2010 CITROEN C CROSSER Indicators
[x] Cancel search: IndicatorsPage 2 of 217
I
20
INSTRUMENT PANEL WARNING LAMPS
Warning lamp is on Cause Actions/
Observations
Left-hand direction
indicator Flashing
with
audible
warning T h i s fl a s h e s w h e n y o u
press the lighting stalk
down. I f t h i s i n d i c a t o r l a m p fl a s h e s a b n o r m a l l y q u i c k l y ,
this could indicate that the bulb of one of the
direction indicators has blown. Change the bulb
or contact a CITROËN dealer.
Right-hand direction
indicator Flashing
with
audible
warning T h i s fl a s h e s w h e n y o u
push the lighting stalk up. I f t h i s i n d i c a t o r l a m p fl a s h e s a b n o r m a l l y q u i c k l y ,
this could indicate that the bulb of one of the
direction indicators has blown. Change the bulb
or contact a CITROËN dealer.
Main beam headlamps Fixed This comes on when
you pull the lighting stalk
towards you. Pull the stalk to return to dipped beam
headlamps.
Sidelamps Fixed This comes on when the
lighting stalk is in the
"Sidelamps" or "Dipped
beam headlamps"
position. Turn the stalk to the desired position.
Front foglamps Fixed This comes on when you
use the front foglamps. Turn the ring on the stalk forwards to switch on
the foglamps.
Rear foglamps Fixed This comes on when you
use the rear foglamps. Turn the ring on the stalk forwards to switch on
the foglamps.
Cruise control Fixed This comes on when the
mode is active. Press the "ON/OFF" button to activate/
deactivate the mode.
Page 17 of 217
I
!
M O N I T O R I N G
33
When the vehicle is
s t a t i o n a r y , i t a l l o w s
the user to change the
following settings:
- resetting average fuel consumption
a n d a v e r a g e s p e e d ,
- t h e f u e l c o n s u m p t i o n u n i t s ,
- t h e t e m p e r a t u r e d i s p l a y u n i t s ,
- t h e d i s p l a y l a n g u a g e ,
- activation/deactivation of the INFO
b u t t o n s o u n d ,
- the break (rest) reminder display i n t e r v a l ,
- restore factory settings.
SETTING MENU
System which provides access to the
settings of certain functions.
T o c h a n g e t h e s e t t i n g s , y o u
must stop the vehicle and switch
on the ignition.
Apply the parking brake and place
the gear lever in neutral.
When the vehicle is moving , t h e
setting menu screen is not displayed
when you press the INFO button.
The various menus may differ for the
type 1 instrument panel and the type 2
instrument panel.
With the ignition on , p r e s s t h e INFO
b u t t o n o n t h e d a s h b o a r d , t o t h e r i g h t o f
t h e i n s t r u m e n t p a n e l , s e v e r a l t i m e s i n
succession until the "SETTING MENU"
screen is displayed.
Operation
press and hold the INFO button for
a few seconds to display the menu
screen.
Press and hold the INFO button
for a few seconds to return to the
previous screen.
When the menus screen is dis-
p l a y e d , i f n o o p e r a t i o n i s c a r r i e d o u t
w i t h i n 1 5 s e c o n d s , t h e s e t t i n g m e n u
screen is displayed.
o n t h e m e n u s c r e e n , p r e s s t h e INFO
button to select a function from the
list:
MENU
2/3:
- a/b (option of displaying a different
language in the instrument panel
s c r e e n a n d t h e n a v i g a t i o n s c r e e n ) ,
- a c t i v a t i o n / d e a c t i v a t i o n o f t h e I N F O
button sound ,
- ALARM
(changing the "BREAK
R E M I N D E R " d i s p l a y i n t e r v a l ) ,
- choice of the direction indicators s o u n d ,
- a c t i v a t i o n / d e a c t i v a t i o n o f
current
f u e l c o n s u m p t i o n ,
MENU
1/3
:
- 1 - 2 (options for resetting aver-
age fuel consumption and average
s p e e d ) ,
- UNIT (choice of the fuel consump-
t i o n u n i t s ) ,
- choice of the t e m p e r a t u r e d i s p l a y
unit
s ,
- LANGUAGE (choice of display lan-
g u a g e ) ,
MENU 3/3:
- RESET
(restore factory settings).
