2010 MAZDA MODEL CX-9 key

Key
12
L I F T G AT E
•
To open, pull up on the handle and
raise the liftgate.
•
To close, push liftgate down until it
securely locks, but do not slam.
S TA rTI nG T hE E nGI nE
While Carrying the Advanced Key…
•
Start the engine by pushing the start knob in and turning it (like a
normal key) while depressing the brake pedal.
•
Shut the engine OFF by turning the star t knob to the ACC position
and then pushing in and turning to the Lock position.
•
The KE y indicator light will show green when the advanced key is
detected. If the KE y indicator light flashes green, the advanced key
transmitter battery power is low.
P OWE r LIFTGATE
•
To open or close using the keyless transmitter, push and hold the
open/close button for one second or more.
•
To open or close from the driver’s seat, push and hold the power liftgate
switch on the dashboard (see Driver’s View) for one second or more.
•
To close when the liftgate is open, push and hold the power liftgate
switch located on the lower edge of the liftgate panel for one second
or more. Liftgate

h andle
Liftgate handle
Power Liftgate Switch
ADVA nCED KE yLESS E nTry S ySTEM
• This system allows you to lock and unlock
the doors, open the liftgate and even start
the engine without taking the key out.
While Carrying the Advanced Key…
• Unlock the driver’s door by pushing
the driver’s door request switch once.
• Unlock all doors by pushing the
driver’s door request switch twice
OR by pushing the passenger’s door
request switch.
• Lock or unlock the liftgate by
pushing the lif tgate request switch once.
•
Lock all doors by pushing the driver’s
door or passenger door request
switch once.
• Open the front windows and
moon roof by pushing the unlock
button on the advanced keyless
entry transmitter and then pushing
again and holding; release to stop.
• Close front windows and moon roof
by pushing and holding the driver’s
door request switch; release to stop.
KE yLESS E nTry S ySTEM
This system remotely locks and unlocks the doors and the liftgate, and opens
the power windows and moon roof.
r elease Button
• Push to extend key.
• Push & fold to retract key.
Lock
• Push once to lock all
doors and liftgate.
•
Push twice (within five
seconds) for horn sound
verification that all doors
are locked.
Unlock
• Push once to unlock
driver’s doors.
•
Push twice (within three
seconds) to unlock all
doors and liftgate.
•
Push twice and hold to open
front windows and moon roof.
Panic Alarm
• Push for one second or
more to activate alarm.
•
Push Lock, Unlock, or
Panic Alarm to turn
alarm off.
Liftgate r equest Switch
With the Auxiliary Key…
1 To start engine, remove the
Star t knob cover by pushing
both release buttons and
pulling the cover off.
2 Push the key release to
remove the auxiliary key.
3 Inser t the auxiliar y key into
the key cylinder and turn
it to start the engine.
Liftgate
Panic Alarm
Lock
Unlock
Door r
equest Switch
193094_10a_CX-9_SSG_070109.indd 2-37/1/09 10:07:53 AM

34
To Program the Driver’s Seat Position
1 Pa rk the vehicle.
2
Adjust the seat to the desired position using the slide/tilt and
recline switches.
3
While pushing the memory seat SET button in, push one of the three
programming buttons until a beep is heard. Programming is now
complete. Pr ogram the remaining two buttons as desired.

nOTE: You can als o program a seat position for each advanced key/retractable type
key used with the vehicle. See Owner’s Manual for programming instructions.
To Move the Seat to a Programmed Position
• With driver’s door OPE n and ignition OFF, push and release one
of the programmed buttons (1, 2, or 3) when entering the vehicle.
Or
• With driver’s door CLOSED and ignition O n, push and hold one of
the programmed buttons ( 1, 2, or 3).
n OTE:
Me mory seat functions DO NOT operate when driver’s door is OPEN and
ignition is ON, when driver’s door is CLOSED and ignition is OFF, or when the vehicle
is in motion.
Seats
ELECT rO nICALL y OPE rATED SEAT W/MEMO ry
Slide/Tilt Switch
Seat can be moved back
and forth, raised, lowered,
or tilted with this control.
Lumbar Switch
Push forward or backward to increase or
decrease lumbar support.
r ecline Switch
Push forward or backward
to adjust seatback angle.
Memor y Seat Switch
1 Open liftgate.
2
Lower head restraints.
3 Pull the strap on the rear of the
seat while pushing the seat
forward to lay flat.
To r eturn to the Original Position

