2010 MAZDA MODEL CX-9 window

Key
12
L I F T G AT E
•
To open, pull up on the handle and
raise the liftgate.
•
To close, push liftgate down until it
securely locks, but do not slam.
S TA rTI nG T hE E nGI nE
While Carrying the Advanced Key…
•
Start the engine by pushing the start knob in and turning it (like a
normal key) while depressing the brake pedal.
•
Shut the engine OFF by turning the star t knob to the ACC position
and then pushing in and turning to the Lock position.
•
The KE y indicator light will show green when the advanced key is
detected. If the KE y indicator light flashes green, the advanced key
transmitter battery power is low.
P OWE r LIFTGATE
•
To open or close using the keyless transmitter, push and hold the
open/close button for one second or more.
•
To open or close from the driver’s seat, push and hold the power liftgate
switch on the dashboard (see Driver’s View) for one second or more.
•
To close when the liftgate is open, push and hold the power liftgate
switch located on the lower edge of the liftgate panel for one second
or more. Liftgate

h andle
Liftgate handle
Power Liftgate Switch
ADVA nCED KE yLESS E nTry S ySTEM
• This system allows you to lock and unlock
the doors, open the liftgate and even start
the engine without taking the key out.
While Carrying the Advanced Key…
• Unlock the driver’s door by pushing
the driver’s door request switch once.
• Unlock all doors by pushing the
driver’s door request switch twice
OR by pushing the passenger’s door
request switch.
• Lock or unlock the liftgate by
pushing the lif tgate request switch once.
•
Lock all doors by pushing the driver’s
door or passenger door request
switch once.
• Open the front windows and
moon roof by pushing the unlock
button on the advanced keyless
entry transmitter and then pushing
again and holding; release to stop.
• Close front windows and moon roof
by pushing and holding the driver’s
door request switch; release to stop.
KE yLESS E nTry S ySTEM
This system remotely locks and unlocks the doors and the liftgate, and opens
the power windows and moon roof.
r elease Button
• Push to extend key.
• Push & fold to retract key.
Lock
• Push once to lock all
doors and liftgate.
•
Push twice (within five
seconds) for horn sound
verification that all doors
are locked.
Unlock
• Push once to unlock
driver’s doors.
•
Push twice (within three
seconds) to unlock all
doors and liftgate.
•
Push twice and hold to open
front windows and moon roof.
Panic Alarm
• Push for one second or
more to activate alarm.
•
Push Lock, Unlock, or
Panic Alarm to turn
alarm off.
Liftgate r equest Switch
With the Auxiliary Key…
1 To start engine, remove the
Star t knob cover by pushing
both release buttons and
pulling the cover off.
2 Push the key release to
remove the auxiliary key.
3 Inser t the auxiliar y key into
the key cylinder and turn
it to start the engine.
Liftgate
Panic Alarm
Lock
Unlock
Door r
equest Switch
193094_10a_CX-9_SSG_070109.indd 2-37/1/09 10:07:53 AM

Feature Highlights
910
LIGhTI nG CO nTr OL/TU rn SIG nAL LEVE r
Pull
to Flash
h igh Beams Push for

h igh Beams
: Turns tail, parking, dashboard,
and headlights on.
AUTO: The light
sensor automatically
determines when to turn
the headlights on or off.
: Turns fog lights
on only when headlights
are on.
:
Turns tail, parking,
and dashboard lights on.
WInDS hIELD WIPE r/WAS hEr CO nTr OL LEVE r
rear Window
Wiper/Washer
I n T = Intermittent
O n = Normal speed
=
Rear washer/wiper
(hold as desired)
AUTO: The rain sensor senses the amount of rainfall and turns the wipers
on or off. Rotate inner ring away from you (clockwise) for less sensitivity
(requires more rain to turn wipers on) and towards you (counterclockwise)
for more sensitivity (requires less rain to turn wipers on).
n O T E :
Vehicles not e quipped with AUTO wipers will have INT wipers. Set the lever
to INT and choose an interval timing by rotating the ring between fast and slow.
AUTO(auto wipers)
OFF
MIST(single wipe)
LO (low
speed wipers)
HI (high
speed wipers)
Pull lever
to dispense
windshield
washer fluid.
More sensitive
Less sensitive
193094_10a_CX-9_SSG_070109.indd 10-117/1/09 10:09:00 AM

1516
Information Display Functions
• Driver’s Temperature
•
Climate Control
• Clock / Trip Computer •

Audio
• B l u e t o o t h
® Hands-Free
•
Outside/Passenger Temperature
n OTE:
With defroster and floor vents or windshield defroster mode, the system
turns on the A /C compressor and selects the FRESH AIR mode. This helps defrost
the windows more efficiently by dehumidifying the air. The A /C compressor will
always be on in defroster mode, but the defroster (and floor) will deliver warm air
when the temperature dial is set to a warmer temperature and the engine warms up.
n OTE: If the rear AUTO button is pressed while the front A /C button is off, the rear
air conditioning operates only to circulate air. Setting the temperature to the maximum
high or low will not provide the desired temperature at a faster rate.
Automatic Climate Control
The driver and front passenger
seats can be warmed by pushing
the applicable seat warmer button
while the ignition is ON.
•
Seat temperature increases as
the number of indicator lights
increases. Two lights equal
high, one light equals low.
•

When the seat warmers are
not needed, push button until
indicator lights are off.
Fr OnT S EAT W Ar ME rS
Push to manually turn
air conditioning ON or
OFF while climate control
system is on.
Push to select the
desired airflow mode.
Push to display outside
temperature. Push and hold
for three seconds or longer
to switch from Fahrenheit
and Celsius or vice versa.
Push to turn climate
control system off.
Push to defrost
the windshield. Push to defrost the

rear window.
Push to allow control from the
rear controls (indicator on).
Rotate dial to turn the
system ON and to select
the desired fan speed.
Push to allow separate
driver/passenger
temperature control.
Push to recirculate cabin air
to reduce outside odors and
improve cooling (indicator
on) or receive fresh air
(indicator off).
Automatic Climate Control Operation

1 Push AUTO to turn the front air conditioning on.
2 Rotate AUTO dial (driver’s temperature control) to the desired cabin
air temperature setting (shown in the Information Display above).

n OTE: Rotating fan control dial, or pushing the MODE button, or A /C switch,
or windshield defroster switch while in AUTO ON mode will cancel auto A /C.
Dual z one Operation
• To allow the passenger to independently control passenger side
temperature setting, rotate the DUAL dial (passenger’s temperature
control) or push the DUAL button. The DUAL indicator will
illuminate and passenger temperature setting will be displayed on
the Information Display.
• To turn off Dual Zone operation, push the DUAL button.
rear Climate Control Operation from Front Seats
1 Turn the front air conditioning on.
2 Push the REAR control button on the front
control panel (indicator on).
3 Selection of the air flow mode, air flow amount
and temperature will be automatically controlled
to the same setting as the front air conditioner.
Information Display
MODE
OFF
rEAr
OUTSIDE
TEMP rEAr
FrOnT
DUAL
193094_10a_CX-9_SSG_070109.indd 16-177/1/09 10:09:38 AM