y.
Se curing the vehicle to prevent it from
rolling away If your vehicle is equipped with
awheel choc k,
it can be found in the vehicle tool kit
(Y page 274).
The folding wheel chock is an additional
securing measure to prevent the vehicle from
rolling away, for example when changing a
wheel. X
Fold both plates upwards :.
X Fold out lower plate ;.
X Guide the lugs on the lower plate fully into
openings in base plate =. Securing the vehicle on level ground (example,
Coupé)
X
On level ground: place chocksorother
suitable items under the front and rear of
the whee lthat is diagonally opposit ethe
wheel you wish to change. Securing the vehicl
eonslight downhill gradients
(example, Coupé)
X On downhill gradients: place chocksor
other suitable item sinfront of th ewheels
of the front and rea raxle.
Raisin gthe vehicle G
Ris
kofi njury
The jac kisintende donly for lifting the vehicle
briefly for wheel changes.
The vehicl emust be placed on stands if you
intend to work under it.
Make sure that the jack is placed on afirm,
non-slip, level surface. Do not use wooden
blocks or similar object sasajack underlay.
The vehicle could otherwise slip off the jack
and seriousl yinjure you. Flat tyre
281Breakdown assistance
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 281 Z

X
To open: pull outcover :slightly at the
bottom in the direction of arrow =.
X Pull cover :outwards in the direction of
arrow ;and remove it.
X To close: clip in cover :on the front of
the dashboard.
X Fold cover :inwards until it engages. Fuse box in th
eengine compartment
X Make sure that the windscreen wiper sare
turne doff. G
Ris
kofi njury
Make sure that the windscreen wipers are
turned off and the key is pulled out of the igni-
tion lock befor eyou open the cover of the fuse
box. Otherwise, the windscreen wiper sand
the wipe rrods abov ethe cover coul dbeset
in motion .This coul dlead to you or others
being injured by the wiper rods.
X Open the bonnet (Y page 259). X
Remov eany existing moisture from the
fuse box using adry cloth.
X Take lines ;from th eguides.
X Move aside lines ;.Route the lines behind
con nection =to do this.
X To open: open clamps :.
X Remove the fuse bo xcover forwards.
X To close: checkwhether the rubber seal is
lyin gcorrectly in the cover.
X Insert the cover at the rea rofthe fuse box
int ot he retainer.
X Fold down the cover and close clamps :.
X Secur elines ;in the guides.
! The cover must be fitted properly, other-
wise moisture or dirt could impair the func-
tion of the fuses.
X Close the bonnet (Y page 260). Fuse box in the boot
X Open the boot lid. Coupé
X
To open: turn rotarycatch :clockwise.
X Open cover ;downwards. 294
FusesBreakdown assistance
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version:3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 294

E2
00 CGI 43
E2 20 CDI 43
E2 50 CGI 43
E2 50 CDI 43
E3 50
E3 50 CGI 43
E3 50 CDI 43 E5
00 R17 BA
Summer tyres
46 235/45 R17 94 W
or
235/45 R17 94 W
MOExtended
47 —
Winter tyres
235/45 R17 94 H
M+S
i
or
235/45 R17 94 H
M+S i
MOExtended 47
,48 235/45 R17 94 H
M+Si
or
235/45 R17 94 H
M+Si
MO
Exte nded 47, 48 Light-
alloy wheels 7.5J
x17H2ET45 7.5J
x17H2ET45 E2
00 CGI 43
E2 20 CDI 43
E2 50 CGI 43
E2 50 CDI 43
E3 50
E3 50 CGI 43
E3 50 CDI 43 E5
00 R18 BA Winter tyres
235/40 R18 95
HXL
M+S i 235/40 R1
895HXL
M+S i Ligh
t-alloy wheels 8.0J
x18H2ET45 8.0J
x18H2ET45 Mixed tyres
i FA:front axle, RA: rear axle
43 BlueEFFICI ENCY.
46 Cabriolet :not in combination with Sports package code 950/952, sports suspension code 48 6ordynamic
handling package code 483.
47 Tyres with run-flat characteristics and only in combination with an activated tyre pressure loss warning
syste mort yre pressure monitor.
48 Winter tyres for retrofitting. Only certain tyre brands are approved. Ask your Mercedes-Benz Service Centre
for more information. Wheel and tyr
ecombinations
305Tyres and wheels
BA 207ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 305 Z