Pull the strap to return the seatback to the original position.
ThIr D -rOW S EAT ACCESS
• Pull the third-row seat access lever on the
side of the second-row seatback to fold
and slide the seat forward to access
third-row seating.
•
Return the second-row seatback to the
normal upright position by pulling up on
the seatback until it locks into place.
•
Slide the second-row seat for ward or back
for proper legroom using the lever under
the front of the seat.
S ECO nD rOW S EATBACK rECLI nE
To recline the seatback, lean forward slightly while pulling the third-row
seat access or seatback folding lever. Then lean back to the desired
position and release the lever.
F OLDI nG T hE S ECO nD -rOW S EATS
1 Unfasten the lap portion of the center-rear seat belt.
2 Slide seat all the way back toward rear of vehicle.
3 Lower head restraints.
4 Pull the seatback folding lever and fold the seatback forward.
SPLIT F OLDInG Th Ir D -r OW SEAT
To create a flat luggage compar tment
space, fold the seatbacks forward.
Third-row seat
access lever
Seatback folding
lever
Straps
193094_10a_CX-9_SSG_070109.indd 4-57/1/09 10:08:07 AM

Instrument Cluster
78
Low Fuel
KEy Warning Light
(rED )
Advanced key not detected
or transmitter battery is dead.
KEy Indicator Light (Gr EEn )
On: Advanced key detected; engine
is ready to star t.
Flashing: Advanced key battery is low.
Check Fuel Cap
ABS
(Antilock Brake System)

ABS malfunction
Lights On (Exterior Lights) Tire Pressure

Monitoring System (TPMS)

Tire pressure may be low in one or
more tires.
TCS OFF
(Traction Control System)
Charging System
Charging system malfunction
Powertrain Malfunction/
reduced Power
BSM OFF
(Blind Spot Monitoring)
Check Engine
TAC hO M E T E r
F
UEL G AUGE
Brake
Parking brake on/low brake
fluid/malfunction
Turn Signals/
h azard Warning
Automatic Transmission

Transmission malfunction
A /T Shift Position
h eadlight h igh Beam
Traction Control System
(TCS)/Dynamic Stability
Control (DSC)

On: TCS/DSC malfunction
Flashing: TCS/DSC operating
Airbag/Front Seat Belt
Pretensioner System

On or Flashing: Airbag malfunction
Low Engine Oil Pressure
Security Indicator
Door Ajar
4WD
Dealer inspection is required if this
light is flashing, indicating high
temperature dif ferential oil, or if the
light stays illuminated, indicating an
abnormality with the system.
Seat Belt Seat Belt unbuckled/malfunction
Cruise Main Indicator
Light
( A MBE r)/Cruise Set
Indicator Light
( Gr EEn )
Low Washer Fluid
SPEEDOMETErT r IP METE r
SELECTO r
In
ST rUME nT
CLUSTE r DIMME r1EnGInE COOLA nT
TEMPE rATU rE GAUGEODOMETE r/
Tr IP METE r2GEA r In DICATO r
TCS
OFFKE y
KE
y
4WD
BSM
OFF
GLOSSA ry OF W Arn In G A nD I nDICATO r LIGhTS
n OTE: See Owner’s Manual for more details and explanations.
nOTE: The tire pressure should be set when tires are cold. Large changes in ambient
temperatures or altitude will cause tire pressure change and may cause TPMS warning
light to illuminate.1 nOTE: If the instrument cluster and other dashboard illuminations do not dim when turning on the
head lights, push the knob.
2 • Push to toggle between odometer and trip odometer (A & B).
• When a trip meter is selected, push and hold to reset to zero.
193094_10a_CX-9_SSG_070109.indd 8-97/1/09 10:08:43 AM

