2010 JEEP COMMANDER torque

[x] Cancel search: torque

Page 382 of 460

JEEP COMMANDER 2010 1.G Owners Manual Selection of Lubricant
Use only the manufacturer’s recommended fluid. Refer
to “Fluids, Lubricants, and Genuine Parts” in this section
for the correct fluid type.
Transfer Case
Fluid Level Check

Page 383 of 460

JEEP COMMANDER 2010 1.G Owners Manual Automatic Transmission
Selection of Lubricant
It is important that the proper lubricant is used in the
transmission to assure optimum transmission perfor-
mance. Use only the manufacturer’s recommen

Page 384 of 460

JEEP COMMANDER 2010 1.G Owners Manual CAUTION!
Do not use chemical flushes in your transmission as
the chemicals can damage your transmission compo-
nents. Such damage is not covered by the New
Vehicle Limited Warranty.
Fluid Level Check

Page 386 of 460

JEEP COMMANDER 2010 1.G Owners Manual CAUTION!
Be aware that if the fluid temperature is below 50°F
(10°C) it may not register on the dipstick. Do not add
fluid until the temperature is elevated enough to
produce an accurate reading.
7.

Page 443 of 460

JEEP COMMANDER 2010 1.G Owners Manual Fluid Type........................... 383
Special Additives ...................... 383
Torque Converter ...................... 254
Autostick ............................. 250
Auxiliary Electrical Outl

Page 458 of 460

JEEP COMMANDER 2010 1.G Owners Manual Tire Identification Number (TIN)............. 289
Tire Markings .......................... 286
Tire Safety Information .................... 286
Tires ............................ 76,294,439
Air Pressu
Page:   < prev 1-8 9-16