2010 JAGUAR XF Rear door

L
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XF
Windows
42
WindowsELECTRIC WINDOWS
1. Window switches:
The windows will ope rate for 5 minutes
after the engine is switched off, as long as
none of the doors are opened.
2. Rear window isolator.
If children are carried in the rear
seats, the isolator switch should
be used to prevent operation of the
windows.
3. Sunroof:
Roof movement can be halted at any time
by pressing the button again.
If the sunroof encounte rs resistance when
closing it will stop, and then open fully.
This is to prevent seri ous injury or damage
to the mechanism. •
With the roof closed, briefly press the
front of the switch to tilt the roof.
• With the roof closed, briefly press the
rear of the switch to open the roof.
• With the roof open, briefly press the
front of the switch to close fully.
• With the roof tilted, briefly press the
rear of the switch to close.
4. Rear screen sun blind.
5. Sunroof blind:
The blind will open automatically when the
roof is tilted or when the roof is fully
opened. The blind can be opened manually
when required, but can only be closed
when the sunroof is closed.

L
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XF
Garage door opener
48
Garage door openerGARAGE DOOR TRANSCEIVER
Do not use the transceiver with any
garage door opener that lacks the
safety stop and reverse feature as
required by safety standards.
When programming the transceiver to
a garage door opener or entry gate,
ensure the area is clear. This will
prevent potential harm or damage as
the gate or garage door will activate
during the programme.
This device may suffer from
interference if operate d in the vicinity of
a mobile or fixed station transmitter.
This interference is li kely to affect the
hand-held transmitter as well as the
in-car transceiver.
The door transceiver is located in the rear-view
mirror. It can be programmed to transmit the
radio frequencies of up to three different
transmitters, which can be used to operate
garage doors, entry gates, home lighting,
security systems or other radio frequency
operated devices.
Although this section mainly describes the
procedures for a garage door opener, it equally
applies to the previously mentioned
applications.
In some countries, this feature is also known
as the HomeLink® Universal Transceiver.
For further information, see 50,
INFORMATION AND ASSISTANCE .
BEFORE PROGRAMMING
When programming a device that may
require you to press and re-press the
hand-held transmitter (cycle), unplug
the device during the cycling process to
prevent possible motor failure.
For best results, fit a new battery to the
hand-held transmitter of the garage door
opener (or other device ) before programming.
If your garage door opener receiver (located in
the garage) is equippe d with an antenna,
ensure that the antenna is hanging straight
down.
PROGRAMMING
Ensuring that the engine is switched off:
1. Ensure that the ignition system is on.
2. Hold the end of the original garage door
opener hand-held transmitter 50 to
150 mm (2 to 6 inches) away from the
transceiver in the rear-view mirror, keeping
the indicator lamp in view.
3. Using both hands, simultaneously press
and hold both the chosen transceiver
button on the rear-view mirror, as shown
above, and the hand- held transmitter
button. Keep both but tons pressed. The
indicator lamp will flas h slowly at first and
then change to a fast flash. When the
indicator lamp flashes rapidly, release both
buttons. The rapid flashing lamp indicates
successful programming.

R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XF
Garage door opener
49
4. If, after 60 seconds, the indicator lamp
does not flash rapidly, release both the
transceiver and the hand-held transmitter
buttons and repeat th e procedure starting
with Step 2. Position the hand-held
transmitter at a different angle and/or
distance.
5. Press and hold the programmed garage
door opener button and observe the
indicator lamp.
•If the indicator is continuous,
programming is complete and your
device should operate when the garage
door opener button is pressed and held
for approximately 1 to 2 seconds and
then released.
• If the indicator lamp blinks rapidly for
two seconds and then illuminates
continuously, proceed with the
following programming instructions
for rolling code de vice equipment.
TO ERASE ALL PROGRAMMING
For first time programming, ensure that the
engine is switched off:
1.Ensure that the igniti on system is in
convenience mode (see 7, CONVENIENCE
MODE ).
2. Press and hold the two outer buttons on
the transceiver in the rear-view mirror.
Keep the buttons pressed until the
indicator lamp begins to flash (this will take
approximately 20 seconds), then release
the buttons.
All memories in the gara ge door opener have
now been cleared.
Note: Do not perform this procedure when
programming the addi tional garage door
opener buttons.
ROLLING CODE DEVICE EQUIPMENT
PROGRAMMING
Note: The assistance of a second person, may
make the following steps quicker and easier.
Once the button has been pressed there are
only 30 seconds in which to complete Step 3.
1. At the garage door opener receiver (motor
head unit) in the garage, locate the learn or
smart button/switch.
•The name of the but ton or switch may
vary between manufacturers.
2. Press and release the learn or smart
button.
3. Return to the vehicle and firmly press and
hold the programmed garage door opener
button for two seconds and release.
4. Repeat the press, hold, release sequence
three times to complete the programming
process.
The garage door opener in the rear-view mirror
should now activate the rolling code device.
REPROGRAMMING A SINGLE
GARAGE DOOR OPENER BUTTON
To programme a device to a previously
programmed button:
1. Press and hold the desired
pre-programmed garage door opener
button for at least 20 seconds, but no
longer than 30 seconds, until the indicator
lamp begins to flash.
2. Without releasing th e rear-view mirror
button, position the ha nd-held transmitter
approximately 50 to 150 mm (2 to 6
inches) away from the transceiver in the
rear-view mirror, keeping the indicator
lamp in view.
3. Carry out Step 3 of Programming .