Navigation System
2324
(inserting disc/selecting destination)
Your navigation system operates using the map discs supplied.
• Disc A covers most of the Midwest and Western states including
Hawaii and Alaska.
•
Disc B covers some of the Midwest and all of the Eastern states
including Puerto Rico.
• Both discs cover all of Canada.
n OTE:
If the “state your address is in” is not displayed when entering a destination,
you may have the wrong disc in the navigation system.
1 Push LO AD .
2 When “Load/Eject” screen appears select “MAP”. Wait for navigation
screen to tilt open.
3 Remove current map disc (if installed) and insert the desired map disc,
with the printed side facing up, into the lower DVD MAP slot.
4 Read the Caution carefully and select the “AGREE” on-screen button.
In SE rTI nG T hE M AP D ISC S
ELECTI nG A DESTI nATIO n USI nG A ST rEET ADD rESS
You can choose setting a destination using a street address, a point of
interest, the nearest restaurants, ATMs, gas stations, hospitals and more.
1 Push “ MENU ” button next to navigation screen.
2 Select “Destination Entry” on navigation screen.
3 Select “Address”.
4 Select the “State” or “Province”.
• Scroll down past the States to find Canadian Provinces.
5 Select “OK”.
6 Select “City”.
7 Select “Input City Name”.
8 Use the keyboard to enter the city name.
9 Select “Street”.
10 Use the keyboard to enter the street name.
11 Select “House No”.
12 Use the keyboard to enter the house number, then select “OK”.
13
When the map appears, select “Destination”.
14
Select “Guide” or just start driving.
n OTE:
When entering numbers for a street name, (e.g. 1st Ave.), push “Sym.”
button to switch to the numeric keyboard.
SELECTI nG A POI nT OF I nTE rEST (POI)
n EA r y OUr CU rrEn T LOCATIO n
1 Push “ MENU ” button next to navigation screen.
2 Select “Destination Entry” on navigation screen.
3 Select “Point of Interest”.
4 Select “Nearest”.
5 Select “Current Position”.
6
In the QUICK POI screen, select the category of the point of
interest you want to find. You can set multiple categories for
searching up to five.
7 After selecting categories, select “List”.
8
Search result shows up as a list in “LOCAL POIs” screen. Select
the point of interest you want to set as the destination from the list.
9 Select “Destination”.
10 Select “Guide” or just start driving.
Please refer to your Navigation System Owner’s Manual for complete
details and important safety information.
Insert map disc into lower DVD slot
Disc AO
C
I
R

O
T
R
E
U
P
I
I
A
W
A
HDisc B
O
C
I
R

O
T
R
E
U
P
I
I
A
W
A
HDISC ADISC B
193094_10a_CX-9_SSG_070109.indd 24-257/1/09 10:10:18 AM

Keyless Entr y
...............................1-2 • Keyless Transmitter
• Advanced Key*
• Door Request Switches*
• Liftgate Request Switch*
• Power Door Locks
Starting The Engine
.......................2 • Star t Knob Ignition
(Advanced Key*)
Liftgate
............................................2
• Manual Operation
• Power Liftgate (PLG) Operation*
Seats
............................................3-4 • Adjustment
• Memory Seat Function*
r
ear Seat Access ...........................4 • 2nd and 3rd row seating access
Driver’s View
...............................5-6 • Location of Switches and Controls
Instrument Cluster
.....................7- 8 • Review indicator light function
and location
Lighting Control
.............................9
Wiper/Washer
................................10
Sport A /T Manual Shift Mode ......11
Customer Delivery ChecklistCustomer Delivery Checklist
SALES COnSULTA nT CUSTOMEr
All items in the Customer Delivery Checklist have been reviewed with the customer and
the first maintenance appointment has been scheduled:
*if equipped
Signed copy must be placed in dealer jacket
DEALErSh IP DAT E
SALES CO nSULTA nT CUSTOMEr’S n AME
VIn E-MAIL
Smart Start Guide
•
Remove this checklist from
Smart Start Guide
Warranty Information
•
Basic Vehicle –
36 months/36,000 miles
• Roadside assistance program
MyMazda.com
•
Offer to register customer on
MyMazda.com
Owner’s Manual

Pr
ESE nTATIO n OF O WnEr’ S M ATE rIALS :
Review the following items with the customer
SErVICE D EPArTME nT
Introduce Service Manager;
Provide business cards
Review Ser vice and Par ts Depar tment
hours of operation
Explain free Full Circle
Ser vice Inspection
Schedule first maintenance service
Scheduled Maintenance
Windshield Cling Reminder
Affix to inside windshield
V E h ICLE P rESE nTATIO n:
Refer to the Smart Start Guide during presentation
Fuel Door
......................................11 • Fuel-Filler Door Release
Auto-Dimming Mirror ..................12
homeLink® ....................................12
Blind Spot Monitoring
.................13
AUX Input
......................................14
Climate Control
.........................15 -16 • Front Controls • Rear Controls
Audio Controls
..........................17-2 2 • SIRIUS® Satellite Radio Operation
• Trip Computer (INFO Button)
• Back-Up Camera (Navigation only)
Set Clock
..............................17, 19, 22
n
avigation System* .................23-24
• 2 Disc System, Insert Disc
• Enter Destination
• Select POI
Bluetooth®
h ands-Free ...............25 • Tutorial • To l l - F r e e
• Pair Phone Customer Service
• Make a Call 800-430-0153
193094_10a_CX-9_SSG_070109.indd 28-297/1/09 10:10:37 AM