2010 HONDA ACCORD SEDAN Owner's Manual (in English)

µ
µ
Bluetooth
If equipped
handsf reelink.honda.
com
www.honda.ca,
HandsFreeLink(HFL)
allows you to place and receive
phone calls using voice commands,
without handling your cell phone.
To use HFL, you need a Bluetooth-
compatible cell phone. For a list of
compatible phones, pairing
procedures, and special f eature
capabilities:
In the U.S., visit
or call (888) 528-7876.
In Canada, visitor call
(888) 9-HONDA-9.
Press and
release to give a command or answer
a call.
Press and
release to end a call, go back to the
previous command, or cancel the
command.
Using HFL
HFL Talk button
HFL Back button
HFL Buttons
BluetoothHandsFreeL ink
230
HFL BACK BUTTON
NAVI VOICECONTROLBUTTONS
HFL TALK BUTTONHFL TALK BUTTON
HFL BACK BUTTON
On models with navigation systemOn models without navigation system
——
y
y
)yy
2010 Accord Sedan

Try to reduce all background
noise. If the microphone picks up
voices other than yours,
commands may be misinterpreted.
Many commands can be spoken
together. For example, you can
say ‘‘Call 123-456-7890’’ or ‘‘Dial
Peter.’’
Press and release the HFL Talk
button each time you want to
make a command. Af ter the beep,
speak in a clear, natural tone.
When HFL is in use, navigation
voice commands cannot be
recognized.
To change the volume level of
HFL, use the audio system volume
knob or the steering wheel volume
controls.
Airorwindnoisefromthe
dashboard and side vents,
windows and moonroof may
interf ere with the microphone.
Adjust or close them as necessary.
CONT INUED
Voice Cont rol T ips
BluetoothHandsFreeL ink
Features
231
MICROPHONE
——
y
y
)yy
2010 Accord Sedan

To hear general HFL inf ormation,
including help on pairing a phone
or setting up the system, say
‘‘Tutorial.’’
For help at any time, including a
list of available commands, say
‘‘Hands f ree help.’’
A notif ication that there is an
incoming call, or HFL is in use, will
appear on the navigation screen
when the audio system is on.
You will see ‘‘HANDSFREELINK’’
and the ‘‘ ’’ indicator on the
audio display when you operate HFL.
On models with navigation system
Help Feat ures
BluetoothHandsFreeL ink
Inf ormation Display
232
U.S. model with navigation system is shown.
BLUETOOTH INDICATOR
BLUETOOTH INDICATOR
On models without navigation system
PHONE NUMBER
——
y
y
)yy
2010 Accord Sedan

ÌÌÌÌ
CONT INUED
BluetoothHandsFreeL ink
How to Use HFL
Features
233
‘‘Phone Setup’’
‘‘Call’’ or ‘‘Dial’’
‘‘Pair’’
‘‘Edit’’
‘‘Delete’’
‘‘Jim Smith’’
‘‘Set PairingCode’’
The ignition switch must be in the ACCESSORY (I) or ON (II) position.
‘‘List’’
‘‘Status’’
‘‘NextPhone’’
‘‘123-555- ’’
Press HFL Talk button
Press and release the HFL Talk button each time you give a command.
Pair a phone to the system (See page236)
Edit the name of a paired phone (See page237)
Delete a paired phone from the system (See page237)
Hear a list of all phones paired to the system (See page237)
Hear which paired phone is currently linked to the system(See page238)
Search for another previously paired phone to link to (See page238)
Set the pairing code to a ‘‘Fixed’’ or ‘‘Random’’ number(See page238)
Enter desired phone number (See page239)
Once a phonebook entry is stored, you can say a name here.(See page239)
——
y
y
)yy
2010 Accord Sedan

