2010 FIAT PUNTO EVO Demisting

57
SWITCHING ON THE CLIMATE CONTROL
SYSTEM
The system can be activated by pressing any of the but-
tons; it is, however, advisable to set the desired temper-
atures on the display, then press the AUTO button.
The climate control system allows you to customise the
temperatures (driver side and passenger side) with a max-
imum difference of 7°C.
The climate control system compressor works only with
the engine running and with an outside temperature of
above 4°C.
AUTOMATIC FUNCTION OF THE CLIMATE
CONTROL SYSTEM (AUTO function)
Press the AUTO button; the system will automatically ad-
just:
❒the amount of air introduced into the passenger com-
partment;
❒the distribution of air inside the passenger compartment;
cancelling any previous manual settings.
During climate control system automatic operation, the
words FULL AUTO appear on the display.
During automatic operation it is still possible to adjust the
set temperature and carry out the following operations
manually:
❒adjust fan speed;
❒select air distribution;
❒switch air recirculation and AQS function on/off;
❒switch on the climate control system compressor.REGULATING THE FAN SPEED
Press button
pto increase/decrease the fan speed.
The 12 possible speeds are indicated by bars lighting up on
the display:
❒max fan speed = all bars lit;
❒min. fan speed = one bar lit.
The fan can be disabled (no bars lit) only if the climate con-
trol compressor has been switched off by pressing but-
ton
❄.
To restore automatic fan speed control after a manual ad-
justment, press AUTO.
RAPID FRONT WINDOWS DEMISTING/
DEFROSTING (MAX-DEF function)
Press button
-to automatically activate the timed op-
eration of all the functions required to rapidly
demist/defrost the windscreen and front side windows.
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
It is advisable not to use the air recircula-
tion function when the outside tempera-
ture is low to prevent the windows from rapidly
misting up.
WARNING
037-081 PUNTO FL EN 4ed 18-01-2010 12:23 Pagina 57

These functions are:
❒climate control compressor engagement (with an out-
side temperature above 4°C);
❒switching off, if previously on, of the interior air recir-
culation (the LED on button
Tshould be off);
❒switching on of heated rear windscreen (the LED on
button
-should be on) and wing mirror heater coils;
❒setting maximum air temperature;
❒activation of air flow.
DEMISTING/DEFROSTING OF HEATED REAR
WINDSCREEN AND WING MIRRORS
Press button (to activate; when this function is on, the
button LED lights up.
This function is timed and will turn off automatically after
20 minutes. Press (again to disable the function in ad-
vance.
IMPORTANT Do not apply stickers on the inside of the
rear window over the heating filaments to avoid damage
that might cause it to stop working properly.
IMPORTANT Press
Tto introduce air from the out-
side (in this case the LED on the button should be off).ACTIVATION OF INTERIOR AIR
RECIRCULATION AND ENABLEMENT
OF AQS FUNCTION (Air Quality System)
Press button
T.
Air recirculation is carried out according to three possi-
ble operating modes:
❒automatic control, signalled by the AQS sign on the dis-
play and the LED on button
Tbeing off;
❒permanently off (air recirculation always off with intro-
duction of external air), indicated by the LED on but-
ton
Tbeing off;
❒permanently on (air recirculation always on), signalled
by the LED on button
Tbeing lit up.
When OFF is pressed, the climate control system automatically
activates air recirculation (the LED on button
Tshould be
on). It is still possible to activate outside air recirculation (LED on
the button is off) and vice versa, by pressing button
T.
With the OFF button pressed (LED on the button is lit
up), it is not possible to enable the AQS (Air Quality Sys-
tem) function.
IMPORTANT The air recirculation system makes it pos-
sible to reach the required heating or cooling conditions
faster. It is not advisable to switch the air recirculation
on when it is rainy/cold or the windows might mist up, es-
pecially if the climate control is not turned on. It is advis-
able to switch the internal air internal recirculation on
while standing in queues or in tunnels to prevent the in-
troduction of polluted air. Do not use the function for
a long time, particularly if there are many passengers on
board, to prevent the windows from misting up.
58
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
037-081 PUNTO FL EN 4ed 18-01-2010 12:23 Pagina 58

