2010 CHEVROLET CAMARO Owners Manual

Page 105 of 378

CHEVROLET CAMARO 2010 5.G Owners Manual Black plate (23,1)Chevrolet Camaro Owner Manual - 2010
Instruments and Controls 4-23
Brake System Warning
Light
The vehicle brake system
consists of two hydraulic circuits.
If one circuit is not worki

Page 106 of 378

CHEVROLET CAMARO 2010 5.G Owners Manual Black plate (24,1)Chevrolet Camaro Owner Manual - 2010
4-24 Instruments and Controls
Antilock Brake System
(ABS) Warning Light
This light comes on briefly when the
engine is started.
If the light does

Page 107 of 378

CHEVROLET CAMARO 2010 5.G Owners Manual Black plate (25,1)Chevrolet Camaro Owner Manual - 2010
Instruments and Controls 4-25
Traction Control System
(TCS)/StabiliTrak®Light
The StabiliTrak system or the
Traction Control System (TCS)
indica

Page 108 of 378

CHEVROLET CAMARO 2010 5.G Owners Manual Black plate (26,1)Chevrolet Camaro Owner Manual - 2010
4-26 Instruments and Controls
Tire Pressure Light
For vehicles with a Tire Pressure
Monitor System, this light comes on
briefly when the engine i

Page 109 of 378

CHEVROLET CAMARO 2010 5.G Owners Manual Black plate (27,1)Chevrolet Camaro Owner Manual - 2010
Instruments and Controls 4-27
Immobilizer Light
The immobilizer light should come
on briefly as the engine is started.
If it does not come on hav

Page 110 of 378

CHEVROLET CAMARO 2010 5.G Owners Manual Black plate (28,1)Chevrolet Camaro Owner Manual - 2010
4-28 Instruments and Controls
Information Displays
Driver Information
Center (DIC)
The vehicle may have a Driver
Information Center (DIC). The DI

Page 111 of 378

CHEVROLET CAMARO 2010 5.G Owners Manual Black plate (29,1)Chevrolet Camaro Owner Manual - 2010
Instruments and Controls 4-29
Digital Speedometer
The speedometer shows how fast
the vehicle is moving in either miles
per hour (mph) or kilomete

Page 112 of 378

CHEVROLET CAMARO 2010 5.G Owners Manual Black plate (30,1)Chevrolet Camaro Owner Manual - 2010
4-30 Instruments and Controls
Unit
Move the thumbwheel up or down to
switch between US or Metric when
the Unit display is active. Press SET
to co