2010 HONDA ELEMENT Technology Reference Guide

2010
Technology Reference Guide
Element
2010_TRG_US.qxd:QSG_US.qxd 4/13/09 5:05 PM Page 11

Indicators/InfoDisplay/TPMS
Instrument Panel Indicators
Indicators briefly appear with each engine start. Red and amber indicators are most critical. Blue and green indicators are used for general information.
DRL
ABS (anti-lock brake system)
DRL (daytime running lights)
Malfunction lamp (check engine light)
TPMS (tire pressure monitoring system)
VSA (vehicle stability assist)
Malfunction Indicators:If an indicator remains on, there may be a problem; see your dealer.
Charging system
Low oil pressure
SRS (supplemental restraint system)
Low brake fluid
10 Element TRG_Inside Front:Inside Cvr 8/24/2009 2:46 PM Page 1
2010 Element

On/Off Indicators
Condition Indicators:Action needed by driver.
PASSENGERAIRBAGOFF
SIDE AIRBAG OFF
Blinks: VSA activated Solid: VSA off
CRUISE CONTROL on
CRUISE MAIN on
Immobilizer Flashes: improperly coded key; use correct key
Headlights on
Turn signals/hazards on
High beams on
Seat belt reminder: Fasten seat belt(s)
Low fuel: Refill
Low tire pressure: Add air
Maintenance minder: Make appointmentDoor/Tailgate open:Close door(s) / tailgate
PASSENGER AIRBAGOFF (above audio panel)
10 Element TRG_1ab:ExtraPages.qxd 8/26/2009 10:24 AM Page a1
2010 Element

Information DisplayConsists of several displays that provide you with useful information.
When you start the engine, the information display shows your last active selection from theprevious drive cycle.
To toggle between the different displays, pressand releasethe select/reset knob repeatedly.
Information DisplaysAccessing the Information Display
Oil life, Outside temperature*
Trip B, Outsidetemperature*
Trip A, Outsidetemperature*
Odometer, Outsidetemperature*
* if equipped
10 Element TRG_1ab:ExtraPages.qxd 8/26/2009 10:24 AM Page b1
2010 Element

Indicators/InfoDisplay/TPMS
Tire Pressure Monitoring System (TPMS)
Each tire valve stem contains a TPMS sensor.
When the tire pressure drops significantly below recommended levels,the low tire pressure indicator comes on.
Visually inspectthe tires and usea tire air pressuregauge to check which tire(s) have low pressure.
How It WorksWhat to Do
Inflatethe tire(s) to the recommended pressureslisted on the label on the driver’s doorjamb.
INSPECT
Monitors the vehicle’s tire pressures.
and
10 Element TRG_Base:Base 8/26/2009 10:23 AM Page 2
2010 Element

Voice Command/Navigation
Using the Voice Command System
• Reduce all background noise. • Adjust the dashboard and sidevents away from the microphone inthe ceiling.• Close the windows.
Voice Command (if equipped)
To reduce driver distraction, use voice commands for navigation and audio functions. A full list of thesecommands is in the navigation system manual.
Voice Command Tips:
• Press and release the NAVI Talk button, wait for a beep, then give a command.• For a list of available navigation commands, press andrelease the NAVI Talk button and say “Help.”• Speak in a clear, natural voice.
NAVI Talk button: Give navigation andaudio commands.
NAVI Back button: Cancel a command orreturn to the previousscreen.
10 Element TRG_Base:Base 8/26/2009 10:23 AM Page 3
2010 Element

Navigation(if equipped)
Say “City” (or “Change state” if necessary).
Say “Display menu.”1
Say “Address.”2
3
A list of city names appears. Say the number listed next to the city you want to select.
Say the street name. Do not include the direction (N, S, E, W) or type (St., Ave., Blvd., etc.).
4
6
Say the name of the city you want, or say “Current city” to select the city currently shown.
5
A list of street names appears. Say the number listed next to the street you want to select.
Say the entire street address number. For example, “1-2-5-0.”
7
8
The system calculates the route and displays the “Calculate route to” screen. Say “OK” to set the route.
9
Entering a Destination Using Voice Commands
Press and release the NAVI Talk button before you give a command.
Note:Entering destinations can also be done manuallyfrom the Menu screen.
10 Element TRG_3abc:ExtraPages.qxd 8/24/2009 2:47 PM Page a3
2010 Element

1. Say“Find nearest ATM.”
2. A list of the nearest ATMs aredisplayed by shortest distance to destination.
3. Saythe number you want to select.
4. The system calculates the route anddisplays the “Calculate route to” screen.Say“OK”to set the route.
Press and release the NAVI Talk button before you give a command.
Entering a Destination Using the “Find Nearest” Command Try these simple steps to find a nearby point of interest, such as a gas station, movie theater, restaurant, etc.
10 Element TRG_3abc:ExtraPages.qxd 8/24/2009 2:47 PM Page b3
2010 Element