2010 GMC YUKON DENALI oil change

[x] Cancel search: oil change

Page 5 of 560

GMC YUKON DENALI 2010  Owners Manual Vehicle Symbol Chart
Here are some additional symbols that may be found on
the vehicle and what they mean. For more information
on the symbol, refer to the index.
0:Adjustable Pedals
9:Airbag Readines

Page 29 of 560

GMC YUKON DENALI 2010  Owners Manual Note:The Tire Pressure Monitor can alert you about
low tire pressure, but it does not replace normal monthly
tire maintenance. It is the driver ’s responsibility to
maintain correct tire pressures.

Page 153 of 560

GMC YUKON DENALI 2010  Owners Manual Starting Procedure
1. With your foot off the accelerator pedal, turn theignition to START. When the engine starts,
let go of the key. The idle speed will slow down
as the engine warms. Do not race the

Page 195 of 560

GMC YUKON DENALI 2010  Owners Manual Section 4 Instrument Panel
Instrument Panel Overview. . . . . . . . . . . . . . . . . . . . . . . .4-3
Hazard Warning Flashers . . . . . . . . . . . . . . . . . . . . . . . 4-3
Horn . . . . . . . . .

Page 240 of 560

GMC YUKON DENALI 2010  Owners Manual Transmission Temperature
Press the trip/fuel button until TRANS TEMP displays.
This display shows the temperature of the automatic
transmission fluid in either degrees Fahrenheit (°F) or
degrees Cels

Page 241 of 560

GMC YUKON DENALI 2010  Owners Manual just been changed. It cannot be reset accurately until
the next oil change. To reset the engine oil life system,
seeEngine Oil Life System on page 6‑18.
Side Blind Zone Alert
If your vehicle has the

Page 244 of 560

GMC YUKON DENALI 2010  Owners Manual Language
This display allows you to select the language in which
the DIC messages will appear. To select a language:1. Press the trip odometer reset stem until ODOMETER displays.
2. While in the ODOME

Page 246 of 560

GMC YUKON DENALI 2010  Owners Manual Compass Zone Setting
This display allows for setting the compass zone.
SeeDIC Compasson page 4‑53for more information.
Compass Recalibration
This display allows for calibrating the compass.
SeeDIC C
Page:   1-8 9-16 17-24 next >