2010 INFINITI FX garage door opener

When the switch is in the DOOR positionA, the
light illuminates while the lift gate is opened.
When the lift gate is closed, the light will turn
off.
When the switch is in the OFF position
B, the
light will turn off.
The light will turn off after 30 minutes when the
lights remain illuminated to prevent the battery
from becoming discharged. HomeLink
Universal Transceiver provides a
convenient way to consolidate the functions of
up to three individual hand-held transmitters
into one built-in device.
HomeLink Universal Transceiver:
● Will operate most Radio Frequency (RF) de-
vices such as garage doors, gates, home and
office lighting, entry door locks and security
systems.
● Is powered by your vehicle’s battery. No
separate batteries are required. If the vehi-
cle’s battery is discharged or is discon-
nected, HomeLink will retain all program-
ming.
Once HomeLink Universal Transceiver is pro-
grammed, retain the original transmitter for fu-
ture programming procedures (Example: new ve-
hicle purchases). Upon sale of the vehicle, the
programmed HomeLink Universal Transceiver
buttons should be erased for security purposes.
For additional information, see “PROGRAMMING
HomeLink” later in this section.
WARNING
● Do not use HomeLink Universal Transceiver
with any garage door opener that lacks
safety stop and reverse features as required
by federal safety standards. (These stan-
dards became effective for opener models
manufactured after April 1, 1982.) A garage
door opener which cannot detect an object in
the path of a closing garage door and then
automatically stop and reverse, does not
meet current federal safety standards. Using
a garage door opener without these features
increases the risk of serious injury or death.
● During programming procedure, your garage
door or security gate may open or close.
Make sure that people and objects are clear
of the garage door, gate, etc. that you are
programming.
● Your vehicle’s engine should be turned off
while programming HomeLink Universal
Transceiver.
SIC2925
CARGO LIGHT HOMELINKUNIVERSAL TRANSCEIVER
2-60Instruments and controls
—
—
07/30/09—pattie


PROGRAMMING HOMELINK
To program your HomeLinkUniversal Trans-
ceiver to operate a garage door, gate, or entry
door opener, home or office lighting, you need
to be at the same location as the device. Note:
Garage door openers (manufactured after 1996)
have “rolling code protection”. To program a
garage door opener equipped with “rolling code
protection”; you will need to use a ladder to get
up to the garage door opener motor to be able
to access the “smart or learn” program button.
1. To begin, push and hold the 2 outer HomeLink buttons (to clear the memory)
until the indicator light
Ablinks (after 20
seconds). Release both buttons.
2. Position the end of the hand-held trans- mitter 1-3 inches away from the
HomeLink surface. 3. Using both hands, simultaneously push
and hold both the HomeLink button you
want to program and the hand-held trans-
mitter button.
DO NOT release the buttons until step 4
has been completed.
SIC3182SIC3183
Instruments and controls2-61
—
—
07/30/09—pattie


4. Hold down both buttons until the indica-tor light on HomeLink flashes, changing
from a “slow blink” to a “rapid blink”.
This could take up to 90 seconds. When
the indicator light blinks rapidly, both
buttons may be released. The rapidly
flashing light indicates successful pro-
gramming. To activate the garage door or
other programmed device, push and hold
the programmed HomeLink button - re-
leasing when the device begins to acti-
vate.
5. If the indicator light on HomeLink blinks
rapidly for two seconds and then turns
solid, HomeLink has picked up a “rolling
code” garage door opener signal. You will
need to proceed with the next steps to
train HomeLink, completing the pro-
gramming may require a ladder and an-
other person for convenience.
6. Push and release the program button located on the garage door opener’s mo-
tor to activate the “training mode”. This
button is usually located near the an-
tenna wire that hangs down from the
motor. If the wire originates from under a
light lens, you will need to remove the
lens to access the training button.NOTE:
Once you have pushed and released the
training button on the garage door opener’s
motor and the “training light” is lit, you have
30 seconds in which to perform step 7. For
convenience, use the help of a second person
to assist when performing this step.
7. Quickly (within 30 seconds of pushingand releasing the garage door opener
training button) and firmly push and re-
lease the HomeLink button you’ve just
programmed. Push and release the
HomeLink button up to three times to
complete the training.
8. Your HomeLink button should now be
programmed. To program the remaining
HomeLink buttons for additional door or
gate openers, follow steps 2 through 8
only.
NOTE:
Do not repeat step 1 unless you want to “clear”
all previously programmed HomeLink buttons.
If you have any questions or are having diffi-
culty programming your HomeLink buttons,
please refer to the HomeLink web site at:
www.homelink.com or call 1-800-355-3515.
PROGRAMMING HOMELINK FOR
CANADIAN CUSTOMERS
Prior to 1992, D.O.C. regulations required hand-
held transmitters to stop transmitting after 2
seconds. To program your hand-held transmit-
ter to HomeLink, continue to push and hold
the HomeLink button (note steps 2 through 4
under “Programming HomeLink”) while you
push and re-push (“cycle”) your hand-held
transmitter every 2 seconds until the indicator
light flashes rapidly (indicating successful pro-
gramming).
NOTE:
If programming a garage door opener, etc., it is
advised to unplug the device during the “cy-
cling” process to prevent possible damage to
the garage door opener components.
OPERATING THE HOMELINK
UNIVERSAL TRANSCEIVER
HomeLink Universal Transceiver (once pro-
grammed) may now be used to activate the
garage door, etc. To operate, simply push the
appropriate programmed HomeLink Universal
Transceiver button. The red indicator light will
illuminate while the signal is being transmitted.
2-62Instruments and controls
—
—
07/30/09—pattie


