Item CapacityFord part name or
equivalentFord part number /
Ford Specification
Fuel tank16.0 gallons
(60.5L)——
Transmission fluid
3
6.35 pints (3.5L)
4
Motorcraft
MERCONVATFXT-5-QM /
MERCONV
Windshield washer fluid 4.0 quarts (3.8L)Motorcraft Premium
Windshield Washer
ConcentrateZC-32-A /
WSB-M8B16–A2
1Add the coolant type originally equipped in your vehicle.2Rear axle lubricants do not need to be checked or changed unless a leak is suspected, service is
required or the axle assembly has been submerged in water. The axle lubricant should be changed
any time the rear axle has been submerged in water, using SAE 75W-140 High Performance rear
axle lube, meeting Ford specification WSL-M2C192–A.
Fill 1/4-9/16 in. (6-14 mm) below bottom of fill hold. Add 4 oz. (118 ml) of Additive Friction
Modifier C3AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for complete
refill of Traction-Lok axles.3The Tremec TR-6060 6–Speed manual transmission on your Shelby GT500 uses MERCONV
automatic transmission fluid. Ensure that the correct MERCONV ATF automatic transmission
fluid is used as indicated on the label on your transmission.4Service refill capacity is determined by filling the transmission to the bottom of the filler hole with
the vehicle on a level surface.
Maintenance and Specifications
28
2010 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)
ENGINE INFORMATION
Item Description
ConfigurationLongitudinally mounted, 90-degree
V8, cast-iron cylinder block and
cast aluminum cylinder heads
Bore x Stroke90.2 x 105.8 mm (3.55 x 4.165 in)
Displacement5410 cc/330 cid
Compression ratio8.4:1
Horsepower540 Horsepower @ 6200 rpm
Torque510 lb-ft torque @ 4500 rpm
Redline6250 rpm fuel shut-off
Specific output100 HP per liter
ValvetrainDual overhead chain-driven cams,
roller finger followers with
hydraulic lash adjustment,
ovate-wire valve springs, four
valves per cylinder
Fuel systemSequential electronic fuel injection
Mass air sensor105 mm (4.13 in) circle
Throttle bodyTwin 60 mm (2.36 in) diameter
bore-simultaneously open
PistonsForged aluminum
CrankshaftForged steel
Connecting rodsForged steel I-beam
SuperchargerEaton model 122, Roots-type
Exhaust manifoldsCast high-silicon, molybdenum iron
Exhaust systemDual stainless steel
Maintenance and Specifications
30
2010 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)
