2010 Lancia Delta reset

14GETTING TO KNOW YOUR CAR
General failure indication (amber)
Fuel cut-off initiated
This warning light (or symbol on the display)
comes on when the fuel cut-off system cuts in.
The display will show a dedicated message.
Engine oil pressure sensor failure
This warning light (or symbol on the display) comes on
when a failure is detected in the engine oil pressure sen-
sor. The display will show a dedicated message.
Dusk sensor failure
This warning light (or symbol on the display) comes on
when a failure is detected in the dusk sensor.
Speed limit exceeded
This warning light (amber), or symbol on the display
(red), comes on when the preset speed limit is exceeded
(for Arabic countries the speed limit is set at 120 km/h).
The display will show a dedicated message.
Rain sensor failure
(for versions/markets, where provided)
This warning light (or symbol on the display) comes on
when a fault is detected in the rain sensor.
The display will show a dedicated message.
è
Parking sensor failure
(for versions/markets, where provided)
This warning light (or symbol on the display) comes on
when a fault is detected in the parking sensors.
The display will show a dedicated message.
Tyre pressure monitoring system failure
(for versions/markets, where provided)
This warning light (or symbol on the display) comes on
when a failure is detected in the T.P.M.S. system (for ver-
sions/markets, where provided).
Should one or more wheels be fitted without sensors, the
instrument panel warning light will come on and stay on
until initial conditions are restored.
The display will show a dedicated message.
NOTE If one of the above-mentioned faults occurs,
contact a Lancia Dealership as soon as possible.
AFS system failure
This warning light (or symbol on the display) comes on
when a failure is detected in the AFS system (see “Head-
lights” paragraph in this chapter). The display will show
a dedicated message.
001-142 Delta 3ed gb 30-11-2009 11:21 Pagina 14

18GETTING TO KNOW YOUR CAR
If the Ywarning light (or symbol in the display) is blinking,
this means that the vehicle is not protected by the engine in-
hibitor device (see “Lancia Code system” in chapter 1).
Contact a Lancia Dealership to have all the keys stored.
Alarm failure
(for versions/markets, where provided)
A fault with the alarm system is signalled by this warn-
ing light (or symbol in the display) coming on. Contact a
Lancia Dealership as soon as possible.
The display will show a dedicated message.
Break-in attempt
(for versions/markets, where provided)
This warning light (or symbol on the display) comes on
when a break-in attempt is detected. Contact a Lancia
Dealership as soon as possible.
The display will show a dedicated message.The warning light (amber), or symbol on the display (red),
lights up when the inflation pressure of one or more tyres
falls below a preset level. In this way the T.P.M.S. system warns
the driver that one or more tyres may be dangerously flat and
liable to puncture (see “ T.P.M.S. system” in this chapter).
IMPORTANT Do not continue driving with one or more
tyres flat as vehicle driveability may be compromised. Stop
the car, avoiding harsh braking or steering manoeuvres. Re-
place the wheel immediately with the small spare wheel (for
versions/markets, where provided) or carry out a repair us-
ing the dedicated kit (see the paragraph on “Replacing a
wheel” in chapter 4) and contact a Lancia Dealership as
soon as possible.
Check tyre pressure
This warning light (for versions/markets, where provid-
ed) comes on when the ignition key is turned to MAR, but
it should go off after a few seconds.
The warning light (or symbol in the display) lights up to
indicate that a tyre is flat (see “T.P.M.S. system ” in this
chapter).
Should two or more tyres be flat, the display will show the
indications corresponding to each tyre in sequence. Restore
the correct inflation pressure values as soon as possible (see
paragraph “Cold inflation pressures” in chapter “6”). Insufficient tyre inflation pressure
(for versions/markets, where provided)
This warning light (or symbol on the display)
comes on when the ignition key is turned to MAR,
but it should go off after a few seconds.
n
001-142 Delta 3ed gb 30-11-2009 11:21 Pagina 18

