2010 Hyundai Accent heating

1FEATURES OF YOUR HYUNDAI
106
This is used to select fresh outside air or recirculating inside air.FreshRecirculation
With the "
" mode selected, air en-
ters the vehicle from outside and is heated or cooled according to the other functions selected. With the "
" mode selected, air from
within the passenger compartment is drawn through the heating system and heated or cooled according to the otherfunctions selected.
HEATING AND VENTILATION
B670A02A-GAT
(If Installed)
1. Temperature control
2. Air conditioning switch
3. Air intake control switch
4. Air flow control
5. Fan speed control B670B01A-AAT Fan Speed Control (Blower Control) This is used to turn the blower fan on or off and to select the fan speed. This blower fan speed, and thereforethe volume of air delivered from the system, may be controlled manually by setting the blower control betweenthe "1" and "4" positions. B670C03A-AAT Air Intake Control Switch
B670A01MC-D
OMC025083B670C02MC

1
FEATURES OF YOUR HYUNDAI
107107107
Face-Level
Selecting the "Face" mode will cause air to be discharged through the facelevel vents.
B670D03MC-GAT Air Flow Control This is used to direct the flow of air. Air can be directed to the floor, instrument panel outlets, or windshield. Five sym-bols are used to represent Face, Bi- Level, Floor, Floor-Defrost and Defrost air position.
B670D02MC
B670D01MC-D
NOTE: It should be noted that prolonged operation of the heating system in "
" mode will give rise to misting
of the windshield and side windows and the air within the passenger com- partment will become stale. In addi-tion prolonged use of the air condi- tioning with the "
" mode selected
may result in the air within the pas- senger compartment becoming ex- cessively dry.

1
FEATURES OF YOUR HYUNDAI
109109109
Defrost-Level
Air is discharged through the wind- shield defroster nozzle, side defrosternozzle, side ventilator.
B670D06MC
HEATING CONTROLS
B690A01MC-GAT
B670E02A-AAT Temperature Control This control is used to adjust the degree of heating or cooling desired. For normal heating operation, set the air intake control to the fresh air ( ) position and the air flow control to the floor ( ) position.For faster heating, the air intake con- trol should be set in the recirculate ( ) position.If the windows fog up, set the air flow control to the defrost ( ) position. (Push the A/C button to turn the airconditioning system on and set the air intake control to the fresh air ( ) position.)For maximum heat, move the tem- perature control to "Warm".
Cool
Warm
B670E01MC B690A01MC-D

1FEATURES OF YOUR HYUNDAI
110DEFROSTING/DEFOGGINGVENTILATION
B720A01MC-GAT Use the heating/ventilation system to defrost or defog the windshield: To remove interior fog on the windshield:
o Set the air flow control to the defrost(
) position. (Push the A/C button
to turn the air conditioning system on and set the air intake control to thefresh air ( ) position.)
o Set the temperature control to the
desired position.
o Set the fan speed control between "1" and "4" position.
B710A01A-AAT
To operate the ventilation system:
o Set the air intake control to "Fresh"
mode ( ).
o To direct all intake air to the dash- board vents, set the air flow control to the (
) position.
o Adjust the fan speed control to the desired speed.
o Set the temperature control between "Cool" and "Warm".
B710A01MC-D B720A01MC-D
BI-LEVEL HEATING
B700A02A-AAT
Your Hyundai is equipped with bi-level heating controls. This makes it pos- sible to have cooler air from the dash- board vents and warmer air from thefloor outlets at the same time. To use this feature:
o Set the air intake control to the fresh air ( ) position.
o Set the air flow control at the bi-level
( ) position.
o Adjust the fan speed control to the desired speed.
o Set the temperature control between "Cool" and "Warm".
B700B01MC-D

1
FEATURES OF YOUR HYUNDAI
111111111
To remove the frost or exterior fog on the windshield:
o Set the air flow control to the defrost (
) position. (Push the A/C button
to turn the air conditioning system on and set the air intake control to the fresh air ( ) position.)
o Set the temperature control to warm.
o Set the fan speed control to position "3" or "4".
B720A02MC-DNOTE:
When the A/C is operated continu-ously on the floor-defrost level ( )
or defrost level ( ), it may cause
fog to form on the exterior wind- shield. If this occurs, set the air
flow control to the face level posi-
tion ( ) and fan speed control to
the low position.B730A01L-AAT
Operation Tips
oTo keep dust or unpleasant fumes from entering the car through the
ventilation system, temporarily set the air intake control at the ( )
position. Be sure to return the control
to the ( ) position when the
irritation has passed to keep fresh air
in the vehicle. This will help keep the
driver alert and comfortable.
oAir for the heating/cooling system is drawn in through the grilles justahead of the windshield. Care should
be taken that these are not blocked
by leaves, snow, ice or other ob-
structions.
oTo prevent interior fog on the wind- shield, set the air intake control to
the fresh air ( ) position, fan
speed to the desired position, turn on the air conditioning system, and ad- just temperature control to desired
temperature.

1FEATURES OF YOUR HYUNDAI112
B740B01MC-AAT
Air Conditioning Operation
(Cooling)
To use the air conditioning to cool the
interior:
oTurn on the fan control switch.
oPush the air conditioning switch by pushing in on the switch.
The air conditioning indicator light
should come on at the same time.
oSet the temperature control to "Cool". ("Cool" provides maximum cooling.
The temperature may be moderated
by moving the control toward "Warm".) oAdjust the fan control to the desired
speed. For greater cooling, turn the
fan control to one of the higher speeds
or temporarily select the ()posi-
tion on the air intake control.B740B01MC-D
AIR CONDITIONING SYSTEM
B740A01MC-D
B740A01A-AAT
(If Installed)
Air Conditioning Switch
The air conditioning is turned on by pushing the A/C button on the heating/ air conditioning control panel.

1
FEATURES OF YOUR HYUNDAI113113113
For dehumidified heating: oTurn on the fan control switch.
oTurn on the air conditioning switch. The air conditioning indicator light
should come on at the same time.
oSet the air intake control switch to the fresh air (
) position.
oAdjust the fan control to the desired
speed.
oFor more rapid action, set the fan at one of the higher speeds.
oAdjust the temperature control to provide the desired amount of
warmth.
B740C01MC-AAT
De-Humidified HeatingB740C01MC-D
B740D01A-AAT
Operation Tips
oIf the interior of the car is hot when
you first get in, open the windows for
a few minutes to expel the hot air.
oWhen you are using the air condi-
tioning system, keep all windows
closed to keep hot air out.
oWhen moving slowly, as in heavy traffic, shift to a lower gear.
This increases engine speed, which in turn increases the speed of the air conditioning compressor.
oOn steep grades, turn the air condi- tioning off to avoid the possibility of
the engine overheating.
oDuring winter months or in periods when the air conditioning is not usedregularly, run the air conditioning
once every month for a few min-utes.
This will help circulate the lubricants
and keep your system in peak oper-
ating condition.

1FEATURES OF YOUR HYUNDAI114AUTOMATIC HEATING AND COOLING CONTROL SYSTEM
B970A01Y-AAT
(If lnstalled)
Your Hyundai is equipped with an auto- matic heating and cooling control sys-
tem controlled by simply setting the desired temperature. B970B01MC-GAT
Heating and Cooling Controls
B970B01MC
6
.A UTO (Automatic Control) Switch
7
.D isplay Window
8
.A ir Flow Control Switch
9
.O FF Switch
1
.T emperature Control
2
.A ir Conditioning Switch
3
.A ir lntake Control Switch
4
.D efroster Switch
5
.B lower Fan Control