L
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XF
Garage door opener
50
ENTRY GATE PROGRAMMING
The technology of some entry gates requires
you to press and re-press (cycle) the hand-held
transmitter button every two seconds during
programming.
Continue to press and hold the desired
rear-view mirror button while you cycle your
hand-held transmitter until the indicator lamp
flashes rapidly.
INFORMATION AND ASSISTANCE
It is recommended that when you sell or
dispose of the vehi cle, the programmed
transceiver buttons be erased for
security purposes.
For information on the range of available
compatible products or accessories, or for
assistance, you should contact your Dealer/
Authorised Repairer.
You can also contact the supplier’s helpline on
0 0800 04663 5465. This toll-free number can
be called from anywhere within Europe. No
separate country code is required (the first zero
is not required when calling from within
Germany).
Contact can also be made via the internet. The
website addres s is www.eurohomelink.com.
The e-mail address is
[email protected].
Note: Keep the original transmitter for future
use or programming procedures if, for
example, you purchase a new vehicle.
Note: The manufacturer is not responsible for
any radio or TV interference caused by
unauthorised modifications to this equipment.
Such modifications c ould void the user’s
authority to operate the equipment.

R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XF
Storage compartments
73
5. Front door stowage.
6. Auxiliary power sockets.
Only use approved accessories and
always run the engine when using
accessories for a prolonged period.
7. Map pockets.
8. Rear door stowage.

R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XF
Technical specifications
181
REMOTE KEY FOB TRANSMITTER LOCATIONS
1. Cabin front transmitter.
2. Cabin rear transmitter.
3. Front exterior door handle transmitters.
4. Rear exterior door ha ndle transmitters.
5. Luggage compartment in terior transmitter.
6. Luggage compartment exterior
transmitter.
7. Keyless vehicle module.
Any person fitted with an implanted
medical device should ensure that the
device is kept at a distance of at least
22 cm (8.7 inches) away from any
transmitter mounted in the vehicle.
This is to avoid any possibility of
interference between the system and
device.

R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XF
Fuses
191
PASSENGER COMPARTMENT FUSE BOX
Fuse No Rating
(amps) Fuse
Colour Circuit
F1 - - -
F2 - - -
F3 20A Yellow Driver’s seat adjustment.
F4 20A Yellow Driver’s seat adjustment.
F5 - - -
F6 - - -
F7 - - -
F8 20A Yellow Front passenger's seat adjustment.
F9 20A Yellow Front passenger's seat adjustment.
F10 20A Yellow Left-hand rear door controls.
F11 20A Yellow Right-hand rear door controls.
F12 - - -
F13 10A Red Steering column adjust.
F14 - - -
F15 - - -
F16 5A Tan Sunblind.
F17 - - -
F18 - - -
F19 - - -
F20 5A Tan Remote control receiver.
F21 5A Tan Foot brake.
F22 5A Tan Electric parking brake.
F23 5A Tan Driver’s seat. Audio system. Auto headlamps. Upper centre console switches.
F24 10A Red Front passenger seat. El ectric windows. Mirror adjustment.
F25 20A Yellow Driver’s heated/climate seat.
F26 15A Blue Trailer power socket. Road pricing system.
F27 20A Yellow Front passenger’s heated/climate seat.
F28 15A Blue Auxiliary power sockets.
F29 20A Yellow Keyless entry system.