GETTING TO KNOW YOUR CAR31
1
This information can be consulted as follows:
– briefly press SET: the display shows the next service
deadline in km or mi according to the previous setting (see
paragraph “Distance unit of measurement”);
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen.
IMPORTANT The “Scheduled Servicing Plan” requires
the vehicle to be serviced every 35,000 km (or equiva-
lent distance is miles). This information is displayed au-
tomatically when the key is turned to MAR, from 2,000
km (or equivalent distance is miles) from the deadline,
and reappears every 200 km (or equivalent distance is
miles). The indications will appear more frequently when
there are less than 200 km left. The indication will appear
in kilometres or miles according to the unit of measure-
ment settings. When the next scheduled service opera-
tion is approaching, the message “Service” will appear on
the display followed by the number of kilometres or miles
left when the key is turned to MAR. Go to a Lancia Deal-
ership where the “Scheduled Service” operations will be
performed and the message will be reset.Air Bag/Passenger Bag
This function is used to activate/deactivate the front pas-
senger’s air bag.
Proceed as follows:
– briefly press SET and, after displaying the message “Bag
pass: Off) (to deactivate) or Bag pass: On) (to activate) by
pressing
ÕorÔ, press SET once again;
– the confirmation request message will be displayed;
– press
ÕorÔto select (Yes) (confirming activa-
tion/deactivation) or (No) (to abort);
– briefly press SET to confirm the setting and go back to
the menu screen or hold the button down to go back to the
standard screen without storing the new settings.
001-142 Delta 3ed gb 30-11-2009 11:21 Pagina 31

GETTING TO KNOW YOUR CAR33
1
Possible presence of ice on the road
The outdoor temperature indication starts
flashing when the outside temperature reach-
es or falls below 3°C and the symbol lights up
on the display to warn the driver of the possible presence
of ice on the road.
The display will show a dedicated message.Adaptive lighting not available
The display shows a dedicated message when the
adaptive lighting system is not available.
Contact a Lancia Dealership. External lighting failure (amber)
The symbol lights up on the display when a
fault is detected in the brake lights.
The display will show a dedicated message
W
❄
Lane assistance on
The display shows a dedicated message when
the lane assistance function is switched on.
ef
Steering corrector not available
(DST - Dynamic Steering Torque)
The display shows a dedicated message when
the steering corrector has failed. Contact a Lan-
cia Dealership.
è
Service deadline exceeded
The display shows a dedicated message to in-
dicate the scheduled servicing deadline.
Speed limit exceeded
The display shows a dedicated message when the preset
speed limit is exceeded (for Arabic countries the speed lim-
it is set at 120 km/h). The icon shown on the display rep-
resents the set speed limit.
õ
001-142 Delta 3ed gb 30-11-2009 11:21 Pagina 33

34GETTING TO KNOW YOUR CAR
TRIP COMPUTER
GENERAL FEATURES
The Trip computer is used to display information on car
operation when the key is turned to MAR. This function
allows you to define two separate trips called “Trip A” and
“Trip B” for monitoring the car’s complete mission (trip)
in a mutually independent manner.
Both functions can be reset (reset - start of new mission).
Trip A can be used to display figures relating to:
– Range
– Distance travelled
– Average fuel consumption
– Instantaneous fuel consumption
– Average speed
– Travel time (driving time).
– Trip A Reset
The Trip B function is used to display information relat-
ing to:
– Distance travelled B
– Average fuel consumption B
– Average speed B
– Travel time B (driving time).
– Trip B ResetNote “Trip B” functions may be excluded (see “Enabling
Trip B”). “Range” and “Instantaneous fuel consumption”
parameters cannot be reset.
Values displayed
Range
Approximately indicates the distance the vehicle can trav-
el with the present amount of fuel in the tank. The message
“- - - -” will appear on the display in the following cases:
– range value lower than 50 km (or 30 mi)
– car left parked with the engine running for a long time.
IMPORTANT Changes in the range value can be affect-
ed by many factors: driving style (see “Driving style” in
“Starting up and driving”), type of route (motorway, ur-
ban cycle, mountain roads, etc…), conditions of use of the
car (load, tyre pressure, etc.). The above notes should
therefore be taken into consideration when planning a trip.
Distance travelled
This indicates the approximate distance covered from the
start of the new mission.
001-142 Delta 3ed gb 30-11-2009 11:21 Pagina 34