BluetoothHandsFreeL ink
234
‘‘Redial’’
‘‘Transfer’’
‘‘Mute’’
‘‘Send’’
‘‘Phonebook’’
‘‘Store’’
‘‘Edit’’
‘‘Delete’’
‘‘ReceiveContact’’
‘‘List’’
Press HFL Talk button
Press and release the HFL Talk button each time you give a command.
Redial the last number called (See page240)
Transfer a call from HFL to your phone, or from your phone to HFL (See page242)
Mute your voice to the person at the other end of the call (See page243)
Send numbers or names during a call (See page243)
Store a phonebook entry (See page244)
Edit the number of an existing phonebook entry (See page244)
Delete a phonebook entry (See page245)
If your phone supports this function, use this to transfer contacts fromyour phone to HFL (See page245)
Hear a list of all stored phonebook entries (See page245)
——
y

y
)yy
2010 Accord Sedan

Î
Î
CONT INUED
BluetoothHandsFreeL ink
Features
235
‘‘Change Language’’
‘‘Hands Free Help’’
‘‘SystemSet up’’
‘‘Tutorial’’
‘‘Clear’’
‘‘Auto Transfer’’
‘‘Call Notification’’
‘‘Security’’
‘‘Change Passcode’’
Press HFL Talk button
Press and release the HFL Talk button each time you give a command.
: Canadian models
Apply a security passcode to the system that must be input at each keycycle to access the system (See page250)
Change your security passcode (See page251)
Set how you would like to be notified of an incoming call(See page251)
Set calls to automatically transfer from your phone to HFL when youenter the vehicle (See page251)
Clear the system of all paired phones, phonebook entries and securitypasscode (See page252)
Change language from English to French (See page252)
Hear a tutorial for general rules on using the system (See page232)
Hear a list of available commands and additional information describing each command(See page232)
——
y
y
)yy
2010 Accord Sedan

To use HFL, you need to pair your
Bluetooth-compatible cell phone to
the system.
This command group is available f or
paired cell phones.
You cannot pair your phone while
the vehicle is moving.
Your phone must be in discovery
or search mode to pair. Ref er to
your phone’s manual.
Up to six phones can be paired.
Your phone’s battery may drain
f aster when it is paired to HFL.
If af ter three minutes your phone
is not ready to pair or a phone is
not f ound, the system will time out
andreturntoidle.
Press and release the HFL Talk
button. If you are pairing a phone
f or the f irst time, HFL will give
you inf ormation about the pairing
process. If it is not the f irst phone
you are pairing, say ‘‘
’’ and say ‘‘ .’’
Follow the HFL prompts and put
your phone in discovery or search
mode. HFL will give you a 4-digit
pairing code and begin searching
foryourphone.
When your phone f inds a
Bluetooth device, select HFL f rom
the options and enter the 4-digit
code f rom the previous step.
Follow the HFL prompts and
name the newly paired phone.
1.
2.
3.
4.
Phone Setup
Phone
setup Pair
Phone pairing tips
T o pair a cell phone:
BluetoothHandsFreeL ink
236
——
y
y
)y
y
2010 Accord Sedan

Say ‘‘.’’
Say‘‘ ’’aftertheprompts.
If there is more than one phone
paired to the system, HFL will ask
you which phone’s name you want
to change. Follow the HFL
prompts and rename the phone.
Press and release the HFL Talk
button bef ore a command.
Press and release the HFL Talk
button bef ore a command.
Say ‘‘.’’
Say‘‘ ’’aftertheprompts.
HFL will ask you which phone you
want to delete. Follow the HFL
prompts to continue with the
deletion.
Press and release the HFL Talk
button bef ore a command.
HFL will read out all the paired
phone’s names.
Say‘‘ ’’aftertheprompts.
Say ‘‘.’’
1.
2.
3.3.
1.
2.
1.
2.
3.
CONT INUED
Phone setup
Edit
Phone setup
Delete
List
Phone setup
To hear the names of all paired
phones:
T o rename a paired phone:T o delet e a paired phone:
BluetoothHandsFreeL ink
Features
237
——
y

y
)yy
2010 Accord Sedan