2010 FORD MUSTANG maintenance

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES
Item CapacityFord part name or
equivalentFord part number /
Ford Specification
Brake fluidBetween MIN and
MAX lines on
reservoirMotorcraft High
Performance DOT 3
Motor Vehicle Brake
FluidPM-1-C /
WSS-M6C62-A or
WSS-M6C65-A1
Engine oil (includes
filter change)6.5 quarts (6.1L)Motorcraft 5W-50 Full
Synthetic Motor OilX0-5W50-QGT /
WSS-M2C931-B
Engine coolant
1
21.1 quarts
(20.0L)Motorcraft Premium
Gold Engine Coolant
with bittering agent
(yellow-colored)VC-7-B /
WSS-M97B51-A1
Intercooler coolant
1
3.96 quarts
(3.75L)
(See your
authorized dealer
for service)Motorcraft Premium
Gold Engine Coolant
with bittering agent
(yellow-colored)VC-7-B /
WSS-M97B51-A1
Power steering fluidBetween MIN and
MAX lines on
reservoirMotorcraft
MERCON
VATFXT-5-QM /
MERCON
V
Rear axle lubricant
2
4.25 pints (2.0L)Motorcraft SAE 75W-140
High Performance
Synthetic Rear Axle
LubricantXY-75W140-QL /
WSL-M2C192–A
Maintenance and Specifications
27
2010 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

Item CapacityFord part name or
equivalentFord part number /
Ford Specification
Fuel tank16.0 gallons
(60.5L)——
Transmission fluid
3
6.35 pints (3.5L)
4
Motorcraft
MERCON
VATFXT-5-QM /
MERCON
V
Windshield washer fluid 4.0 quarts (3.8L)Motorcraft Premium
Windshield Washer
ConcentrateZC-32-A /
WSB-M8B16–A2
1Add the coolant type originally equipped in your vehicle.2Rear axle lubricants do not need to be checked or changed unless a leak is suspected, service is
required or the axle assembly has been submerged in water. The axle lubricant should be changed
any time the rear axle has been submerged in water, using SAE 75W-140 High Performance rear
axle lube, meeting Ford specification WSL-M2C192–A.
Fill 1/4-9/16 in. (6-14 mm) below bottom of fill hold. Add 4 oz. (118 ml) of Additive Friction
Modifier C3AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for complete
refill of Traction-Lok axles.3The Tremec TR-6060 6–Speed manual transmission on your Shelby GT500 uses MERCON
V
automatic transmission fluid. Ensure that the correct MERCON
V ATF automatic transmission
fluid is used as indicated on the label on your transmission.4Service refill capacity is determined by filling the transmission to the bottom of the filler hole with
the vehicle on a level surface.
Maintenance and Specifications
28
2010 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

USING THE RIGHT BULBS
Function Trade Number
Park lamp, turn lamp, side marker (front) 3156K
Luggage compartment lamp S211
Fog lamp PS24N
DRIVETRAIN
Item Description
Rear axle8.8 in. solid rear axle with limited-slip
differential 3.55:1 ratio
Driveshaft2-piece aluminum
TransmissionTremec TR–6060 6-speed manual with integral
clutch housing
Gear ratiosGear Ratio
1st 2.97
2nd 1.78
3rd 1.30
4th 1.00
5th 0.74
6th 0.50
Reverse 2.90
Maintenance and Specifications
29
2010 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

ENGINE INFORMATION
Item Description
ConfigurationLongitudinally mounted, 90-degree
V8, cast-iron cylinder block and
cast aluminum cylinder heads
Bore x Stroke90.2 x 105.8 mm (3.55 x 4.165 in)
Displacement5410 cc/330 cid
Compression ratio8.4:1
Horsepower540 Horsepower @ 6200 rpm
Torque510 lb-ft torque @ 4500 rpm
Redline6250 rpm fuel shut-off
Specific output100 HP per liter
ValvetrainDual overhead chain-driven cams,
roller finger followers with
hydraulic lash adjustment,
ovate-wire valve springs, four
valves per cylinder
Fuel systemSequential electronic fuel injection
Mass air sensor105 mm (4.13 in) circle
Throttle bodyTwin 60 mm (2.36 in) diameter
bore-simultaneously open
PistonsForged aluminum
CrankshaftForged steel
Connecting rodsForged steel I-beam
SuperchargerEaton model 122, Roots-type
Exhaust manifoldsCast high-silicon, molybdenum iron
Exhaust systemDual stainless steel
Maintenance and Specifications
30
2010 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

Engine drivebelt routing
5.4L DOHC 32V Supercharged V-8
Maintenance and Specifications
31
2010 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)

WARRANTY COVERAGE
The Shelby GT500 carries the same warranty as other Ford Mustang
models. This information is covered in its entirety in the Ford Motor
Company Warranty Guide.
Warranty service for the Shelby GT500 or any SVT vehicle can be
obtained at any Ford dealer nationwide.
SVT does not recommend modifying or racing SVT vehicles, as they are
designed and built to be driven as delivered from the factory. The Ford
Motor Company Warranty Guide discusses vehicle usage and the
installation of aftermarket parts and their effect on warranty coverage.
Please see the Warranty Guide for complete information.
In the event the vehicle is intended for track use, and the loss of
warranty coverage is not of concern, the following vehicle durability
modifications are recommended:
•Install transmission oil cooler. Permanent damage to the transmission
will result if the vehicle is subjected to competition conditions without
installation of a transmission oil cooler.
•Install rear differential cooler. Permanent damage to the rear
differential will result if the vehicle is subjected to competition
conditions without installation of a differential cooler.
•Install Ford Racing brake cooling duct kit. Excessive brake wear will
occur if the vehicle is subjected to competitive conditions without
installation of a brake cooling kit.
Additionally, perform Multi-Point Inspection and the inspections outlined
in the 150,000 mile (240,000 km) Normal Maintenance Schedule of the
scheduled maintenance informationbefore and after track use. Refer
to the Vehicle Service Manual for removal and installation procedures.
Replace with Genuine Ford and Motorcraft service parts as needed.
These modifications may not necessarily protect your engine from
damage in competition conditions. Subjecting your vehicle to competition
conditions even with these proposed modifications may render repairs
non-reimbursable under the warranty.
Warranty coverage
32
2010 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)