2010 JEEP GRAND CHEROKEE garage door opener

[x] Cancel search: garage door opener

Page 79 of 466

JEEP GRAND CHEROKEE 2010 WK / 3.G Owners Manual ▫Enable/Disable Parksense ............. 122
▫ Service Parksense ................... 122
▫ Cleaning Parksense .................. 122
▫ System Usage Precautions .............. 123
 Parkview

Page 128 of 466

JEEP GRAND CHEROKEE 2010 WK / 3.G Owners Manual Turning ParkViewOn or Off — Without
Navigation/Multimedia Radio
1. Press the “menu” hard key.
2. Select “system setup” soft key.
3. Enable or disable the rear camera feature by selecting

Page 129 of 466

JEEP GRAND CHEROKEE 2010 WK / 3.G Owners Manual Press the lens to turn these lights on. Press a second time
to turn the lights off.
The lights also turn on when a front door or rear door is
opened. The lights will also turn on when the UNLOCK
butto

Page 130 of 466

JEEP GRAND CHEROKEE 2010 WK / 3.G Owners Manual NOTE:HomeLink is disabled when the Vehicle Secu-
rity Alarm is active.
WARNING!
•Your motorized door or gate will open and close
while you are training the Universal Transceiver.
Do not train the t

Page 131 of 466

JEEP GRAND CHEROKEE 2010 WK / 3.G Owners Manual It is recommended that a new battery be placed in the
hand-held transmitter of the device being copied to
HomeLinkfor more efficient training and accurate
transmission of the radio-frequency signal.

Page 132 of 466

JEEP GRAND CHEROKEE 2010 WK / 3.G Owners Manual NOTE:After training a HomeLink channel, if the
garage door does not operate with HomeLink and the
garage door opener was manufactured after 1995, the
garage door opener may have rolling code. If so,

Page 133 of 466

JEEP GRAND CHEROKEE 2010 WK / 3.G Owners Manual 7. Return to the vehicle and press the programmed
HomeLinkbutton twice (holding the button for two
seconds each time). If the device is plugged in and
activates, programming is complete.
If the devic

Page 134 of 466

JEEP GRAND CHEROKEE 2010 WK / 3.G Owners Manual Then proceed with Step 4 under “Programming
HomeLink” earlier in this section.
Using HomeLink
To operate, press and release the programmed
HomeLinkbutton. Activation will now occur for the
trai
Page:   1-8 9-16 next >