E2
00 CGI 49
E2 20 CDI 49
E2 50 CGI 49
E2 50 CDI 49
E3 50
E3 50 CGI 49
E3 50 CDI 49 E5
00 R17 FA Summer tyres
235/45 R17 94 W
or
235/45 R17 94 W
MOExtended
50 235/45 R17 94 W
or
235/45 R17 94 W
MOExtended
50 Light-alloy wheels
7.
5Jx17H2ET45 7.
5Jx17H2ET45 RA
Summer tyres
51 255/40 R17 94 W
or
255/40 R17 94 W
MO
Exte nded 50 255/40 R17 94 W
or
255/40 R17 94 W
MO
Exte nded 50 Light-
alloy wheels 8.
5Jx17H2ET49 8.
5Jx17H2ET49 E2
50 CGI 49
,
52
E2 50 CDI 49
,
52
E3 5052
E3 50 CGI 49
,
52
E3 50 CDI 49
,
52 E5
00 R18 FA Summer tyres
235/40 R18 91 Y 235/40 R18 91 Y
Light-alloy wheels
8.
0Jx18H2ET45 8.
0Jx18H2ET45 RA
Summer tyres
51 255/35 R18 94
YXL 255/35 R18 94
YXL Light-alloy wheels
8.
5Jx18H2ET49 8.5J
x18H2ET49 Spar
ewheel
Depending on the cou ntry,the engine and th ewheels fitted, your vehicl emay be equipped
with aTIREFI Tkit or a"Minispare" emergency spar ewheel.
49 BlueEFFICIENCY
50 Tyres wit hrun-flat characteristic sand only in combination with an activated tyre pressure loss warning
system or tyre pressure monitor.
51 Use of snow chains not permitted.
52 Only in combination with Sport spackage code 950/952, sports suspension code 486 or dynamic handling
package code 483. 306
Wheel and tyr
ecombinationsTyres and wheels
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 306

numb
er (VIN) is also stamped onto th evehicle
body.
It is located on the floor in front of the right-
hand front seat. X
Slide the right-hand front seat to its rear-
most position.
X Slightl yraise front floor covering =and
fold floor covering flap :upwards.
You will see vehicle identification number
(VIN) ;. Engine number
The engine number is stamped on the crank-
case. More information can be obtained from
any Mercedes-Benz Service Centre. Servic
eproducts and capacities Important safety notes
Service products include the following:
R fuels (e.g. petrol, diesel)
R lubricants (e.g. engine oil, transmission oil)
R coolant
R brake fluid
R windscreen wash erfluid Mercedes-Ben
zrecom mends that you use
product swhich hav ebeen tested and spe-
ciall yapproved by Mercedes-Ben zfor your
vehicle and ar elisted in this Mercedes-Benz
Owner' sManual in the relevant section as:
R parts and service products are matched.
R damage caused by the use of non-approved
service products is not covered by the
implied warranty
You can recognise service products approved
by Mercedes-Benz by the following inscrip-
tion on the containers:
R MB-Freigabe (e.g. MB-Freigabe 229 .51)
R MB Approval (e.g. MB Approval 229.51)
Othe rdesignations or recommendations that
relate to alevel of quality or aspecification in
accordan cewith an MB Sheet number (such
as MB 229 .5)h ave not necessarily been
approved by Mercedes-Benz.
You can obtain further information from any
Mercedes-Benz Servic eCentre. G
Risk of inju
ry
When handling, storin gand disposing of any
service products, please observe the relevant
regulations ,asyou coul dotherwis eendanger
yourself and others.
Keep service products away from children.
To protect your health, do not allo wservice
products to com einto contact with your eyes
or ope nwounds. See adoctor immediately if
any service product is swallowed. H
Environmental note
Dispose of service products in an environ-
men tally-responsible manner. Fuel
Important safety notes G
Risk of explosion
Fuel is highly flammable. Fire, naked flames
and smokin gare therefore prohibited when
handling fuels. Servic
eprodu cts and capacities
313Technical data
BA 207ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 313 Z