R
english-en (10, 18, 21 & 25)
Index
213
warning lamps . . . . . . . . . . . . . . . . . . . . 51side lights . . . . . . . . . . . . . . . . . . . . . 54
TPMS (Tyre pressure monitoring system) . . . . . . . . . . . . . . . . . . . . . 53
wiper detection . . . . . . . . . . . . . . . . . . . 37
Leather cleaning . . . . . . . . . . . . . . . . . . . 166
License plate bulb . . . . . . . . . . . . . . . . . . 163
Lights condensation . . . . . . . . . . . . . . . . . . . . . 38
controls . . . . . . . . . . . . . . . . . . . . . . . . . 36
Limp home mode . . . . . . . . . . . . . . . . . . . 82
List soft key (navigation) . . . . . . . . . . . . . 142
Load securing . . . . . . . . . . . . . . . . . . . . . . 68
Loading DVDs . . . . . . . . . . . . . . . . . . . . . 125
Locking
alarm sensor faults . . . . . . . . . . . . . . . . 11
automatic relocking . . . . . . . . . . . . . . . . 11
confirmation . . . . . . . . . . . . . . . . . . . . . . 9
door locks and release leve rs . . . . . . . . . 9
double locking . . . . . . . . . . . . . . . . . . . . . 9
drive away . . . . . . . . . . . . . . . . . . . . . . . . 7
global closing . . . . . . . . . . . . . . . . . . . . 10
keyless. . . . . . . . . . . . . . . . . . . . . . . . . . 10
mislock . . . . . . . . . . . . . . . . . . . . . . . . . 10
Locking and unlocking alarmperimeter . . . . . . . . . . . . . . . . . . . . . . 11
sensor faults . . . . . . . . . . . . . . . . . . . 11
passive arming . . . . . . . . . . . . . . . . . . . 11
single locking. . . . . . . . . . . . . . . . . . . . . . 9
unlocking . . . . . . . . . . . . . . . . . . . . . . . . . 4
Locking column . . . . . . . . . . . . . . . . . . . . . 75
Lubricants
specifications. . . . . . . . . . . . . . . . . . . . 175
Luggage anchor points . . . . . . . . . . . . . . . . . . . . 68
Luggage compartment closing . . . . . . . . . . . . . . . . . . . . . . . . . . 67
fuse box . . . . . . . . . . . . . . . . . . . . . . . . 192
opening . . . . . . . . . . . . . . . . . . . . . . . . . 67M
Main beam (auto) . . . . . . . . . . . . . . . . . . . . 38
Maintenance
blocked washer jets . . . . . . . . . . . . . . . 162
boost starting connecting cables . . . . . . . . . . . . . . . 183
disconnecting cables. . . . . . . . . . . . . 183
brake fluid check . . . . . . . . . . . . . . . . . . 171
capacities . . . . . . . . . . . . . . . . . . . . . . . 179
changing a fuse. . . . . . . . . . . . . . . . . . . 188
checking the tyre pressures . . . . . . . . . 185
checking the tyre pressures after a repair . . . . . . . . . . . . . . . . . . . . . . . 150
cleaning
polishing . . . . . . . . . . . . . . . . . . . . . . 165
removing grease and tar . . . . . . . . . . 165
removing stains . . . . . . . . . . . . . . . . 166
cleaning alloy wheels . . . . . . . . . . . . . . 164
cleaning glass . . . . . . . . . . . . . . . . . . . . 165
cleaning parking sensors . . . . . . . . . . . . 93
cleaning rear screen . . . . . . . . . . . . . . . 165
closing the bonnet . . . . . . . . . . . . . . . . 160
coolant level checking . . . . . . . . . . . . . . 170
daily checks . . . . . . . . . . . . . . . . . . . . . 158
DPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
engine compartment . . . . . . . . . . . . . . . 161
exterior cleaning . . . . . . . . . . . . . . . . . . 164
fuse box (luggage compartment) . . . . . 192
interior cleaning . . . . . . . . . . . . . . 165, 166
jump starting . . . . . . . . . . . . . . . . . . . . 183
label locations . . . . . . . . . . . . . . . . . . . . 200
leather cleaning. . . . . . . . . . . . . . . . . . . 166
lubricants and fliud sp ecifications. . . . . 175
number plate bulb . . . . . . . . . . . . . . . . . 163
paintwork repair . . . . . . . . . . . . . . . . . . 164
smart key battery changing. . . . . . . . . . . . 8
sunroof wind deflector . . . . . . . . . . . . . 165
weekly checks . . . . . . . . . . . . . . . . . . . . 158
Manual head restraints . . . . . . . . . . . . . . . . 21
Map (navigation system) . . . . . . . . . . . . . 140
Map split screen (navigations system) . . . 137
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 inhibited . . . . . . . . . . . . . . . . . . . . . . . . 125