Q
ZEAir flow distribution between front and rear vents,
centre/side dashboard vents, rear vent and wind-
screen and front side window demisting/defrosting
vents.
EAir flow distribution to centre/side dashboard vents
(passenger’s body).
QAir flow distribution between the footwell
Zvents and the windscreen and front side window
demisting/defrosting vents. This distribution setting
allows warms up the passenger compartment and
prevents the windows from misting up.
ZEAir flow distribution between footwell vents (hot-
ter air) and centre/side dashboard vents and rear
vent (cooler air).
EQAir flow distribution between centre/side dash-
board vents, rear vent and windscreen and front
side window demisting/defrosting vents. This dis-
tribution setting ventilates the passenger compart-
ment and prevents the windows from misting up.
IMPORTANT For the climate control system to function,
at least one of the following buttons must be on: Q/E/Z.
The system does not allow all the buttons Q/E/Zto be
switched off.
IMPORTANT Push the OFF button to turn the climate
control system back on: in this way, all previously saved
operating conditions are restored before switching off.
To restore automatic control of the air distribution after
a manual selection, press the AUTO button.ADDITIONAL HEATER
(for versions/markets where provided)
This device warms up the passenger compartment more
quickly when it is very cold and the engine coolant tem-
perature is low.
In these conditions, the device comes on automatically
when the engine is started and the fan is on.
The additional heater turns off automatically after reach-
ing the required comfort conditions.
IMPORTANT The heater will not turn on if the battery
voltage is too low.
SWITCHING OFF THE CLIMATE CONTROL
SYSTEM
Press the OFF button.
The following information is shown on the display:
❒ the word OFF;
❒outside temperature reading;
❒indication that air recirculation is switched on (LED on
button
Tis lit).
60
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
037-081 PUNTO FL EN 4ed 18-01-2010 12:23 Pagina 60

260
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
Cleaning and maintenance
– bodywork ...................................... 231
– engine compartment ................... 233
– fabric seats .................................... 234
– interiors ......................................... 233
– leather upholstery ....................... 234
– windows ......................................... 233
– plastic parts ................................... 234
Climate control ................................... 53
– air vents ..................................47-48
Clock
– adjusting ......................................... 30
Clutch
– technical specifications ............... 240
CO
2emissions at exhaust ................ 254
CODE card .......................................... 5
Control buttons .................................. 71
Cruise Control .................................... 66
Dashboard ....................................3-265
Deactivating airbags .....................36-143
Dead lock ............................................. 86
Defrosting/demisting
– rear window ....................51-55-72
– windscreen and front
side windows ..................50-54-57
Demisting/defrosting
– rear window ....................51-55-72
– windscreen and front
side windows....................50-54-57
– wing mirrors.....................51-55-58
Digital display ........................................ 17
– control buttons ............................ 18
– setup menu ................................... 18
– standard screen ............................ 17Dipped beam headlights
– bulb replacement ........................ 190
– switching on ................................. 61
Dipped beam headlights
– bulb replacement ........................ 190
– switching on ................................. 61
Direction indicators
– switching on ................................. 62
– front bulb replacement ............. 191
– rear bulb replacement ................ 193
Direction indicators
– switching on ................................. 62
– front bulb replacement ............. 191
– rear bulb replacement ................ 193
Direction Indicators
– switching on ................................. 62
– front bulb replacement ............. 191
– side bulb replacement ................. 192
– rear bulb replacement ............... 193
Disposing of the car ........................... 255
Door locks ........................................... 73
Doors
– central locking .............................. 73
– child safety device ........................ 87
– locking/unlocking
from the inside ......................73-84
– remote control ............................ 6
– remote locking/unlocking ........... 6
DPF (particulate filter) ....................... 128
Driving economically ......................... 154
Electrical/electronic devices ............ 124
Emergency rear door locking
device ................................................. 88Emergency starting ............................. 175
– bump starting ................................ 176
– jump starting ................................. 175
End of vehicle life ................................ 255
Engine
– engine immobiliser (Fiat CODE) .. 4
– identification codes ..................... 237
– marking .......................................... 236
– technical specifications ............... 238
Engine codes ........................................ 237
Engine compartment
– checking levels .............................. 217
– opening/closing the bonnet ....... 97
– washing ......................................... 233
Engine coolant
– checking levels and topping up ... 222
– specifications ................................. 252
Engine coolant
– checking and topping up ............. 222
– specifications ................................. 252
– temperature gauge and
warning light .................................. 16
Engine coolant temperature
gauge ................................................... 16
– type of coolant ............................. 222
Engine cooling
– checking levels and topping up ... 222
– specifications ................................. 252
Engine immobiliser (Fiat CODE) ...... 4
Engine marking .................................... 236
Engine oil
– checking levels and topping up ... 220
– consumption ................................. 220
– specifications ................................. 251
259-268 PUNTO FL EN 4ed 18-01-2010 12:29 Pagina 260