2010 GMC YUKON DENALI wipers

[x] Cancel search: wipers

Page 20 of 560

GMC YUKON DENALI 2010  Owners Manual Windshield Wiper/Washer
8:Single wipe, turn to8, then release. Several
wipes, hold the band on
8longer.
9: Turns the windshield wipers off.
6:Turn the band up for more frequent wipes or down
for less

Page 139 of 560

GMC YUKON DENALI 2010  Owners Manual On vehicles with a liftglass, press the button on the
underside of the license pocket applique (A) to open it.
The liftglass can also be opened by pressing the
liftglass release button on the RKE.
To

Page 151 of 560

GMC YUKON DENALI 2010  Owners Manual Ignition Positions
The ignition switch has
four different positions.
To shift out of P (Park), the ignition must be in ON/RUN
or ACC/ACCESSORY and the regular brake pedal must
be applied. A (LOCK/OFF)

Page 195 of 560

GMC YUKON DENALI 2010  Owners Manual Section 4 Instrument Panel
Instrument Panel Overview. . . . . . . . . . . . . . . . . . . . . . . .4-3
Hazard Warning Flashers . . . . . . . . . . . . . . . . . . . . . . . 4-3
Horn . . . . . . . . .

Page 198 of 560

GMC YUKON DENALI 2010  Owners Manual Heated Steering Wheel
For vehicles with a heated steering wheel, the button for
this feature is located on the steering wheel.
(:Press to turn the heated steering wheel on or off.
A light on the butto

Page 200 of 560

GMC YUKON DENALI 2010  Owners Manual Flash-to-Pass
This feature lets you use the high-beam headlamps to
signal a driver in front of you that you want to pass.
It works even if the headlamps are in the automatic
position.
To use it, pull

Page 201 of 560

GMC YUKON DENALI 2010  Owners Manual Clear ice and snow from the wiper blades before using
them. If frozen to the windshield, carefully loosen or
thaw them. Damaged wiper blades should be replaced.
SeeWindshield Wiper Blade Replacement
o

Page 493 of 560

GMC YUKON DENALI 2010  Owners Manual Notice:Machine compounding or aggressive
polishing on a basecoat/clearcoat paint finish may
damage it. Use only non-abrasive waxes and
polishes that are made for a basecoat/clearcoat
paint finish on t
Page:   1-8 9-16 next >