2010 HONDA INSIGHT Technology Reference Guide

Check your owner’s manual for additional information and instructions.Advanced AudioComponents
Connecting and Beginning Play
1. Press the OPEN button.
PC Card Instructions
2. If necessary, insert your PC card into a PC
card adapter.4. Press the AUDIO button beside the screen to
show the audio display. Operate the PC card
using your vehicle’s audio unit.
3. Insert the PC card into the slot and press the
CLOSE button.
CLOSE
Button
10 Insight TRG Base_:Base 2/11/2009 9:06 AM Page 6 2010 Insight

Voice Command/HFL/Navigation
Using the Voice Command System
• Reduce all background noise.
• Adjust the dashboard and side vents so airdoes not blow against the microphone in the
ceiling.
• Close the windows.
NAVI BACK button:
Use to cancel a command
or return to the previous
screen. HFL BACK button:
Use to end a call, go
back to the previous
command, or cancel
an operation.
NAVI TALK button:
Use to give navigation,
audio, or climate
control commands.
HFL TALK button:
Use to give an HFL
command and to
answer an incoming
call.
Voice Command
A list of navigation, audio, and climate control voice commands is in the\
navigation system manual.
Voice Control Tips:
• Press and release the button, wait for a beep,
then give a command.
• To hear a list of available commands, say “Help” at any time after you press and release
the button.
• Always speak in a clear, natural voice.
10 Insight TRG Base_:Base 2/11/2009 9:06 AM Page 7 2010 Insight

Check your owner’s manual for more information and instructions.
Bluetooth® HandsFreeLink® (if equipped)
Pairing Your Phone
Say “Pair.”HFL will ask you to name the phone. Say
“Mary’s phone.”
YES
NO Enable “Discovery” or “Search” mode on
your Bluetooth-compatible phone.
1
Say “Phone setup.” 2
3
HFL will begin searching for your phone.
(On some phones, you may need to search
for a Bluetooth device.) When HFL finds
your phone, your phone will prompt you to
connect to HFL.
Your phone is now paired to HFL. The
system will return to the main menu.Enter the four-digit pairing code (from
step 4) on your phone.
4
5
6
Before pairing your phone, make sure it
is Bluetooth-compatible. For more
information or troubleshooting, call HFL
consumer support at (888) 528-7876,
visit
handsfreelink.honda.com, or see
your owner’s manual for details.
NO YESRepeat step 5.
HFL will give you a four-digit pairing
code. For example, “1-2-3-4.” This code
will also appear on the MID.
Was connection successful? Was pairing successful?
Press and release the HFL TALK button before giving each command.
10 Insight TRG 7ab_:ExtraPages.qxd 2/11/2009 9:07 AM Page a7 2010 Insight

Making a Call
1. Press the HFL TALK
button.
2. Say “Call 310-555-1234.”
Receiving a Call
“INCOMING
CALL” and the
phone number
will appear on
the MID.
Press the
HFL TALK
button to
accept the
call.
Press the
HFL BACK
button to
decline the
call.
3. Press the HFL TALK button and say “Call” or
“Dial” to continue.
4. The call is connected; allcommunications will be
heard through the speakers.
10 Insight TRG 7ab_:ExtraPages.qxd 2/11/2009 9:07 AM Page b7 2010 Insight

Say “City” (or “Change state” if
necessary).Say “Display menu.”
1
Say “Address.”2
3
A list of city names will appear. Say
the number listed next to the city you
want to select.
Say the street name. Do not include
the direction (N, S, E, W) or type
(St., Ave., Blvd., etc.).
4
6
Say the name of the city you want, or
say “Current city” to select the city
currently shown.
5
A list of street names will appear. Say
the number listed next to the street
you want to select.
Say the entire street address number.
For example, “1-2-5-0.”7
8
The system will calculate the route
and display the “Calculate route to”
screen. Say “OK” to set the route.9
Navigation(if equipped)
Check your owner’s manual for more information and instructions.
Entering a Destination Using Voice Control
Press and release the NAVI TALK button before giving each command.
10 Insight TRG 7ab_:ExtraPages.qxd 2/11/2009 9:07 AM Page c7 2010 Insight

