2010 Lexus HS250h Wide View Front Monitor System / LEXUS 2010 HS250H OWNERS MANUAL (OM75006U)

177
2-2. Instrument cluster
2
When driving
HUD (Head-up Display) main switch
Pressing the switch turns the head-
up display on/off and changes the
vehicle speed display units as fol-
lows:
Vehicles sold in the U.S.A. 
OFF  ON (mph)  ON (km/h)
 OFF
Except vehicles sold in the U.S.A. 
OFF  ON (km/h)  ON (mph)
 OFF
When the head-up display is on, a
pr
olonged press will turn the touch
tracer display or audio display
ON/OFF. ( P. 1 8 1
)
●Turn-by-turn navigation
Displays a notification of upcoming intersections
during navigation system route guidance

●Touch tracer display
Displays the switch operation status when the
steering switch is operated. 


178
2-2. Instrument cluster
Turn-by-turn navigation switch
Pressing the switch turns the turn-
by-turn navigation on/off, when the
head-up display is on.
The switch indicator illuminates
while the turn-by-turn navigation is
active.
Display adjustment
The display position and brightness of the head-up display can be
changed when necessary.
■ A
djusting display contrast
Brighter
Darker
■ A
djusting display position
Higher
Lower

179
2-2. Instrument cluster
2
When driving
Touch tracer display function
The switch operation is shown on the head-up display when the steering
switch provided on the steering wheel is oper ated. The driver can oper-
ate the steering switch without s eeing it on the steering wheel.
The display will change in
r
esponse to steering switch opera -
tion.
Touching the steering switch will
cause the touch tracer display to
appear on the head-up display.

180
2-2. Instrument cluster
■Touch tracer display
Only the switch that is being
operated is highlighted, and
thus, the driv
er can perceive
which button is being operated.
The applicable switch displayed
on the head-up display will
change in r

esponse to the
switch operation.
Taking your finger off the steering
switch returns the display to the
vehicle speed indication.
It is possible to turn the touch
tr
acer display ON/OFF as neces -
sary. ( P. 1 8 1 )
Turn-by-turn navigation
When the vehicle approaches an
intersection, the direction the vehi -
cle should go is guided by the
arr

ow.
When the vehicle approaches an
intersection, the r
oute guidance
will start and the distance
* to the
intersection will also be displayed.
The animation guidance changes
according to the vehicle conditions
(running or stopped).
*:The distance decreases in incre -
ments of 50 yards and the dis -
tance indication will disappear
when the v
ehicle passes through
the intersection.

181
2-2. Instrument cluster
2
When driving
Display customization
The touch tracer display and audio display can be hidden (not display) if
desired.
■ T
ouch tracer display
Pressing and holding the HUD
(He
ad-up Display) main switch for
more than 2 seconds changes the
display to touc h tracer display
ON/OFF mode. Press the HUD
(Head-up Display) main switch to
select ON or OFF.
Customization can be performed
when the head-up display is on and
the vehicle is traveling at less than
5 mph (8 km/h).
■ Audio display
With the touch tracer display ON/
OFF selection mode display
ed,
press and hold HUD (Head-up
Display) main switch for more than
2 seconds again to enter audio
display ON/OFF selection mode.
ON or OFF can be selected by
pressing HUD (Head-up Display)
main switch.
Customization can be performed
when the head-up display is on and
the vehicle is traveling at less than
5 mph (8 km/h).

182
2-2. Instrument cluster
■Brightness of the head-up display
The headlight control sensor detects the brightne
ss of the area surrounding the
head-up display and adjusts th e brightness accordingly. (P. 1 8 6 )
■Head-up display
The head-up display may seem dark and hard to see when viewed through sun -
glasses, especially polarized sunglasses. 
Adjust the brightness of the head-up display or remove your sunglasses.
CAUTION
■Before using the head-up display
Check that the position and brightness of the head-up display image does not inter-
fere with safe driving. Incorrect adjustme nt of the image's position or brightness
may obstruct the driver's view and lead to an accident, resulting in death or serious
injury.
NOTICE
■To prevent damage to components
●Do not place any drinks near the head-up
display projector. If the projector gets wet,
electrical malfunctions may result.
●Do not place anything on or put stickers
onto the head-up display projector. 
Doing so could interrupt head-up display
indications.
●Do not touch the inside of the head-up dis-
play projector or thrust sharp edges or the
like into the projector. 
Doing so could cause mechanical malfunc-
tions.

183
2
When driving
2-3. Operating the lights and windshield wipers
Headlight switch
The headlights can be operated manually or automatically.
U.S.A.
Turning the end of the lever turns on the lights as follows:
Turn off the daytime
running light system
The headlights, park-
ing lights and so on
turn on and of
f auto-
matically (when the
“P

OWER” switch is in
ON mode).
The side marker, park -
ing, tail, license plate
and instrument panel
lights turn on.
The headlights and all
the lights listed above
turn on.

184
2-3. Operating the lights and windshield wipers
Canada
Turning the end of the lever turns on the lights as follows:The headlights, park-
ing lights and so on
turn on and of

f auto-
matically (when the
“P
OWER” switch is in
ON mode).
The side marker, park -
ing, tail, license plate
and instrument panel
lights turn on.
The headlights and all
the lights listed above
turn on.