2010 FORD EXPLORER SPORT TRAC reset

[x] Cancel search: reset

Page 4 of 344

FORD EXPLORER SPORT TRAC 2010  Owners Manual CONGRATULATIONS
Congratulations on acquiring your new Ford. Please take the time to get
well acquainted with your vehicle by reading this handbook. The more
you know and understand about your vehicle,

Page 10 of 344

FORD EXPLORER SPORT TRAC 2010  Owners Manual These are some of the symbols you may see on your vehicle.
Vehicle Symbol Glossary
Safety Alert
See Owner’s Guide
Fasten Safety BeltAirbag - Front
Airbag - SideChild Seat Lower
Anchor
Child Seat Tet

Page 19 of 344

FORD EXPLORER SPORT TRAC 2010  Owners Manual Odometer:Registers the total miles (kilometers) of the vehicle.
•Standard instrument cluster
•Optional instrument cluster
Refer toMessage centerin this
chapter on how to switch the
display from En

Page 20 of 344

FORD EXPLORER SPORT TRAC 2010  Owners Manual Fuel gauge:Indicates
approximately how much fuel is left
in the fuel tank (when the ignition
is in the on position). The fuel
gauge may vary slightly when the
vehicle is in motion or on a grade.
Refer

Page 21 of 344

FORD EXPLORER SPORT TRAC 2010  Owners Manual Remember to turn the ignition off when refueling to allow this feature to
correctly detect the added fuel.
The DTE function will display FUEL LEVEL LOW and sound a tone for
one second when you have ap

Page 22 of 344

FORD EXPLORER SPORT TRAC 2010  Owners Manual The following setup features are available:
SYSTEM CHECK HOLD RESET
Press and hold the SELECT/RESET stem to select system check when
this is displayed in the message center. The message center will cy

Page 23 of 344

FORD EXPLORER SPORT TRAC 2010  Owners Manual ENGLISH / SPANISH / FRENCH / JAPANESE
Allows you to choose which language the message center will display in.
Selectable languages are English, Spanish, French, or Japanese.
1. Press and hold the SELE

Page 24 of 344

FORD EXPLORER SPORT TRAC 2010  Owners Manual TRAILER SWAY
This feature uses the electronic stability control to mitigate trailer sway,
1. Press and hold the SELECT/RESET stem to turn trailer sway on or
off.
2. Press the SELECT/RESET stem for the
Page:   1-8 9-16 17-24 25-32 33-40 ... 40 next >