Checking engine coolant level......8-9
Checking engine oil level .........8-10
Engine block heater ............5-81
Engine compartment check locations . . . 8-6
Engine cooling system ...........8-9
Engine oil .................. 8-10
Engine oil and oil filter
recommendation ..............9-6
Engine oil replacement indicator .....2-25
Engine oil viscosity .............9-6
Engine serial number ...........9-12
Engine specifications ............9-8
Engine start operation indicator .....2-23
If your vehicle overheats .........6-10
Starting the engine ............5-12
Engine coolant temperature gauge ......2-7
Entry/exit function, Automatic drive
positioner ................... .3-25
Event Data Recorders (EDR) ..........9-31
Exhaust gas (carbon monoxide) ........5-2
F
F.M.V.S.S./C.M.V.S.S. certification label . . .9-12
Filter Air cleaner housing filter .........8-19
Changing engine oil and filter ......8-11
Flashers
(See hazard warning flasher switch) .....2-40
Flat tire ..................... .6-2
Flat towing .................. .9-27
Floor mat cleaning ............... .7-5
Fluid Automatic transmission fluid (ATF) . . . .8-13
Brake fluid ................. 8-14Capacities and recommended fuel/
lubricants
..................9-2
Engine coolant ...............8-9
Engine oil .................. 8-10
Power steering fluid ............8-13
Window washer fluid ...........8-14
FM-AM-SAT radio with Compact Disc (CD)
player ..................... .4-61
Fog light switch ............... .2-40
Forward Collision Warning (FCW) system . . .5-61
Front passenger air bag and status light . .1-47
Front power seat adjustment ..........1-2
Front seat, Front seat adjustment .......1-2
Fuel Capacities and recommended fuel/
lubricants .................. .9-2
Fuel

economy ............... 5-68
Fuel economy information (display) ....4-9
Fuel octane rating .............9-4
Fuel recommendation ...........9-4
Fuel-filler cap ................ 3-18
Fuel-filler door ............... 3-18
Gauge ....................2-8
Fuses ..................... .8-22
Fusible links ................. .8-22
G
Garage door opener, HomeLink Universal
Transceiver .................. .2-60
Gascap .................... .3-18
Gauge ...................... .2-5
Gauge Engine coolant temperature gauge . . . .2-7
Fuel gauge ..................2-8 Odometer
..................2-6
Speedometer ................2-6
Tachometer .................2-7
Trip computer ............... 2-27
General maintenance ..............8-2
Glove box ................... .2-48
H
Hands-free phone system, Bluetooth
(with navigation system) ...........4-104
Hands-free phone system, Bluetooth
(without navigation system) .........4-115
Hazard warning flasher switch . . . . . . . .2-40
Head restraints ................. .1-6
Headlights Aiming control (See adaptive front
lighting system (AFS)) ...........2-38
Bulb replacement ............. 8-26
Headlight switch .............. 2-36
Xenon headlights ............. 2-35
Headphones (See INFINITI mobile
entertainment system) ........4-94 , 4-102
Heater Automatic climate control .........4-40
Engine block heater ............5-81
HomeLink Universal Transceiver . . . . . .2-60
Hood release ................. .3-16
Hook Coat
hooks................ .2-49
Luggage hook ............... 2-50
Horn ...................... .2-41
10-3
—
—
10/19/09—tbrooks