2010 CHEVROLET CAMARO SS ESP

The vehicle’s ignition switch must
be turned to ON/RUN and then back
to LOCK/OFF using the key
before the remote start procedure
can be used again.
Shutting the Engine Off After a
Remote Start
To shut off the engine:
•Press/until the parking lamps
turn off.
•Turn on the hazard warning
flashers.
•Insert the key and turn it to
ON/RUN and then back to
LOCK/OFF.Conditions in Which Remote Start
Will Not Work
The remote start will not operate if:
•The key is in the ignition.
•The hood is not closed.
•The hazard warning flashers
are on.
•There is an emission control
system malfunction.
•The engine coolant temperature is
too high.
•The oil pressure is low.
•Two remote vehicle starts have
already been used.
•The vehicle is not in P (Park).
Door Locks
{WARNING
Unlocked doors can be
dangerous.
•Passengers, especially
children, can easily open the
doors and fall out of a moving
vehicle. The chance of being
thrown out of the vehicle in
a crash is increased if the
doors are not locked. So, all
passengers should wear
safety belts properly and
the doors should be locked
whenever the vehicle is
driven.
(Continued)
1-6 Keys, Doors and Windows

Vehicle Security
Vehicle theft is big business,
especially in some cities. This
vehicle has theft-deterrent features,
however, they do not make it
impossible to steal.
Anti-Theft Alarm System
This vehicle has an anti-theft
alarm system.
The security light is located on the
instrument panel.
Arming the System
To arm the system, pressQon the
RKE transmitter.
The alarm automatically arms after
about 30 seconds. The security
light, located on the instrument
panel, flashes.
Disarming the System
To disarm the system, do one of the
following:
•PressKon the RKE transmitter.
•Turn the ignition to ON/RUN.
The security light stays on for
approximately one second when the
vehicle is disarming.
If the system is armed when there
are people inside of the vehicle,
pulling the door handle from
the inside one time will unlock the
door. Pulling the handle a second
time will unlatch the door.
How the System Alarm is
Activated
To activate the system if it is armed,
open any door, the trunk or hood.
The horn will sound and the hazard
warning flashers will flash.
How to Turn Off the System
Alarm
To turn off the system alarm, do
one of the following:
•PressKon the RKE transmitter.
•Turn the ignition to ON/RUN.
The theft-deterrent system is
disarmed when the alarm is
turned off.
1-10 Keys, Doors and Windows

Windows
{WARNING
Leaving children, helpless adults,
or pets in a vehicle with the
windows closed is dangerous.
They can be overcome by the
extreme heat and suffer
permanent injuries or even death
from heat stroke. Never leave a
child, a helpless adult, or a pet
alone in a vehicle, especially with
the windows closed in warm or
hot weather.
Power Windows
The power window switches located
on the driver door control all
windows. The window switches on
the passenger door are only for
that window. Push the front of the
switch down to open the window.
Pull the switch up to close it.
The switches work when the ignition
is in ON/RUN, ACC/ACCESSORY,
or in Retained Accessory Power
(RAP). SeeRetained Accessory
Power (RAP) on page 8-19.
1-14 Keys, Doors and Windows

or the instrument panel... or the safety belts!
With safety belts, you slow down as
the vehicle does. You get more time
to stop. You stop over more distance,
and your strongest bones take the
forces. That is why safety belts make
such good sense.
Questions and Answers About
Safety Belts
Q:
Will I be trapped in the vehicle
after a crash if I am wearing a
safety belt?
A:Youcouldbe — whether you
are wearing a safety belt or not.
But your chance of being
conscious during and after an
accident, so youcanunbuckle
and get out, ismuchgreater if
you are belted. And you can
unbuckle a safety belt, even
if you are upside down.
Q:If my vehicle has airbags,
why should I have to wear
safety belts?
A:Airbags are supplemental
systems only; so they workwith
safety belts — not instead of
them. Whether or not an airbag
is provided, all occupants still
have to buckle up to get the most
protection. That is true not only in
frontal collisions, but especially in
side and other collisions.
Seats and Restraints 2-9

Some examples are damage to
important parts of the vehicle in a
crash, hills, tall buildings, tunnels,
weather or wireless phone network
congestion.
Your Responsibility
Increase the volume of the radio if
the OnStar advisor cannot be heard.
If the light next to the OnStar buttons
is red, the system may not be
functioning properly. Press the
OnStar button and request a vehicle
diagnostic. If the light appears clear
(no light is appearing), your OnStar
subscription has expired and all
services have been deactivated.
Press the OnStar button to confirm
that the OnStar equipment is active.Universal Remote
System
SeeRadio Frequency Statement
(US, Can) on page 12-15for
information regarding Part 15 of
the Federal Communications
Commission (FCC) Rules and
RSS-210/211 of Industry and
Science Canada.
Universal Remote
System Programming
If there is one square Light Emitting
Diode (LED) indicator light next to
the Universal Home Remote buttons,
follow the instructions below.This system provides a way to
replace up to three remote control
transmitters used to activate devices
such as garage door openers,
security systems, and home
automation devices.
Do not use the Universal Home
Remote with any garage door
opener that does not have the stop
and reverse feature. This includes
any garage door opener model
manufactured before April 1, 1982.
Read the instructions completely
before attempting to program
the Universal Home Remote.
Because of the steps involved,
it may be helpful to have another
person available to assist you
with programming the Universal
Home Remote.
Keep the original hand-held
transmitter for use in other vehicles
as well as for future Universal
Home Remote programming.
Instruments and Controls 4-45