Page 20 of 217
I
M O N I T O R I N G
36
C h o i c e o f t h e d i r e c t i o n indicators sound
You can choose the sound of the direc-
t i o n i n d i c a t o r s , o n t h e t y p e 2 i n s t r u m e n t
panel only.
On the menus screen:
press the INFO button to select
sound 1 or 2 (located on menu 2/3) .
Functions F a c t o r y
setting
Resetting average fuel consumption and average speed
1 (automatic)
Fuel consumption units
L/100 km
Temperature display unit
°C
Display language ENGLISH
INFO button sound
ON (activated)
Display of
the "BREAK
REMINDER" message
OFF (deactivated)
A c t i v a t i o n / d e a c t i v a t i o n o f t h e c u r r e n t f u e l c o n s u m p t i o n
You can activate or deactivate the
c u r r e n t f u e l c o n s u m p t i o n , o n t h e t y p e 2
instrument panel only.
On the menu screen:
press the INFO button to select the
current fuel consumption activation/
deactivation symbol (located on
menu 2/3) .
press the INFO button for a few
seconds to alternate between the
c h o i c e s ( O N , O F F ) .
R e s t o r i n g f a c t o r y s e t t i n g s (RESET)
You can restore all of the factory settings
for all of the functions.
On the menu screen:
press the INFO button to select
"
RESET
"
(located on menu 2/2 or
3/3 depending on the instrument
panel) . The factory settings are:
press and hold the INFO button for
at least 5 seconds .
An audible signal is heard and all of the
factory settings are restored for all of
the functions.
Page 94 of 217
VI
S A F E T Y
99
DIRECTION INDICATORS HAZARD WARNING LAMPS HORN
Left: lower the lighting stalk passing
the point of resistance.
Right: raise the lighting stalk pass-
ing the point of resistance.
Press one of the spokes of the
steering wheel.
"Motorway" function
P r e s s b r i e fl y u p w a r d s o r d o w n -
w a r d s , w i t h o u t g o i n g b e y o n d t h e
p o i n t o f r e s i s t a n c e ; t h e d i r e c t i o n i n -
d i c a t o r s w i l l fl a s h 3 t i m e s . A u d i b l e w a r n i n g t o a l e r t o t h e r r o a d u s e r s
t o a n i m m i n e n t d a n g e r .
T h e a u d i b l e s i g n a l c a n b e c o n fi g u r e d
v i a t h e c o l o u r s c r e e n " E q u i p m e n t "
m e n u .
P r e s s t h i s b u t t o n , t h e d i r e c t i o n i n d i -
c a t o r s fl a s h .
T h e y c a n o p e r a t e w i t h t h e i g n i t i o n o f f .
Automatic operation of hazard warning lamps
W h e n b r a k i n g i n a n e m e r g e n c y , d e -
p e n d i n g o n t h e d e c e l e r a t i o n , t h e h a z a r d
w a r n i n g l a m p s c o m e o n a u t o m a t i c a l l y .
T h e y s w i t c h o f f a u t o m a t i c a l l y t h e fi r s t
t i m e y o u a c c e l e r a t e .
Y o u c a n a l s o s w i t c h t h e m o f f b y
p r e s s i n g t h e b u t t o n .
A v i s u a l w a r n i n g b y m e a n s o f t h e d i r e c -
t i o n i n d i c a t o r s t o a l e r t o t h e r r o a d u s e r s t o
a v e h i c l e b r e a k d o w n , t o w i n g o r a c c i d e n t .
Page 130 of 217
IX
!
