2010 CHRYSLER SEBRING CONVERTIBLE turn signal bulb

[x] Cancel search: turn signal bulb

Page 167 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual If the light is flashing when the engine is running you
may experience power loss, an elevated/rough idle, and
increased brake pedal effort, and your vehicle may
require towing. Immediate service is r

Page 349 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual ▫Adding Washer Fluid ................. 366
▫ Exhaust System ..................... 366
▫ Cooling System ..................... 369
▫ Brake System ....................... 374
▫ Automatic Transm

Page 395 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual REPLACEMENT BULBS
All the inside bulbs are brass or glass wedge base.
Aluminum base bulbs are not approved and should not
be used for replacement.
LIGHT BULBS – Interior Bulb Number
Front Courtesy/R

Page 397 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual 4. Pull the bulb out of the socket and replace the bulb.
5. If the bulb comes in contact with any oily surface,
clean the bulb with rubbing alcohol.
6. Reinsert the bulb and socket assembly and rotate

Page 399 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.
3. Inst

Page 401 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual 4. Rotate the applicable bulb’s electrical connector one-
quarter turn counterclockwise and remove it from the
taillamp housing.5. Remove the bulb from the connector socket and install
the replaceme

Page 446 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual Lane Change and Turn Signals...........128,166
Lane Change Assist ...................... 128
Lap/Shoulder Belts ....................... 39
LATCH (Lower Anchors and Tether for
CHildren) ...............