Manual Tuning
Turn the MENU/SELECT knob to
select the frequency on the display.
Favorites List
1. Press the MENU/SELECT knob.
2. Select Favorites List.
3. Select the station.
Station Lists
1. Press the MENU/SELECT knob.
2. Select AM or FM Station List.
All receivable stations in the
current reception area are
displayed. If no station list has
been created an automatic
station search is done.
3. Select the station.Updating Station & Category Lists
If stations stored in the station list
can no longer be received.
1. Press the MENU/SELECT knob.
2. Select Update AM or FM
Station List, if the station stored
in the station list are no longer
received. A station search will be
completed and the first station
in the updated list will play.
To cancel the station search, press
the MENU/SELECT knob.
Category Lists
Most stations that broadcast an
RDS PTY code specify the type of
programming transmitted. Some
stations change the PTY code
depending on the content.The system stores the RDS stations,
sorted by program type, in the FM
category list.
To search for a programing type
determined by station:
1. Select FM category list. A list of
all programing types available
displays.
2. Select the programing type.
A list of stations that transmit
programming of the selected
type displays.
3. Select the station.
The category lists are updated when
the corresponding station lists are
updated.
Infotainment System 6-9

Storing and Retrieving
Favorites
Stations from all bands can be
stored in the favorite lists in
any order.
Up to six stations can be stored in
each favorite page and the
number of available favorite pages
can be set.
Storing a Station as a Favorite
To store the station to a position in
the list, press the corresponding
numeric button 1-6 until the station
can be heard again.
Retrieving Stations
Press the FAV button to open a
favorite page or to switch to another
favorite page. Briefly press one of
the 1-6 buttons to retrieve the
station.
Satellite Radio
Vehicles with an XM™ Satellite
Radio tuner and a valid XM Satellite
Radio subscription can receive
XM programming.
XM Satellite Radio Service
XM is a satellite radio service that
is based in the 48 contiguous
United States and 10 Canadian
provinces. XM Satellite Radio has
a wide variety of programming
and commercial-free music,
coast-to-coast, and in digital-quality
sound. During your trial or when
you subscribe, you will get unlimited
access to XM Radio Online for
when you are not in the vehicle.
A service fee is required to
receive the XM service. For more
information, contact XM at
www.xmradio.com or call
1-800-929-2100 in the U.S. and
www.xmradio.ca or call
1-877-438-9677 in Canada.
Control Buttons
The buttons used to control the
XM radio are:
RADIO/BAND:Press to turn the
radio on and choose between
AM, FM, and XM™, if equipped.
gSEEK /lSEEK:Press to
search for stations.
FAV:Press to open the
favorites list.
1-6:Press to select preset stations.
MENU/SELECT:Turn to search
for stations.
Selecting the XM Band
Press the RADIO/BAND button to
choose between the AM, FM,
and XM bands. The last station
played in that band begins to play
when that band is selected.
6-10 Infotainment System

XM Categories
XM stations are organized in
categories.
Removing or Adding Categories
1. Press the CONFIG button.
2. Select XM Categories.
3. Turn the MENU/SELECT knob to
highlight the category.
4. Press the MENU/SELECT knob
to remove or add the category.
Selecting an XM Station
XM stations can be selected by
using
gSEEK,lSEEK,
the MENU/SELECT knob, or the
menu system.To select an XM station using
gSEEK orlSEEK, do one of
the following:
•Press and releasegSEEK or
lSEEK to go to the previous
or next station.
•Press and holdgSEEK or
lSEEK to scroll through
the previous or next stations
until the station is reached.
To select an XM station using the
MENU/SELECT knob:
1. Turn the MENU/SELECT knob to
highlight an XM station.
2. Press the MENU/SELECT knob
to select the station, or leave
the station highlighted.
To select a station using the menu:
1. Press the MENU/SELECT knob.
2. Select XM Stations List.
3. Select the station.Selecting a Station by Category
1. Press the MENU/SELECT knob.
2. Select XM Category List.
A list of all programing types
available displays.
3. Select the programing type.
4. Select the station.Storing and Retrieving
Favorites
Stations from all bands can be
stored in any order in the favorite
pages.
Up to six stations can be stored
in each favorite page and the
number of available favorite pages
can be set.
Storing a Station as a Favorite
To store the station to a position
in the list, press and hold the
corresponding 1-6 button until the
station can be heard again.
Infotainment System 6-11