Page 53 of 253
77Comfort
These have one position for use (up) and a stowed position (down). They can also be removed. To remove a head restraint: release the backrest using control 1 , tilt the backrest 2 slightly for wards,
pull the head restraint upwards to the stop, then, press the lug A .
R e a r h e a d r e s t r a i n t s
Never drive with the head restraints removed; they must be in place and correctly adjusted.
Steering wheel adjustment
W h e n s t a t i o n a r y , pull the control lever to W h e n s t a t i o n a r y W h e n s t a t i o n a r yrelease the steering wheel. Adjust the height and reach to suit your driving position. Push the control lever to lock the steering wheel.
As a safety precaution, these operations should only be carried out while the vehicle is stationary.
Page 54 of 253
77Comfort
These have one position for use (up) and a stowed position (down). They can also be removed. To remove a head restraint: release the backrest using control 1 , tilt the backrest 2 slightly for wards,
pull the head restraint upwards to the stop, then, press the lug A .
R e a r h e a d r e s t r a i n t s
Never drive with the head restraints removed; they must be in place and correctly adjusted.
Steering wheel adjustment
W h e n s t a t i o n a r y , pull the control lever to W h e n s t a t i o n a r y W h e n s t a t i o n a r yrelease the steering wheel. Adjust the height and reach to suit your driving position. Push the control lever to lock the steering wheel.
As a safety precaution, these operations should only be carried out while the vehicle is stationary.
Page 79 of 253
103Visibility
LED lamps
Daytime external lighting using specific front lamp s providing a signature of the vehicle. Comprising two sets of six light emitting diodes (LEDs), they are located in the ver tical scoops below each headlamp.
On star ting the vehicle, in daylight the LED lamps come on automatically, if the lighting stalk is in position "0" or "AUTO" . If the sidelamps and headlamps are switched
on manually or automatically, the LED lamps switch off.
For countries where exterior lighting by day is not a legal requirement, you can activate or deactivate the function via the multifunction screen configuration menu.
Headlamp
adjustment
To avoid causing a nuisance to other road users, the height of the headlamps should be adjusted in relation to the load in the vehicle. 0. Driver only or driver + front passenger. - . Intermediate setting 1. 5 people. - . 5 people + load in the boot. 2. Driver only + maximum authorised load in the boot. This position is sufficient to avoid causing dazzle. Higher settings may limit the spread of light from the headlamps.
The initial setting is position "0" .
Programming
In countries where it is a legal requirement: - this function is activated by default and cannot be deactivated, - in daylight, the sidelamps and number plate lamps also come on, - If the sidelamps or headlamps are switched on manually or
automatically, the LED lamps switch off.
For versions not fitted with LED lamps, it is the dipped beam headlamps that come on automatically on star ting the vehicle.
Page 101 of 253
Child safety
Installing child seats attached with the seat belt
In accordance with European regulations, this table indicates the options for installing child seats secur ed using a seat belt and universally approved (a)in accordance with the weight of the child and the seat in the vehicle.
Weight of the child and indicative age
SeatUnder 13 kg(groups 0 (b) and 0+) Up to approx. 1 year
From 9 to 18 kg(group 1) 1 to 3 years approx.
From 15 to 25 kg(group 2) 3 to 6 years approx.
From 22 to 36 kg(group 3) 6 to 10 years approx.
Front passenger seat (c)
- fixed - adjustable for height UU(R)UU(R)UU(R)UU(R)
Outer rear seats UUUU
Centre rear seat UUUU
(a) Universal child seat: child seat that can be installed in all vehicles using a seat belt. (b) Group 0: from bir th to 10 kg. Shells seats and baby c arriers cannot be installed in the front passenger seat. (c) Consult the legislation in force in your country before installing your child on this seat. U: Seat suitable for the installation of a child seat secured using a seat belt and universally approve d, "rear wards-facing" and/or "for wards-facing". U(R): as for U , with the vehicle seat adjusted to its highest position and in the fully back position.
Page 245 of 253
4Comfort
Front seats
Seat consisting of a seat cushion and a seat back w hich can be adjusted to adapt your position for maxim um ease of driving and comfor t.
Manual adjustments
Forwards-backwards adjustment
Lift the control and slide the seat for wards or backwards.
Driver's or passenger's seat height adjustment
Pull the handle upwards to raise or push
it downwards to lower, as many times as necessary to obtain the required position.
Seat backrest angle adjustment
Push the handle towards the rear and move the seat backrest for wards or backwards.