GETTING TO KNOW YOUR CAR35
1
Average fuel consumption
This value shows the approximate average fuel con-
sumption from the start of the new mission.
Instantaneous fuel consumption
This indicates any change in fuel consumption. The value is
constantly updated. The message “- - - -” will appear on the
display if the car is parked with the engine running.
Average speed
This value shows the average speed of the car based on
the overall time elapsed since the start of the new mission.
Travel time
This value shows the time elapsed since the start of the
new mission.
Trip Reset
This resets the Trip computer settingsTRIP button fig. 8
The TRIP button is located on the right-hand lever. With
the ignition key turned to MAR, this button allows you
to view the previously described parameters and also ze-
ro them to begin a new mission:
– short press to display the different values;
– long press to reset and then start a new mission.
fig. 8L0E0007m
001-142 Delta 3ed gb 30-11-2009 11:21 Pagina 35

36GETTING TO KNOW YOUR CAR
New mission
The new mission begins after:
– “manual” resetting by the user, by pressing the rele-
vant button;
– automatic resetting, when the Trip distance reaches
9999.9 km or when the Travel time reaches 99.59 (99
hours and 59 minutes);
– disconnection/reconnection of the battery.
IMPORTANT If the reset operation is carried out when
“Trip A” is being displayed, only the information associ-
ated with this function is reset.
IMPORTANT If the reset operation is carried out when
“Trip B” is being displayed, only the information associ-
ated with this function is reset.
Start trip procedure
With ignition key turned to MAR, carry out the reset op-
eration by pressing and holding down the TRIP button for
longer than 2 seconds.
Exit Trip
You can automatically exit from the TRIP function once
all the values have been displayed or by holding the SET
button down for more than 1 second.SYMBOLS
Special coloured labels have been attached near to or on
some of the components of your car. These labels bear
symbols that remind you of the precautions to be taken
with regards to that particular component.
A plate summarising these symbols can be found under
the bonnet.
001-142 Delta 3ed gb 30-11-2009 11:21 Pagina 36

56GETTING TO KNOW YOUR CAR
Selecting air distribution B-fig. 26
Press one or more buttons

/ / ˙to manually select
one of the 7 possible air distribution settings:

Air flow to the windscreen and front side win-
dow vents to demist/defrost them.
Air flow to the front and rear foot well vents. This
distribution setting rapidly heats the passenger
compartment.

Air flow distribution between front/rear vents,
˙dashboard central/side vents, rear vent, wind-
screen and front side windows demisting vents.

Air flow distribution between foot well vents and
windscreen and front side window demisting/ de-
frosting vents. This distribution setting allows ad-
equate warming of the passenger compartment
and prevents the windows from misting up.
˙
Air flow distribution between foot well vents (hot-
ter air) and central/side dashboard vents and rear
vent (cooler air).
˙Air flow distribution between central/side dash-
board vents, rear vent and windscreen and front
side window demisting/defrosting vents. This dis-
tribution setting allows adequate ventilation of the
passenger compartment and prevents the windows
from misting up.
IMPORTANT For the climate control system to function,
one of the following buttons must be operated:

/ /
˙. The system does not allow all buttons
/  / ˙to
be switched off.
IMPORTANT Press OFF to restart the climate control sys-
tem: in this way all previously stored operating conditions
are reset before switching off.
To restore automatic air distribution control after a man-
ual selection, press AUTO.
001-142 Delta 3ed gb 30-11-2009 11:21 Pagina 56