2010 CHRYSLER 300 SRT warning

[x] Cancel search: warning

Page 196 of 465

CHRYSLER 300 SRT 2010 1.G Owners Manual 16. High Beam LightThis light will turn on when the high beam
headlights are ON. Push the multifunction lever
away from the steering wheel to switch the headlights to
high beam.
17. Shift Lever Indica

Page 198 of 465

CHRYSLER 300 SRT 2010 1.G Owners Manual Your vehicle has also been equipped with a TPMS
malfunction indicator to indicate when the system is not
operating properly. The TPMS malfunction indicator is
combined with the low tire pressure tellt

Page 200 of 465

CHRYSLER 300 SRT 2010 1.G Owners Manual WARNING!
A malfunctioning catalytic converter, as referenced
above, can reach higher temperatures than in normal
operating conditions. This can cause a fire if you
drive slowly or park over flammable

Page 201 of 465

CHRYSLER 300 SRT 2010 1.G Owners Manual This system conveniently allows the driver to select a
variety of useful information by pressing the switches
mounted on the steering wheel. The EVIC consists of the
following:
•System status
•Veh

Page 203 of 465

CHRYSLER 300 SRT 2010 1.G Owners Manual Electronic Vehicle Information Center (EVIC)
Displays
When the appropriate conditions exist, the EVIC displays
the following messages:
•Turn Signal On (with a continuous warning chime if
the vehicle

Page 209 of 465

CHRYSLER 300 SRT 2010 1.G Owners Manual •Elapsed Time
Shows the total elapsed time of travel since the last reset
when the ignition switch is in the ACC position. Elapsed
time will increment when the ignition switch is in the ON
or START

Page 217 of 465

CHRYSLER 300 SRT 2010 1.G Owners Manual System Warnings (Customer Information
Features)
Press and release the MENU button until “SYSTEM
WARNINGS” displays in the EVIC. Then, press the
SCROLL button to display anyone of the following
cho

Page 253 of 465

CHRYSLER 300 SRT 2010 1.G Owners Manual CAUTION!
•Leaving the iPod(or any supported device) any-
where in the vehicle in extreme heat or cold can
alter the operation or damage the device. Follow
the device manufacturer ’s guidelines.