Entering a Destination Using the “Find Nearest” Command
Try these simple steps to find a nearby point of interest, such as a gas station, movie theater, or restaurant.
1. Say “Find nearest ATM.”
2. A list of the nearest ATMs in your areawill be displayed by shortest distance to
destination. 3. Say the number of the destination you want.
4. The system will calculate the route and
display the “Calculate route to” screen.
Say “OK” to set the route.
Press and release the NAVI TALK button before giving each command.
10 Insight TRG 7ab_:ExtraPages.qxd 2/11/2009 9:07 AM Page d7 2010 Insight

Check your owner’s manual for additional information and instructions.Voice Command/HFL/Navigation
“Unverified” Road
“Verified” Road
General CommandsAccepted on map screen
• Display menu
• Display setup
• Display information
• Display audio screen
• Go home
Accepted on map screen (after a
destination has been entered)
• How long/far to the destination?
• Display destination
• Display entire routeDisplay CommandsAccepted on map screen
• Display or hide (choose one):
- ATM/gas station/restaurant/etc.
• Display north up/heading up
• Zoom in/out
Find Nearest CommandsAccepted on map screen
• Find nearest (choose one): - Mexican restaurant
- Gas station
-ATM
- Honda dealer
Help CommandsAccepted on most screens
• Help (The system reads and lists all available commands for the current screen.)
• Voice command help (The system reads and lists all navigation, audio, setup, and
climate control commands.)Setup CommandsAccepted on the setup screen
• Brightness up/down
• Volume up/down/min/max/off
• Guidance prompts min/normal/max
Audio CommandsAccepted on most screens
• Radio on/off
• Radio # FM (# = frequency)
• Radio preset 1/2/3/4/5/6
• CD play
• AUX playClimate Control CommandsAccepted on most screens
• Air conditioner on/off
• Rear defrost on/off
• Climate control recirculate/fresh air
• Fan speed up/down
• Temperature # degrees (# = 57–87)
• Temperature up/down
• Temperature max hot/cold
Commonly Used Voice Commands
Navigation
Commands
Information Audio/
Climate Control
10 Insight TRG Back Inside_:Inside Back 2/11/2009 9:07 AM Page 8 2010 Insight

About This Technology Reference Guide
This Technology Reference Guide has been prepared to help you
get quickly acquainted with your new Honda, and to provide refer-
ence instructions on driving controls and convenience items.
However, this guide is not intended as a substitute for the
Owner’s Manual.For complete information on operating the
vehicle safely, please refer to the Owner’s Manual.
As with the Owner’s Manual, this guide covers all models of the
Honda Insight. Therefore, you may find descriptions of
equipment and features that are not on your particular model.
Safety Reminder
Your vehicle is equipped with airbags. Airbags do not replace
your seat belts; they add to the protection offered by seat belts.
Airbags can help protect you in some types of collisions, but they
do not provide protection in all collisions.
Always make sure you and your passengers wear seat belts, and
that young children are properly secured in a child seat or
booster in the rear seat. Never place an infant seat in the front
passenger’s seat as the force of a deploying airbag can seriously
injure an infant.
31TM8Q00
00X31-TM8-Q001 2010 Honda Insight Technology Reference Guide©2009 American Honda Co., Inc. -All Rights Reserved
Printed in U.S.A.
Fuel Recommendation
Use only unleaded gasoline of
87 octane or higher.
Some gasoline in North America contains MMT, a manganese-based
fuel additive. Prolonged and consistent
use of gasoline containing MMT can
deteriorate your vehicle’s performance,
fuel economy, and the emissions
control system. Always use MMT-free
gasoline if alternatives exist. Failures
caused by use of gasoline containing
MMT may not be covered under
warranty.
For further important information on fuel and lubricants for your car and
information on gasoline that does
not contain MMT, contact your
dealer or visit Owner Link at
www.hondacars.com.
2010_TRG_US.qxd:QSG_US.qxd 4/13/09 5:05 PM Page 12