!
P R A C T I C A L I N F O R M A T I O N
134
CHANGING A BULB
H a n d l e t h e b u l b s u s i n g a d r y
cloth.
Do not clean the headlamps using
a dry or abrasive cloth, or using
detergent or solvent products, u s e
a s p o n g e a n d s o a p y w a t e r . I n s o m e w e a t h e r c o n d i t i o n s ( e . g . l o w
t e m p e r a t u r e o r h u m i d i t y ) , t h e p r e s e n c e
o f m i s t i n g o n t h e i n t e r n a l s u r f a c e o f t h e
g l a s s o f t h e h e a d l a m p s a n d r e a r l a m p s
i s n o r m a l ; i t d i s a p p e a r s a f t e r t h e l a m p s
h a v e b e e n o n f o r a f e w m i n u t e s .
Front lamps
1. Direction indicators
(PY21W - 21 W).
2. Dipped
beam
headlamps
(H11 - 55 W)
or xenon bulb (D2S - 35 W).
3. Sidelamps
(W5W - 5 W).
4. Main beam headlamps
(H7 - 55 W).
5. Front
foglamps
(H11 - 55 W). WARNING: RISK OF
ELECTROCUTION
X e n o n b u l b s m u s t b e r e p l a c e d b y a
C I T R O Ë N d e a l e r .
Page 135 of 217
IX
P R A C T I C A L I N F O R M A T I O N
139
Rear lamps
1. Third brake
lamp
(
LEDs
).
2. Brake
lamps
/
Sidelamps
(21/5 - W21W - 5 W).
3. Direction indicators
(WY21W - 21 W).
4. Reversing
lamps
(W21W - 21 W).
5. Number plate
lamps
(W5W - 5W).
6. Foglamps
(W21W - 21 W). Changing brake lamp/sidelamp and
direction indicator bulbs
T h e s e t w o b u l b s a r e c h a n g e d f r o m o u t -
s i d e w i t h t h e t a i l g a t e o p e n :
O p e n t h e t a i l g a t e ( r e f e r t o t h e " A c -
cess" section),
R e m o v e t h e t w o l a m p fi x i n g b o l t s A ,
E x t r a c t t h e l a m p u n i t f r o m o u t s i d e ,
T u r n t h e p i n C to the left and remove it.
P u l l t h e b u l b D o u t a n d c h a n g e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n
reverse order.
T u r n t h e p i n B to the left and remove it.
P u l l t h e b u l b o u t a n d c h a n g e i t . W h e n r e fi t t i n g t h e l a m p u n i t , a l i g n t h e
t w o p i n s
E w i t h t h e o p e n i n g s o n t h e v e -
hicle.
A m b e r c o l o u r e d b u l b s , s u c h a s t h e
d i r e c t i o n i n d i c a t o r s , m u s t b e r e p l a c e d
w i t h b u l b s o f i d e n t i c a l s p e c i fi c a t i o n
a n d c o l o u r .
Changing the third brake lamp
(LEDs)
A l l w o r k o n t h e L E D l a m p s m u s t b e c a r -
r i e d o u t b y a C I T R O Ë N d e a l e r .
Page 204 of 217
XI
208
A U D I O a n d T E L E M A T I C S
Equipment, contrast, traffic information (TP)
F - Choose to adjust or set the pa-rameters of certain equipment
offered in your vehicle (e.g.: un-
folding/folding of the mirrors, clos-
ing the windows on locking, timing
and sensitivity of the automatic
lighting, direction indicators mo-
torway function, ...):
F1 - to scroll up the list,
F2 - o scroll down the list,
F3 - to reinitialise all of the settings (manufacturer's settings).
Press each setting to select or change the parameters.
G - Choose to adjust the contrast of the display in relation to the ambi-
ent light level (day, night or auto-
matic).
H - Choose to activate or deactivate t h e t r a f fi c i n f o r m a t i o n ( T P ) .