2010 CHRYSLER SEBRING CONVERTIBLE engine

[x] Cancel search: engine

Page 5 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual INTRODUCTION
Congratulations on selecting your new Chrysler Group
LLC vehicle. Be assured that it represents precision
workmanship, distinctive styling, and high quality - all
essentials that are trad

Page 12 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual ▫BeltAlert Programming ................ 50
▫ Seat Belts And Pregnant Women .......... 51
▫ Seat Belt Extender ..................... 51
▫ Supplemental Restraint System (SRS) -
Airbags ........

Page 14 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual NOTE:
•If you try to remove the key before you place the shift
lever into PARK, the key may become trapped tempo-
rarily in the ignition switch lock cylinder. If this
occurs, rotate the key to the r

Page 15 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual •For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), the power window
switches, radio, hands–free system (if equipped), and
power outlets will remain active for up to 10 m

Page 16 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual The system uses ignition keys, which have an embedded
electronic chip (transponder), to prevent unauthorized
vehicle operation. Therefore, only keys that are pro-
grammed to the vehicle can be used to

Page 28 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual General Information
This device complies with part 15 of FCC rules and with
RS-210 of Industry Canada. Operation is subject to the
following conditions:
1. This device may not cause harmful interferen

Page 29 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual •Hood closed
•Trunk closed
•Hazard switch off
•Brake switch inactive (brake pedal not pressed)
•Ignition key removed from ignition switch
•Battery at an acceptable charge level, and
•RKE

Page 30 of 457

CHRYSLER SEBRING CONVERTIBLE 2010 3.G Owners Manual the ignition switch must be cycled to the ON position
before you can repeat the start sequence for a third cycle.
To Exit Remote Start Mode without Driving the
Vehicle
Press and release the REMOTE STA
Page:   1-8 9-16 17-24 25-32 33-40 ... 152 next >